Request Quote
(Ships tomorrow)
M2012TXG41-DF Rocker Switch SPDT Equivalent & Substitute Parts
Part Overview
The M2012TXG41-DF is a rocker switch manufactured by NKK Switches, classified as SPDT (Single Pole Double Throw) with On-On functionality. This through-hole mounted component is rated for 0.4VA at 28V AC/DC with a green concave actuator and PC pin termination. The product is currently obsolete, necessitating identification of functionally equivalent alternatives from active product lines that maintain electrical and mechanical compatibility within specified parameter ranges.
Substiute Parts
Key Parameters
| Parameter | M2012TXG41-DF Value |
|---|---|
| Manufacturer | NKK Switches |
| Circuit Configuration | SPDT |
| Switch Function | On-On |
| Current Rating | 0.4VA (AC/DC) |
| Voltage Rating - AC | 28V |
| Voltage Rating - DC | 28V |
| Mounting Type | Through Hole, Right Angle, Vertical |
| Actuator Type | Concave (Standard V) |
| Termination Style | PC Pin |
| Operating Temperature | -30°C ~ 85°C |
| Mechanical Life | 50,000 Cycles |
| Electrical Life | 50,000 Cycles |
| RoHS Status | ROHS3 Compliant |
| Product Status | Obsolete |
Substitute Part Grouping Explanation
Substitution eligibility for the M2012TXG41-DF is determined by the following critical parameters:
Mandatory Matching Parameters:
- Circuit Configuration: SPDT
- Switch Function: On-On
- Current Rating: 0.4VA (AC/DC)
- Voltage Rating - AC: 28V minimum
- Voltage Rating - DC: 28V minimum
- Mounting Type: Through Hole, Right Angle, Vertical
- Actuator Type: Concave (Standard V)
- Termination Style: PC Pin
- Operating Temperature Range: -30°C ~ 85°C or equivalent
Allowable Variations:
- Actuator color (green, black, gray, red acceptable)
- Electrical life rating (minimum 40,000 cycles acceptable)
- Mechanical life rating (when not specified, not a limiting factor)
- Packaging format (bulk or tray)
- Manufacturer (NKK Switches, E-Switch, C&K acceptable)
Substitute parts must maintain all mandatory parameters to ensure direct functional replacement without circuit redesign or mechanical modification.
Parameter Comparison
| Part Number | Manufacturer | Circuit | Current Rating | Voltage AC | Voltage DC | Mounting Type | Actuator Type | Termination | Operating Temp | Electrical Life | Product Status |
|---|---|---|---|---|---|---|---|---|---|---|---|
| M2012TXG41-DF | NKK Switches | SPDT | 0.4VA | 28V | 28V | Through Hole, Right Angle, Vertical | Concave (Standard V) | PC Pin | -30°C ~ 85°C | 50,000 | Obsolete |
| MN12TXG41-DF | NKK Switches | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Active |
| 300SP1J1BLKM7RE | E-Switch | SPDT | 0.4VA | 20V | 20V | Through Hole, Right Angle, Vertical | Concave (Standard V) | PC Pin | -30°C ~ 85°C | 40,000 | Active |
| 300SP1J1GRYM7RE | E-Switch | SPDT | 0.4VA | 20V | 20V | Through Hole, Right Angle, Vertical | Concave (Standard V) | PC Pin | -30°C ~ 85°C | 40,000 | Active |
| 7101J1AV2BE2 | C&K | SPDT | 0.4VA | 20V | 20V | Through Hole, Right Angle, Vertical | Concave (Standard V) | PC Pin | -30°C ~ 85°C | 100,000 | Active |
| 7101J1AV2PE2 | C&K | SPDT | 0.4VA | 20V | 20V | Through Hole, Right Angle, Vertical | Concave (Standard V) | PC Pin | -30°C ~ 85°C | 100,000 | Active |
| 7101J1AV3BE3 | C&K | SPDT | 0.4VA | 20V | 20V | Through Hole, Right Angle, Vertical | Concave (Standard V) | PC Pin | -30°C ~ 85°C | 100,000 | Active |
Engineering Selection Recommendations
Primary Substitute - MN12TXG41-DF (NKK Switches): This part maintains NKK Switches manufacturer continuity and active product status. Detailed electrical specifications are not provided in available documentation; however, as a direct NKK Switches model variant, it represents the preferred substitution path for maintaining original design intent and supply chain consistency.
