M2013LL2G13 Equivalent & Substitute Parts

Part Overview

The M2013LL2G13 is a toggle switch manufactured by NKK Switches, configured as a Single Pole Double Throw (SPDT) with On-Off-On switching function. This through-hole mounted component is rated for 0.4VA at 28V AC/DC operation with a locking lever actuator. The product is currently obsolete, making identification of functionally equivalent alternatives essential for ongoing maintenance, repair, and legacy system support.

Substiute Parts

M2013LL2G13

NKK SwitchesIn Stock: 677M2013LL2G13 Datasheet

Current PartRFQ

MN13LL2G13

NKK SwitchesIn Stock: 779MN13LL2G13 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the M2013LL2G13 is determined by strict equivalence across the following critical parameters:

• Circuit Configuration: SPDT topology must be maintained
• Switch Function: On-Off-On operation required
• Electrical Ratings: 0.4VA at 28V AC/DC minimum
• Mounting Interface: Through-hole PC pin termination
• Actuator Specification: Locking lever with 16.50mm length
• Operating Temperature: -30°C to 85°C range compatibility
• Electrical Life: 50,000 cycle minimum endurance

The substitute part MN13LL2G13 is identified as an equivalent based on manufacturer designation and functional compatibility within the NKK Switches product family.

Parameter Comparison

Engineering Selection Recommendations

The MN13LL2G13 is identified as the manufacturer-designated substitute for the obsolete M2013LL2G13. Selection of this alternative is supported by:

• Active Product Status: MN13LL2G13 maintains current production and availability, ensuring supply chain continuity
• Manufacturer Consistency: Both components are manufactured by NKK Switches, ensuring design and quality alignment
• Compliance Equivalence: Both parts maintain ROHS3 compliance and EAR99 export classification
• Functional Designation: The substitute designation by the original manufacturer indicates electrical and mechanical compatibility

For applications requiring the M2013LL2G13, the MN13LL2G13 provides direct functional replacement with the advantage of active product status and ongoing manufacturer support.

Frequently Asked Questions (FAQ)

Q: Why is the M2013LL2G13 no longer available?

A: The M2013LL2G13 has reached end-of-life status and is classified as obsolete. The manufacturer has transitioned production to the MN13LL2G13, which serves as the active equivalent.

Q: What does SPDT circuit configuration mean?

A: SPDT (Single Pole Double Throw) indicates the switch has one input terminal that can be connected to either of two output terminals. The On-Off-On function allows three distinct switching positions.

Q: Are the M2013LL2G13 and MN13LL2G13 electrically identical?

A: Both components are designated as equivalents by NKK Switches. The MN13LL2G13 is the active production replacement for the obsolete M2013LL2G13.

Q: What is the significance of the 16.50mm actuator length?

A: The actuator length determines the physical engagement profile and panel mounting depth. This dimension must be matched for mechanical compatibility in existing panel cutouts and enclosure designs.

Q: Can the M2013LL2G13 be used in new designs?

A: No. As an obsolete product, the M2013LL2G13 should not be specified for new designs. The MN13LL2G13 is the recommended selection for all new applications requiring this switch function.

Q: What does "Locking Lever" actuator type mean?

A: A locking lever actuator maintains its position after actuation without requiring continuous manual pressure. This is essential for On-Off-On applications where stable switching states are required.

Q: Are both parts RoHS compliant?

A: The M2013LL2G13 is confirmed ROHS3 compliant. Compliance status for the MN13LL2G13 is not specified in available data; verification with the manufacturer is recommended for critical applications.