M2013TJW01-FA-2A-C Equivalent & Substitute Parts

Part Overview

The M2013TJW01-FA-2A-C is a rocker switch manufactured by NKK Switches, classified as SPDT (Single Pole Double Throw) with on-off-on functionality. This panel-mount, snap-in switch is rated for 6A at 125V AC and 3A at 30V DC, featuring an illuminated black concave actuator with red LED indication. The product is currently obsolete, making identification of functionally equivalent alternatives essential for system maintenance, repair, and component sourcing.

Substiute Parts

M2013TJW01-FA-2A-C

NKK SwitchesIn Stock: 1052M2013TJW01-FA-2A-C Datasheet

Current PartRFQ

MN13TJW01-FA-2A-C

NKK SwitchesIn Stock: 1098MN13TJW01-FA-2A-C Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the M2013TJW01-FA-2A-C is determined by the following critical parameters:

• Circuit Configuration: SPDT topology must be maintained
• Switch Function: On-Off-On operation required
• Current and Voltage Ratings: Minimum 6A at 125V AC; minimum 3A at 30V DC
• Mounting Specification: Panel mount with snap-in installation
• Actuator and Illumination: Concave illuminated actuator with red LED at 2.8 VDC nominal
• Termination: Solder lug connections
• Panel Cutout Compatibility: Rectangular 15.90mm x 12.50mm opening
• Environmental and Mechanical Performance: Operating temperature -30°C to 85°C; 50,000 mechanical cycles; 25,000 electrical cycles
• Regulatory Compliance: RoHS3 compliance and CSA/UL approvals

The MN13TJW01-FA-2A-C meets all specified parameters and is classified as the manufacturer-recommended substitute.

Parameter Comparison

Engineering Selection Recommendations

The MN13TJW01-FA-2A-C is the manufacturer-recommended substitute for the obsolete M2013TJW01-FA-2A-C. Both components are manufactured by NKK Switches and share identical electrical, mechanical, and dimensional specifications. The substitute maintains full compliance with RoHS3 requirements and carries the same regulatory approvals (CSA, UL). The primary distinction is product status: the original part is obsolete while the substitute is active and available in inventory (1074 units in stock versus 956 units for the original).

For applications requiring the M2013TJW01-FA-2A-C, the MN13TJW01-FA-2A-C provides direct functional equivalence with no design modifications required. Panel cutout dimensions, solder lug termination, and all electrical parameters remain unchanged, ensuring drop-in compatibility in existing circuit designs.

Frequently Asked Questions (FAQ)

Q: Can the MN13TJW01-FA-2A-C be used as a direct replacement for the M2013TJW01-FA-2A-C?

A: Yes. Both components are SPDT rocker switches with identical current ratings (6A AC, 3A DC), voltage ratings (125V AC, 30V DC), panel cutout dimensions (15.90mm x 12.50mm), and illumination specifications (red LED, 2.8 VDC). Solder lug termination and snap-in mounting are identical, enabling direct substitution without circuit board modifications.

Q: What is the significance of the product status difference?

A: The M2013TJW01-FA-2A-C is classified as obsolete, indicating it is no longer manufactured or supported by NKK Switches. The MN13TJW01-FA-2A-C is active and currently in production, ensuring long-term availability and supply chain reliability for new designs and ongoing maintenance applications.

Q: Are there any compliance or certification differences between these parts?

A: No. Both components are RoHS3 compliant and carry identical regulatory approvals (CSA, UL). Export classification (ECCN EAR99) and tariff codes (HTSUS 8536.50.9065) are identical.

Q: What mechanical and electrical performance characteristics are maintained?

A: Both parts are rated for 50,000 mechanical cycles and 25,000 electrical cycles. Operating temperature range is -30°C to 85°C for both components. These specifications ensure equivalent reliability and service life in equivalent applications.

Q: Are the panel cutout dimensions identical?

A: Yes. Both the M2013TJW01-FA-2A-C and MN13TJW01-FA-2A-C require a rectangular panel opening of 15.90mm x 12.50mm. Existing panel installations require no modification.