M2013TJW01-GA-2A-C Equivalent & Substitute Parts

Part Overview

The M2013TJW01-GA-2A-C is a rocker switch manufactured by NKK Switches, featuring SPDT (Single Pole Double Throw) circuit configuration with on-off-on switch function. This component is rated for 6A at 125V AC and 3A at 30V DC, with an illuminated paddle actuator and red LED indication. The part is currently classified as obsolete, making identification of functionally equivalent alternatives necessary for ongoing system maintenance and new design implementations.

Substiute Parts

M2013TJW01-GA-2A-C

NKK SwitchesIn Stock: 1200M2013TJW01-GA-2A-C Datasheet

Current PartRFQ

MN13TJW01-GA-2A-C

NKK SwitchesIn Stock: 1180MN13TJW01-GA-2A-C Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the M2013TJW01-GA-2A-C is determined by the following critical parameters:

• Circuit configuration (SPDT)
• Switch function (On-Off-On)
• Current and voltage ratings (6A/125V AC; 3A/30V DC)
• Actuator type and illumination specifications (Paddle, LED Red, 2.8 VDC)
• Mounting configuration (Panel Mount, Snap-In)
• Termination style (Solder Lug)
• Panel cutout dimensions (15.90mm x 12.50mm)
• Operating temperature range (-30°C to 85°C)
• Mechanical and electrical life specifications

The MN13TJW01-GA-2A-C from NKK Switches meets these substitution criteria as a functionally equivalent alternative, with matching electrical ratings, circuit topology, and mechanical interface specifications.

Parameter Comparison

Engineering Selection Recommendations

The MN13TJW01-GA-2A-C is the manufacturer-recommended substitute for the obsolete M2013TJW01-GA-2A-C. Both components are manufactured by NKK Switches and share identical electrical specifications, circuit topology, and mechanical interface requirements. The substitute part carries active product status, ensuring ongoing availability and supply chain continuity.

Both parts comply with ECCN EAR99 and HTSUS 8536.50.9065 classifications. The main part is ROHS3 compliant; compliance status for the substitute should be confirmed with the manufacturer for new design implementations.

Frequently Asked Questions (FAQ)

Q: Can the MN13TJW01-GA-2A-C directly replace the M2013TJW01-GA-2A-C in existing applications?

A: Yes. Both parts share identical electrical ratings (6A/125V AC, 3A/30V DC), circuit configuration (SPDT), switch function (On-Off-On), actuator type (illuminated paddle), illumination specifications (LED red, 2.8 VDC), mounting configuration (panel mount, snap-in), and termination style (solder lug). Panel cutout dimensions and operating temperature ranges are identical.

Q: What is the primary difference between these two part numbers?

A: The M2013TJW01-GA-2A-C is classified as obsolete, while the MN13TJW01-GA-2A-C maintains active product status. The substitute ensures continued component availability and supply chain reliability.

Q: Are there any mechanical compatibility concerns when substituting these parts?

A: No. Both components feature identical panel cutout dimensions (15.90mm x 12.50mm rectangular), mounting type (snap-in), and termination style (solder lug). Direct mechanical substitution is supported without panel modifications or wiring changes.

Q: Should RoHS compliance be verified for the substitute part?

A: The main part is ROHS3 compliant. RoHS compliance status for the MN13TJW01-GA-2A-C should be confirmed with NKK Switches for applications requiring regulatory compliance documentation.

Q: Are the mechanical and electrical life ratings identical?

A: Mechanical and electrical life specifications for the substitute part are not provided in the available data. Confirmation with the manufacturer is recommended if these parameters are critical to application requirements.