M2012S2D3G01 Equivalent & Substitute Parts

Part Overview

The M2012S2D3G01 is a toggle switch manufactured by NKK Switches, configured as a Single Pole Double Throw (SPDT) panel mount switch with a 0.4VA rating at 28V AC/DC. This component features a non-illuminated standard round actuator with solder lug termination and IP67 ingress protection rating. The product is classified as obsolete, making identification of equivalent substitute parts essential for ongoing system maintenance and component procurement.

Substiute Parts

M2012S2D3G01

NKK SwitchesIn Stock: 5064M2012S2D3G01 Datasheet

Current PartRFQ

MN12S2D3G01

NKK SwitchesIn Stock: 1231MN12S2D3G01 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the M2012S2D3G01 is based on the following critical parameters that must remain consistent:

• Circuit configuration: SPDT topology
• Electrical ratings: 0.4VA at 28V AC/DC
• Mounting interface: Panel mount with 1/4-40 bushing thread
• Panel cutout dimensions: Circular 6.50mm diameter
• Actuator specifications: Standard round type, 5.08mm length
• Termination: Solder lug connection
• Environmental rating: IP67 ingress protection
• Operating temperature range: -30°C to 85°C
• Regulatory compliance: ROHS3 compliant

The substitute part MN12S2D3G01 maintains compatibility within these defined parameters, enabling direct functional replacement in applications requiring SPDT toggle switch functionality at the specified electrical and mechanical interface requirements.

Parameter Comparison

Engineering Selection Recommendations

The M2012S2D3G01 is designated as obsolete, necessitating transition to active product alternatives. The MN12S2D3G01 is classified as an active product from the same manufacturer, NKK Switches, and shares the same ECCN and HTSUS classifications, indicating regulatory alignment.

Both parts maintain ROHS3 compliance, satisfying environmental and hazardous substance restrictions applicable to electronic component procurement. The substitute part's active status ensures ongoing availability and manufacturing support, addressing supply chain continuity concerns associated with obsolete component sourcing.

Selection of the MN12S2D3G01 as a substitute is supported by manufacturer designation and regulatory classification consistency. Detailed electrical and mechanical specifications for the substitute part should be cross-referenced with the original design requirements to confirm full parameter alignment prior to implementation.

Frequently Asked Questions (FAQ)

Q: What makes MN12S2D3G01 a suitable substitute for M2012S2D3G01?

A: Both parts are manufactured by NKK Switches and share identical ECCN and HTSUS classifications. The substitute is designated as an active product, addressing the obsolescence status of the original part. Confirmation of electrical ratings, mechanical dimensions, and circuit configuration compatibility is required through detailed datasheet comparison.

Q: Are there any packaging differences between the main part and substitute?

A: The main part M2012S2D3G01 is specified as bulk packaging. Packaging information for the substitute MN12S2D3G01 is not provided in the available data. Packaging requirements should be confirmed with the manufacturer or authorized distributor prior to procurement.

Q: What is the significance of the ROHS3 compliance status?

A: ROHS3 compliance indicates that both the main part and substitute meet Restriction of Hazardous Substances Directive requirements, restricting the use of specific hazardous materials in electrical and electronic equipment. This compliance status is mandatory for many applications and markets.

Q: How should I verify compatibility before implementing the substitute part?

A: Obtain complete datasheets for both M2012S2D3G01 and MN12S2D3G01 from NKK Switches. Cross-reference all electrical parameters (voltage, current, circuit configuration), mechanical dimensions (actuator length, panel cutout, bushing thread), termination style, and environmental ratings to confirm functional equivalence within your specific application requirements.

Q: What inventory considerations apply to these parts?

A: The main part M2012S2D3G01 shows 5,041 pieces in stock as new original inventory. The substitute MN12S2D3G01 shows 1,158 pieces in stock. Inventory levels may change; current availability should be confirmed with your component supplier.