NKK Switches M2013SS2G40 Toggle Switch SPDT Equivalent & Substitute Parts

Part Overview

The NKK Switches M2013SS2G40 is a toggle switch with SPDT (Single Pole Double Throw) circuit configuration, rated for 0.4VA at 28V AC/DC. This through-hole, right-angle vertical mounted switch features a standard round actuator with epoxy sealed terminals and operates across a temperature range of -30°C to 85°C. The M2013SS2G40 is classified as obsolete, making equivalent substitute parts necessary for ongoing design support and procurement continuity.

Substiute Parts

M2013SS2G40

NKK SwitchesIn Stock: 1071M2013SS2G40 Datasheet

Current PartRFQ

B13AV

NKK SwitchesIn Stock: 1522B13AV Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the M2013SS2G40 is determined by strict equivalence across the following critical parameters:

• Circuit configuration: SPDT
• Switch function: On-Off-On
• Current and voltage ratings: 0.4VA at 28V AC/DC
• Mounting configuration: Through hole, right angle, vertical orientation
• Actuator type: Standard round
• Termination style: PC pin
• Operating temperature range: -30°C to 85°C
• Electrical life: 50,000 cycles minimum
• Compliance standards: ROHS3 compliant, REACH unaffected

The B13AV from NKK Switches meets all substitution criteria. While the B13AV is classified as active product status and features a slightly shorter actuator length (10.00mm versus 10.50mm), it maintains functional and electrical equivalence across all critical parameters.

Parameter Comparison

Engineering Selection Recommendations

The B13AV is the qualified substitute for the M2013SS2G40. Both components maintain identical electrical specifications, circuit configuration, and operating parameters. The B13AV carries active product status, ensuring long-term availability and supply chain continuity compared to the obsolete M2013SS2G40. Both parts are ROHS3 compliant and REACH unaffected, meeting current regulatory requirements. The 0.5mm difference in actuator length (10.00mm versus 10.50mm) does not affect electrical function or circuit compatibility. The B13AV is supplied in tray packaging, whereas the M2013SS2G40 was supplied in standard packaging.

Frequently Asked Questions (FAQ)

Q: Can the B13AV directly replace the M2013SS2G40 in existing designs?

A: Yes. The B13AV meets all electrical and mechanical substitution criteria. The 0.5mm actuator length difference does not affect switch function or panel mounting compatibility for standard applications.

Q: What is the primary reason for substitution?

A: The M2013SS2G40 is classified as obsolete. The B13AV, an active product from the same manufacturer, provides equivalent functionality with assured long-term availability.

Q: Are there compliance differences between these parts?

A: No. Both parts are ROHS3 compliant and REACH unaffected. MSL ratings are identical at level 1 (unlimited).

Q: Does packaging differ between these parts?

A: Yes. The M2013SS2G40 was supplied in standard packaging, while the B13AV is supplied in tray packaging. This does not affect component performance or electrical characteristics.

Q: Are the electrical ratings identical?

A: Yes. Both parts are rated for 0.4VA at 28V AC/DC with identical circuit configuration (SPDT), switch function (On-Off-On), and electrical life (50,000 cycles).