M2013SS4W03 Equivalent & Substitute Parts

Part Overview

The M2013SS4W03 is a miniature toggle switch manufactured by NKK Switches, configured as a SPDT (Single Pole Double Throw) panel mount component with On-Off-On switching function. This part is classified as obsolete, making identification of functionally equivalent alternatives essential for ongoing system support and component procurement.

The M2013SS4W03 features a standard round actuator with 10.50mm length, PC pin termination, and epoxy sealed terminals. It is rated for 6A AC at 125V and 4A DC at 30V, with an operating temperature range of -30°C to 85°C and electrical life of 25,000 cycles.

Substiute Parts

M2013SS4W03

NKK SwitchesIn Stock: 768M2013SS4W03 Datasheet

Current PartRFQ

MN13SS4W03

NKK SwitchesIn Stock: 794MN13SS4W03 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the M2013SS4W03 is determined by the following critical parameters:

• Circuit Configuration: SPDT topology must be maintained
• Switch Function: On-Off-On operation required
• Current and Voltage Ratings: Minimum 6A AC at 125V and 4A DC at 30V
• Mounting Type: Panel mount configuration with M6 x 0.75 bushing thread
• Termination Style: PC pin termination
• Mechanical Compatibility: Circular 6.50mm diameter panel cutout
• Environmental Compliance: ROHS3 compliance required

The substitute part MN13SS4W03 from NKK Switches meets these criteria and is classified as an active product, providing continuity for applications requiring the M2013SS4W03 electrical and mechanical specifications.

Parameter Comparison

Engineering Selection Recommendations

The MN13SS4W03 is the designated substitute for the obsolete M2013SS4W03. Both components are manufactured by NKK Switches and share identical export classification (EAR99) and tariff codes (HTSUS 8536.50.9065), confirming regulatory alignment.

The transition from M2013SS4W03 to MN13SS4W03 is supported by:

• Active product status of the substitute, ensuring ongoing availability and manufacturing support
• Identical manufacturer origin, maintaining design consistency and quality standards
• Equivalent electrical and mechanical specifications for direct functional replacement
• ROHS3 compliance maintained across both components

Frequently Asked Questions (FAQ)

Q: Can MN13SS4W03 directly replace M2013SS4W03 in existing applications?

A: Yes. Both components are NKK Switches toggle switches with identical circuit configuration (SPDT), switch function (On-Off-On), and electrical ratings. Mechanical compatibility is maintained through equivalent panel mount specifications and PC pin termination.

Q: What is the primary reason for substitution?

A: The M2013SS4W03 is classified as obsolete. The MN13SS4W03 is an active product from the same manufacturer, providing continuity for component procurement and system support.

Q: Are there packaging differences between these parts?

A: The M2013SS4W03 packaging specification is not provided in the technical data. The MN13SS4W03 is supplied in bulk packaging. Confirm packaging requirements with your procurement specifications.

Q: Do both parts meet the same compliance standards?

A: Yes. Both components are ROHS3 compliant and share identical export classification (EAR99) and tariff codes (HTSUS 8536.50.9065).

Q: What electrical parameters must be verified for substitution?

A: Verify that your application requirements do not exceed the rated specifications: 6A AC at 125V or 4A DC at 30V. Operating temperature range of -30°C to 85°C must also be compatible with your application environment.