M2013SS1W01-CB Toggle Switch SPDT Equivalent & Substitute Parts

Part Overview

The M2013SS1W01-CB is an NKK Switches toggle switch with SPDT (Single Pole Double Throw) configuration, rated for 6A at 125V AC and 3A at 30V DC. This panel-mount switch features a standard round actuator with white cap and solder lug termination. The product is classified as obsolete, making equivalent and substitute parts necessary for ongoing system maintenance and new design implementations.

Key Parameters

Parameter	Value
Manufacturer Part Number	M2013SS1W01-CB
Manufacturer	NKK Switches
Circuit Configuration	SPDT
Switch Function	On-Off-On
Current Rating (AC)	6A
Current Rating (DC)	3A
Voltage Rating (AC)	125V
Voltage Rating (DC)	30V
Mounting Type	Panel Mount
Termination Style	Solder Lug
Panel Cutout Diameter	6.50mm
Bushing Thread	1/4-40
Operating Temperature Range	-30°C to 85°C
Electrical Life	25,000 Cycles
RoHS Status	ROHS3 Compliant
Product Status	Obsolete

Substitute Part Grouping Explanation

Substitution for the M2013SS1W01-CB is determined by the following critical parameters:

Electrical Compatibility Requirements:

Circuit configuration must be SPDT
Switch function must be On-Off-On
Current and voltage ratings must meet or exceed application requirements
Termination style must be solder lug for PCB integration

Mechanical Compatibility Requirements:

Panel cutout diameter must accommodate 6.35mm or 6.50mm circular openings
Bushing thread must be 1/4-40
Mounting type must be panel mount
Operating temperature range must cover -30°C to 85°C

Regulatory Compliance:

RoHS3 compliance required
ECCN and HTSUS classifications must align with export requirements

Substitute parts are grouped into two categories:

Direct Manufacturer Equivalent: MN13SS1W01-CB (NKK Switches) maintains identical electrical and mechanical specifications with active product status.

Cross-Manufacturer Alternatives: C&K 7000 series toggle switches (7103L1 and 7103L2 base numbers) provide functional equivalence with variations in current rating, actuator type, and actuator length. These parts maintain SPDT configuration, panel mount design, 1/4-40 bushing thread, and solder lug termination.

Parameter Comparison

Part Number	Manufacturer	Circuit	Current (AC)	Voltage (AC)	Voltage (DC)	Actuator Type	Actuator Length (mm)	Panel Cutout (mm)	Electrical Life	Product Status
M2013SS1W01-CB	NKK Switches	SPDT	6A	125V	30V	Standard Round	13.10	6.50	25,000	Obsolete
MN13SS1W01-CB	NKK Switches	SPDT	6A	125V	30V	Standard Round	13.10	6.50	25,000	Active
7103L1H3ZGE	C&K	SPDT	5A	120V	28V	Standard Round	15.75	6.35	40,000	Active
7103L1HZGE	C&K	SPDT	5A	120V	28V	Standard Round	16.26	6.35	40,000	Active
7103L1PH3ZQE	C&K	SPDT	5A	120V	28V	Anti-Rotation	15.75	6.35	40,000	Active
7103L1PHZBE	C&K	SPDT	0.4VA	20V	20V	Anti-Rotation	16.26	6.35	40,000	Active
7103L1PY1ZGE	C&K	SPDT	5A	120V	28V	Anti-Rotation	16.26	6.35	40,000	Active
7103L2HZQE	C&K	SPDT	5A	120V	28V	Standard Round	16.26	6.35	40,000	Active
7103L2PHZBE	C&K	SPDT	0.4VA	20V	20V	Anti-Rotation	13.97	6.35	40,000	Active
7103P1H3ZBE	C&K	SPDT	0.4VA	20V	20V	Flat Anti-Rotation	20.82	6.35	40,000	Active
7103P1H3ZQE	C&K	SPDT	5A	120V	28V	Flat Anti-Rotation	20.82	6.35	40,000	Active

Engineering Selection Recommendations

Primary Recommendation: MN13SS1W01-CB

The MN13SS1W01-CB is the direct NKK Switches equivalent with identical electrical specifications (6A at 125V AC, 3A at 30V DC), mechanical configuration, and panel cutout dimensions. This part maintains active product status and ROHS3 compliance, eliminating design re-qualification requirements. Selection of this part is appropriate for direct replacement in existing applications.

Secondary Recommendations: C&K 7000 Series (5A/120V AC variants)

The C&K 7103L1H3ZGE, 7103L1HZGE, 7103L1PH3ZQE, 7103L1PY1ZGE, 7103L2HZQE, and 7103P1H3ZQE are suitable for applications where the M2013SS1W01-CB current and voltage ratings exceed actual system requirements. These parts provide:

Equivalent SPDT circuit configuration and On-Off-On function
Reduced current rating (5A AC/DC vs. 6A AC/3A DC) suitable for lower-power applications
Reduced voltage rating (120V AC/28V DC vs. 125V AC/30V DC) acceptable for standard industrial circuits
Enhanced electrical life (40,000 cycles vs. 25,000 cycles)
Active product status with ROHS3 compliance
Panel cutout diameter of 6.35mm requires verification against existing panel openings

Not Recommended: C&K 7000 Series (0.4VA/20V variants)

The 7103L1PHZBE, 7103L2PHZBE, and 7103P1H3ZBE are rated for 0.4VA at 20V AC/DC and are suitable only for low-power signal switching applications. These parts are not appropriate for the 6A/125V AC application profile of the M2013SS1W01-CB.

Frequently Asked Questions (FAQ)

Q: Can the MN13SS1W01-CB directly replace the M2013SS1W01-CB without design changes?

A: Yes. The MN13SS1W01-CB maintains identical electrical ratings, mechanical dimensions, and termination style. No circuit or panel modifications are required.

Q: What is the primary difference between the M2013SS1W01-CB and C&K 7103L series substitutes?

A: The M2013SS1W01-CB is rated for 6A at 125V AC, while the C&K 7103L series (5A/120V variants) have lower current and voltage ratings. The C&K parts also feature a 6.35mm panel cutout diameter versus the 6.50mm of the original part. Selection depends on actual application power requirements and panel opening dimensions.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All listed substitute parts carry ROHS3 compliance certification, meeting regulatory requirements for hazardous substance restrictions.

Q: What is the significance of actuator type differences (Standard Round vs. Anti-Rotation vs. Flat Anti-Rotation)?

A: Actuator type affects mechanical engagement and resistance to unintended rotation. Standard Round actuators provide basic toggle function. Anti-Rotation designs prevent accidental rotation during operation. Flat Anti-Rotation designs provide additional mechanical stability. Selection depends on panel mounting orientation and operational environment.

Q: Why do C&K 7000 series parts have longer electrical life (40,000 cycles vs. 25,000 cycles)?

A: Extended electrical life reflects design improvements in contact materials and switching mechanisms. This provides additional margin for applications with frequent switching cycles.

Q: Can the 7103P1H3ZQE with 20.82mm actuator length be used in applications designed for the 13.10mm M2013SS1W01-CB?

A: No. The significantly longer actuator length requires panel space verification and may interfere with adjacent components or enclosure geometry. Mechanical compatibility must be confirmed before substitution.

Q: What packaging options are available for substitute parts?

A: The MN13SS1W01-CB is available in Bulk packaging. C&K 7000 series parts are available in both Bulk and standard packaging configurations. Packaging selection depends on procurement and inventory management requirements.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message