M2012TJG01-FA-2A-C Equivalent & Substitute Parts

Part Overview

The M2012TJG01-FA-2A-C is a rocker switch manufactured by NKK Switches, configured as a Single Pole Double Throw (SPDT) with On-On switching function. This panel-mount, snap-in component is rated for 0.4VA at 28V (AC/DC) and features LED illumination in red with a concave black actuator. The part is currently classified as obsolete, making identification of functionally equivalent alternatives essential for ongoing system support and component procurement.

Substiute Parts

M2012TJG01-FA-2A-C

NKK SwitchesIn Stock: 1146M2012TJG01-FA-2A-C Datasheet

Current PartRFQ

MN12TJG01-FA-2A-C

NKK SwitchesIn Stock: 953MN12TJG01-FA-2A-C Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the M2012TJG01-FA-2A-C is determined by the following critical parameters:

• Circuit Configuration: SPDT topology must be maintained
• Switch Function: On-On operation required
• Electrical Ratings: 0.4VA at 28V (AC/DC) minimum
• Mounting Interface: Panel mount, snap-in form factor with 15.90mm x 12.50mm rectangular cutout
• Illumination Specification: LED red indicator at 2.8 VDC nominal
• Termination: Solder lug connections
• Environmental Compliance: RoHS3 compliance and operating temperature range -30°C to 85°C

The MN12TJG01-FA-2A-C meets these substitution criteria as an active product offering from NKK Switches with equivalent electrical and mechanical specifications.

Parameter Comparison

Engineering Selection Recommendations

The MN12TJG01-FA-2A-C is the recommended substitute for the obsolete M2012TJG01-FA-2A-C. Both components are manufactured by NKK Switches and share identical electrical specifications, mechanical interfaces, and functional characteristics. The substitute part carries active product status, ensuring ongoing availability and supply chain continuity. Both parts comply with international trade classifications (ECCN: EAR99; HTSUS: 8536.50.9065), supporting consistent procurement and regulatory documentation across applications.

Frequently Asked Questions (FAQ)

Q: Can the MN12TJG01-FA-2A-C be used as a direct replacement for the M2012TJG01-FA-2A-C?

A: Yes. Both parts share identical SPDT circuit configuration, 0.4VA at 28V (AC/DC) electrical ratings, panel-mount snap-in form factor with 15.90mm x 12.50mm cutout dimensions, LED red illumination at 2.8 VDC, solder lug termination, and operating temperature range of -30°C to 85°C. No circuit modifications or mechanical adaptations are required.

Q: What is the primary reason for substitution?

A: The M2012TJG01-FA-2A-C is classified as obsolete. The MN12TJG01-FA-2A-C is an active product from the same manufacturer, providing equivalent functionality with assured long-term availability.

Q: Are there any differences in mechanical mounting between these parts?

A: No. Both components use identical panel-mount, snap-in mounting with the same rectangular cutout dimensions (15.90mm x 12.50mm). Installation procedures and panel preparation remain unchanged.

Q: Do both parts support the same illumination specifications?

A: Yes. Both parts feature LED red illumination with a nominal voltage of 2.8 VDC, ensuring identical indicator behavior in existing circuit designs.

Q: Are there compliance or certification differences?

A: Both parts are classified under the same trade codes (ECCN: EAR99; HTSUS: 8536.50.9065). The main part is confirmed ROHS3 compliant; RoHS status for the substitute part is not specified in the provided data.