M2012TXG30-GA Equivalent & Substitute Parts

Part Overview

The M2012TXG30-GA is a rocker switch manufactured by NKK Switches, classified as SPDT (Single Pole Double Throw) with a paddle actuator. This through-hole, right-angle mounted switch is rated for 0.4VA at 28V AC/DC and features epoxy sealed PC pin terminals. The product is currently obsolete, making identification of compatible substitute components essential for ongoing system support and maintenance applications.

Substiute Parts

M2012TXG30-GA

NKK SwitchesIn Stock: 1004M2012TXG30-GA Datasheet

Current PartRFQ

MN12TXG30-GA

NKK SwitchesIn Stock: 924MN12TXG30-GA Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the M2012TXG30-GA is determined by the following critical parameters:

• Circuit configuration (SPDT)
• Switch function (On-On)
• Current and voltage ratings (0.4VA at 28V AC/DC)
• Mounting type (Through Hole, Right Angle)
• Actuator type (Paddle)
• Termination style (PC Pin)
• Operating temperature range (-30°C to 85°C)
• Mechanical and electrical life ratings (50,000 cycles minimum)

The MN12TXG30-GA is identified as a manufacturer-recommended substitute. Both components share the same base product family lineage (M/MN series from NKK Switches) and are classified within the same electrical switch category. The substitute maintains compatibility with the specified electrical parameters and mounting requirements of the original design.

Parameter Comparison

Engineering Selection Recommendations

The M2012TXG30-GA is obsolete; therefore, the MN12TXG30-GA is the manufacturer-recommended substitute for new designs and replacement applications. The substitute is currently in active production status with confirmed inventory availability (896 pcs), ensuring supply chain continuity.

Both components are manufactured by NKK Switches and share identical ECCN (EAR99) and HTSUS (8536.50.9065) classifications, confirming regulatory alignment. The main part carries CSA and UL approvals; compliance documentation for the substitute should be verified during procurement to ensure certification requirements are met for the target application.

The transition from the M-series to the MN-series represents a product line evolution within NKK Switches' rocker switch portfolio. Selection of the MN12TXG30-GA is appropriate for applications requiring SPDT on-on functionality at 28V with 0.4VA capacity and through-hole right-angle mounting.

Frequently Asked Questions (FAQ)

Q: Why is the M2012TXG30-GA no longer available? A: The M2012TXG30-GA is classified as obsolete. NKK Switches has transitioned this product line to the active MN-series equivalent, represented by the MN12TXG30-GA.

Q: Are the M2012TXG30-GA and MN12TXG30-GA electrically interchangeable? A: Both components are SPDT rocker switches from NKK Switches with matching ECCN and HTSUS classifications. Electrical compatibility is determined by circuit configuration, voltage rating (28V), and current capacity (0.4VA). Detailed electrical specifications for the MN12TXG30-GA should be cross-referenced with application requirements.

Q: What are the key differences between these two part numbers? A: The primary difference is product status: M2012TXG30-GA is obsolete, while MN12TXG30-GA is active production. The MN-series represents the current product line offering from NKK Switches. Packaging differs (standard vs. bulk), and the substitute's full technical specifications should be confirmed against the original design requirements.

Q: Can I use the MN12TXG30-GA as a direct replacement in existing assemblies? A: Mechanical and electrical compatibility must be verified. Both components feature through-hole right-angle mounting and PC pin termination. Confirm that the substitute's physical dimensions, pin configuration, and electrical ratings align with the PCB layout and circuit requirements of the original design.

Q: What certifications apply to the substitute part? A: The main part carries CSA and UL approvals. Certification status for the MN12TXG30-GA should be obtained from NKK Switches technical documentation to ensure compliance with target application standards.