M2013SS1W02 Toggle Switch SPDT Equivalent & Substitute Parts

Part Overview

The M2013SS1W02 is an NKK Switches toggle switch with SPDT (Single Pole Double Throw) configuration, rated for 6A at 125V AC and 3A at 30V DC. This component features panel mount installation with a standard round actuator and quick connect termination. The part is classified as obsolete, making identification of equivalent and substitute parts essential for ongoing maintenance, repair, and design continuity in applications requiring SPDT toggle switching functionality.

Substiute Parts

M2013SS1W02

NKK SwitchesIn Stock: 1142M2013SS1W02 Datasheet

Current PartRFQ

M2013SS1W01

NKK SwitchesIn Stock: 861M2013SS1W01 Datasheet

MFR RecommendedRFQ

2M1-SP3-T1-B1-M2QE

Carling TechnologiesIn Stock: 11992M1-SP3-T1-B1-M2QE Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the M2013SS1W02 is determined by the following critical parameters:

Primary Compatibility Criteria:

• Circuit configuration (SPDT required)
• Switch function (On-Off-On)
• Mounting type (Panel Mount)
• Panel cutout dimensions (Circular - 6.50mm Dia or compatible)
• Bushing thread (1/4-40)
• Operating temperature range (-30°C ~ 85°C minimum)
• RoHS3 compliance

Electrical Performance Criteria:

• Current rating must meet or exceed 6A AC / 3A DC
• Voltage rating must meet or exceed 125V AC / 30V DC
• Actuator type and length must be compatible with panel interface

Acceptable Variations:

• Termination style may differ (Quick Connect, Solder Lug, PC Pin) provided mechanical and electrical interfaces are compatible
• Electrical life rating may exceed specification
• Ingress protection rating may exceed specification
• Manufacturer may differ provided all electrical and mechanical parameters are met

Parameter Comparison

Engineering Selection Recommendations

M2013SS1W01 (NKK Switches) - Manufacturer Recommended Substitute

The M2013SS1W01 is the primary equivalent from NKK Switches. It maintains identical electrical ratings (6A AC / 3A DC, 125V AC / 30V DC), mechanical interface (panel mount, 1/4-40 bushing, 6.50mm cutout), and operating temperature range. The only difference is termination style (Solder Lug vs. Quick Connect). Both parts are ROHS3 compliant and share the same base product number (M2013SS). This part is also classified as obsolete but remains available in inventory.

2M1-SP3-T1-B1-M2QE (Carling Technologies) - Cross-Manufacturer Substitute

The Carling Technologies 2M1-SP3-T1-B1-M2QE provides functional equivalence with notable enhancements. It maintains SPDT configuration, On-Off-On function, and compatible mechanical interface (panel mount, 1/4-40 bushing, 6.35mm cutout). The AC voltage rating (125V) and operating temperature range (-30°C ~ 85°C) are identical. The AC current rating is 5A (versus 6A), which represents a 17% reduction. However, the DC current rating is 5A (versus 3A), providing enhanced DC performance. The DC voltage rating is 28V (versus 30V), a 7% reduction. This part features superior electrical life (50,000 cycles versus 25,000), IP67 ingress protection, and active product status. Termination is PC Pin rather than Quick Connect. ROHS3 compliance is maintained.

Selection Criteria:

• For direct form-fit-function replacement with identical electrical specifications, select M2013SS1W01
• For applications requiring enhanced durability, environmental sealing, or improved DC performance, select 2M1-SP3-T1-B1-M2QE
• Verify termination compatibility with existing circuit board or wiring harness design
• Confirm panel cutout dimensions accommodate the selected substitute

Frequently Asked Questions (FAQ)

Q: Can M2013SS1W01 be used as a direct replacement for M2013SS1W02?

A: Yes. Both parts share identical electrical ratings (6A AC / 3A DC, 125V AC / 30V DC), mechanical interface (panel mount, 1/4-40 bushing, 6.50mm cutout), and operating temperature range. The difference is termination style: M2013SS1W02 uses Quick Connect while M2013SS1W01 uses Solder Lug. Compatibility depends on your circuit board or wiring harness design.

Q: Is the Carling Technologies 2M1-SP3-T1-B1-M2QE a suitable substitute?

A: The Carling part is functionally equivalent for SPDT On-Off-On switching applications. However, the AC current rating is 5A (versus 6A), and the DC voltage rating is 28V (versus 30V). Applications operating at the maximum 6A AC or 30V DC specification of the original part may not be compatible. The Carling part offers advantages including IP67 sealing, 50,000-cycle electrical life, and active product status.

Q: What are the critical parameters for substitution?

A: SPDT circuit configuration, On-Off-On function, panel mount installation, 1/4-40 bushing thread, and 6.50mm panel cutout diameter are non-negotiable. Electrical ratings (6A AC minimum, 125V AC minimum) and operating temperature range (-30°C ~ 85°C) must be met or exceeded. Termination style may vary based on application requirements.

Q: Why is the M2013SS1W02 classified as obsolete?

A: Obsolete status indicates the part is no longer manufactured by NKK Switches. Existing inventory remains available, but long-term supply cannot be guaranteed. Identifying and qualifying substitute parts ensures design continuity and supply chain reliability.

Q: Does termination style affect electrical performance?

A: Termination style does not affect electrical performance characteristics. Quick Connect, Solder Lug, and PC Pin terminations all provide equivalent electrical connectivity. Selection depends on mechanical integration with your specific circuit board or wiring harness design.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. Both M2013SS1W01 and 2M1-SP3-T1-B1-M2QE are ROHS3 compliant, matching the compliance status of the original M2013SS1W02.