M2012TXG13 Equivalent & Substitute Parts

Part Overview

The M2012TXG13 is a rocker switch manufactured by NKK Switches, featuring SPDT (Single Pole Double Throw) configuration with 0.4VA rated capacity at 28V AC/DC. This through-hole mounted component is designed for applications requiring reliable switching with epoxy sealed terminals and mechanical durability rated at 50,000 cycles.

The M2012TXG13 is classified as obsolete. Identifying equivalent and substitute parts is necessary to maintain design continuity, ensure supply chain availability, and support ongoing production or maintenance requirements for systems utilizing this component.

Substiute Parts

M2012TXG13

NKK SwitchesIn Stock: 9213M2012TXG13 Datasheet

Current PartRFQ

MN12TXG13

NKK SwitchesIn Stock: 778MN12TXG13 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the M2012TXG13 is determined by the following critical parameters:

• Circuit configuration (SPDT)
• Electrical rating (0.4VA at 28V AC/DC)
• Mechanical life specification (50,000 cycles minimum)
• Electrical life specification (50,000 cycles minimum)
• Termination compatibility (PC Pin)
• Regulatory compliance (CSA, UL certification)
• Operating temperature range (-30°C to 85°C)

The substitute part MN12TXG13 is identified as a manufacturer-recommended equivalent from NKK Switches. Both parts share the same base product family designation (M/MN series) and are manufactured by the same supplier, ensuring design and functional compatibility within the specified electrical and mechanical parameters.

Parameter Comparison

Engineering Selection Recommendations

The MN12TXG13 is designated as the manufacturer-recommended substitute for the obsolete M2012TXG13. Selection of this substitute part is supported by:

• Active product status, ensuring continued availability and supply chain support
• Identical manufacturer (NKK Switches), guaranteeing design consistency and quality standards
• Shared ECCN and HTSUS classifications, confirming regulatory and trade alignment
• Manufacturer recommendation, indicating validated functional equivalence

For applications currently utilizing the M2012TXG13, transition to the MN12TXG13 is the appropriate path forward to maintain component availability and system continuity.

Frequently Asked Questions (FAQ)

Q: Why is the M2012TXG13 listed as obsolete?

A: The M2012TXG13 has reached end-of-life status with the manufacturer. The MN12TXG13 represents the active replacement within the NKK Switches product portfolio.

Q: Are the M2012TXG13 and MN12TXG13 electrically equivalent?

A: Both parts are manufactured by NKK Switches and share the same base product family designation. The manufacturer identifies MN12TXG13 as the recommended substitute, indicating functional equivalence for the specified electrical parameters.

Q: What is the difference in packaging between these parts?

A: The M2012TXG13 is supplied in tray packaging, while the MN12TXG13 is supplied in bulk packaging. Packaging selection should be based on procurement volume and handling requirements.

Q: Can I use MN12TXG13 as a direct replacement in existing designs?

A: The MN12TXG13 is the manufacturer-recommended equivalent. Design validation should confirm compatibility with your specific application requirements, particularly regarding mounting configuration and termination interface.

Q: Are both parts RoHS compliant?

A: The M2012TXG13 is ROHS3 compliant. Compliance information for the MN12TXG13 should be verified through the manufacturer's current technical documentation.