M2015B2B3G01 Equivalent & Substitute Parts

Part Overview

The M2015B2B3G01 is a miniature toggle switch manufactured by NKK Switches, configured as a Single Pole Double Throw (SPDT) panel mount component with On-Momentary function. This switch is rated for 0.4VA at 28V AC/DC and features a non-illuminated standard round actuator with solder lug termination. The product is classified as obsolete, making identification of equivalent and substitute parts essential for ongoing system maintenance and component procurement.

Substiute Parts

M2015B2B3G01

NKK SwitchesIn Stock: 1122M2015B2B3G01 Datasheet

Current PartRFQ

MN15B2B3G01

NKK SwitchesIn Stock: 1216MN15B2B3G01 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the M2015B2B3G01 is determined by strict equivalence across the following critical parameters:

• Circuit configuration (SPDT)
• Switch function (On-Momentary)
• Electrical ratings (0.4VA at 28V AC/DC)
• Mounting interface (Panel Mount with M12 x 1 bushing thread)
• Panel cutout dimensions (Circular 12.50mm Dia)
• Actuator specifications (Standard Round, 17.50mm length)
• Termination method (Solder Lug)
• Environmental protection (IP67)
• Operating temperature range (-30°C to 85°C)
• Regulatory compliance (ROHS3)

The MN15B2B3G01 is identified as a manufacturer-recommended substitute that maintains functional and mechanical compatibility with the obsolete M2015B2B3G01.

Parameter Comparison

Engineering Selection Recommendations

The M2015B2B3G01 is obsolete and no longer in active production. The MN15B2B3G01 is designated as the manufacturer-recommended substitute and carries active product status. Selection of the MN15B2B3G01 is supported by NKK Switches' official substitution guidance and maintains ROHS3 compliance. Both components are available from the same manufacturer, ensuring consistency in design heritage and quality standards.

Frequently Asked Questions (FAQ)

Q: Can the MN15B2B3G01 directly replace the M2015B2B3G01 in existing applications?

A: The MN15B2B3G01 is the manufacturer-recommended substitute for the M2015B2B3G01. Substitution is valid based on NKK Switches' official designation. Verify that all electrical and mechanical parameters of the substitute match your application requirements before implementation.

Q: What is the difference between the M2015B2B3G01 and MN15B2B3G01?

A: The primary difference is product status. The M2015B2B3G01 is obsolete, while the MN15B2B3G01 is active. Both are manufactured by NKK Switches and are designated as equivalent components.

Q: Are there packaging differences between these parts?

A: Both the M2015B2B3G01 and MN15B2B3G01 are supplied in bulk packaging. Packaging format does not affect functional or mechanical compatibility.

Q: What compliance certifications apply to the substitute part?

A: The MN15B2B3G01 is manufactured by NKK Switches and is subject to the same regulatory framework as the original part. Confirm specific compliance requirements with your procurement documentation.

Q: How should I verify compatibility before ordering the substitute?

A: Cross-reference the electrical ratings (0.4VA at 28V AC/DC), circuit configuration (SPDT), mounting interface (M12 x 1 panel mount), and termination style (solder lug) against your application specifications and existing design documentation.