Secondary Substitutes - E-Switch 300 Series (300SP1J1BLKM7RE, 300SP1J1GRYM7RE): These E-Switch components provide SPDT On-On functionality with 0.4VA current rating, through-hole right-angle vertical mounting, PC pin termination, and -30°C to 85°C operating temperature range. Voltage rating is 20V AC/DC, which is lower than the original 28V specification. These parts are active products with ROHS3 compliance and 40,000-cycle electrical life rating. Substitution is acceptable only in applications where circuit voltage does not exceed 20V.
Tertiary Substitutes - C&K 7000 Series (7101J1AV2BE2, 7101J1AV2PE2, 7101J1AV3BE3): These C&K components match all critical electrical and mechanical parameters: SPDT On-On circuit, 0.4VA current rating, 20V AC/DC voltage, through-hole right-angle vertical mounting, concave actuator, and PC pin termination. Operating temperature range is -30°C to 85°C. Electrical life exceeds the original specification at 100,000 cycles. All are active products with ROHS3 compliance and cULus approval. Substitution is acceptable only in applications where circuit voltage does not exceed 20V.
Non-Qualifying Parts: Parts 7101J1AV2GE2, 7101J1AV2QE2, 7101J1AV3QE2, and E101J1AV2QE2 exceed the original current rating specification (5A or 7.5A versus 0.4VA) and are not direct substitutes.
Frequently Asked Questions (FAQ)
Q: Can the M2012TXG41-DF be replaced with the MN12TXG41-DF? A: MN12TXG41-DF is listed as a direct substitute from NKK Switches with active product status. However, complete electrical specifications are not provided in available documentation. Verification with the manufacturer is recommended before design implementation.
Q: What is the voltage limitation when using E-Switch or C&K substitutes? A: The E-Switch 300 series and C&K 7000 series substitutes are rated for 20V AC/DC, compared to the original 28V specification. These parts are suitable only for applications operating at 20V or below. Applications requiring 28V operation must use the MN12TXG41-DF or equivalent 28V-rated alternatives.
Q: Are the E-Switch and C&K substitutes mechanically compatible? A: Yes. Both E-Switch 300 series and C&K 7000 series maintain identical mounting configuration (through-hole, right-angle, vertical), actuator type (concave standard V), and termination style (PC pin) as the original M2012TXG41-DF. Panel cutout dimensions for C&K parts are specified as 17.96mm x 10.62mm rectangular.
Q: What is the difference in electrical life between the original and substitute parts? A: The original M2012TXG41-DF specifies 50,000 electrical cycles. E-Switch 300 series substitutes provide 40,000 cycles, while C&K 7000 series substitutes provide 100,000 cycles. For applications requiring minimum 50,000-cycle life, only C&K 7000 series parts meet or exceed this specification.
Q: Are all substitute parts RoHS3 compliant? A: Yes. The MN12TXG41-DF, E-Switch 300 series, and C&K 7000 series are all ROHS3 compliant. The original M2012TXG41-DF is also ROHS3 compliant.
Q: What certifications apply to the substitute parts? A: MN12TXG41-DF carries CSA and UL approvals (inherited from original design). E-Switch 300 series certification information is not provided. C&K 7000 series carries cULus approval. Application requirements for specific certifications should be verified before substitution.
Q: Can actuator color be changed during substitution? A: Yes. The original M2012TXG41-DF features a green actuator. Substitutes are available with black, gray, or red actuators. Actuator color does not affect electrical function and may be selected based on panel design requirements.
Alternative Parts
SJ6012L2TP
Littelfuse Inc.
6 Alternative Parts
JMK107BBJ476MA-RE
Taiyo Yuden
10 Alternative Parts
GMK107BBJ475MA-T
Taiyo Yuden
5 Alternative Parts
SJ6020N2ARP
Littelfuse Inc.
3 Alternative Parts
SJ6025R2ATP
Littelfuse Inc.
4 Alternative Parts
2474-05L
API Delevan Inc.
1 Alternative Parts
4590R-684K
API Delevan Inc.
1 Alternative Parts
CM6560R-334
API Delevan Inc.
1 Alternative Parts
CM6460-104
API Delevan Inc.
1 Alternative Parts
5526-12
API Delevan Inc.
1 Alternative Parts