M2012S2A2W30 Toggle Switch SPDT Equivalent & Substitute Parts

Part Overview

The M2012S2A2W30 is a through-hole, right-angle toggle switch manufactured by NKK Switches with SPDT (Single Pole Double Throw) circuit configuration. This part is rated for 6A AC at 125V and 4A DC at 30V, featuring epoxy sealed terminals and a standard round actuator. The product status is obsolete, making equivalent and substitute parts necessary for ongoing design support and procurement.

Key Parameters

Parameter	Value
Manufacturer Part Number	M2012S2A2W30
Manufacturer	NKK Switches
Circuit Configuration	SPDT
Switch Function	On-On
Current Rating (AC)	6A @ 125V
Current Rating (DC)	4A @ 30V
Mounting Type	Through Hole, Right Angle
Actuator Type	Standard Round
Actuator Length	6.86mm
Termination Style	PC Pin
Operating Temperature Range	-30°C to 85°C
Electrical Life	25,000 Cycles
RoHS Status	ROHS3 Compliant
Product Status	Obsolete

Substitute Part Grouping Explanation

Substitution eligibility is determined by the following critical parameters:

Circuit configuration (SPDT required)
Switch function (On-On required)
Mounting type (Through Hole, Right Angle required)
Actuator type and length (6.86mm standard round or anti-rotation)
Termination style (PC Pin required)
Operating temperature range (-30°C to 85°C minimum)
Current and voltage ratings (must meet or exceed application requirements)
Mechanical compatibility (bushing thread, panel cutout dimensions)

The M2012S2A2W30 has been superseded by the NKK Switches MN12S2A2W30 (manufacturer recommended equivalent). Additional substitutes from C&K's 7000 series provide functional equivalence with comparable electrical ratings and mechanical form factors, though with variations in actuator type, electrical life, and compliance certifications.

Parameter Comparison

Part Number	Manufacturer	Circuit	Current (AC)	Voltage (AC)	Current (DC)	Voltage (DC)	Actuator Type	Electrical Life	RoHS Status	Product Status
M2012S2A2W30	NKK Switches	SPDT	6A	125V	4A	30V	Standard Round	25,000	ROHS3	Obsolete
MN12S2A2W30	NKK Switches	SPDT	—	—	—	—	—	—	ROHS3	Active
7101MD9A2QE	C&K	SPDT	5A	120V	5A	28V	Standard Round	100,000	Non-compliant	Active
7101MD9A4GE	C&K	SPDT	5A	120V	5A	28V	Standard Round	100,000	ROHS3	Active
7101MD9A4QE	C&K	SPDT	5A	120V	5A	28V	Standard Round	100,000	ROHS3	Active
7101MD9AGE	C&K	SPDT	5A	120V	5A	28V	Standard Round	100,000	ROHS3	Active
7101MD9AQE	C&K	SPDT	5A	120V	5A	28V	Standard Round	100,000	ROHS3	Active
7101MD9ARE	C&K	SPDT	5A	120V	5A	28V	Standard Round	100,000	RoHS Compliant	Active
7101MD9ASE	C&K	SPDT	5A	120V	5A	28V	Standard Round	100,000	ROHS3	Active
7101MPD9A2QE	C&K	SPDT	5A	120V	5A	28V	Anti-Rotation	100,000	ROHS3	Active
7101MPD9AGE	C&K	SPDT	5A	120V	5A	28V	Anti-Rotation	100,000	ROHS3	Active

Engineering Selection Recommendations

Primary Recommendation: MN12S2A2W30

The MN12S2A2W30 from NKK Switches is the manufacturer-recommended equivalent. As an active product with ROHS3 compliance, it provides direct continuity from the obsolete M2012S2A2W30 and is the preferred choice for new designs and ongoing production support.

Secondary Recommendations: C&K 7000 Series

The C&K 7101MD and 7101MP series toggle switches provide functional equivalence with the following considerations:

All C&K substitutes maintain SPDT circuit configuration and On-On switch function
All feature identical mounting type (Through Hole, Right Angle) and actuator length (6.86mm)
All are active products with established supply chains
Current ratings are slightly lower (5A AC/DC vs. 6A AC/4A DC), suitable for applications within 5A AC and 5A DC limits
Voltage ratings are comparable (120V AC/28V DC vs. 125V AC/30V DC)
Electrical life is significantly higher (100,000 cycles vs. 25,000 cycles)
ROHS3 compliance is available across most variants (7101MD9A4GE, 7101MD9A4QE, 7101MD9AGE, 7101MD9AQE, 7101MD9ASE, 7101MPD9A2QE, 7101MPD9AGE)
7101MD9A2QE is RoHS non-compliant and should be avoided for new designs requiring RoHS certification
Anti-rotation actuator variants (7101MPD9A2QE, 7101MPD9AGE) provide additional mechanical stability if required

Packaging Considerations:

MN12S2A2W30: Bulk packaging
C&K 7101MD9AGE and 7101MD9AQE: Tray packaging
Remaining C&K variants: Bulk packaging

Frequently Asked Questions (FAQ)

Q: Can the M2012S2A2W30 be directly replaced with the MN12S2A2W30?

A: Yes. The MN12S2A2W30 is the manufacturer-recommended equivalent from NKK Switches and maintains the same mechanical and electrical interface. Both are ROHS3 compliant and feature identical mounting configurations.

Q: Are C&K 7000 series switches compatible with the M2012S2A2W30?

A: C&K 7000 series switches are mechanically and functionally compatible for applications operating within their electrical ratings. All share identical mounting type, actuator length, termination style, and SPDT circuit configuration. However, current ratings are lower (5A vs. 6A AC), so applications requiring the full 6A AC rating must use the NKK Switches equivalents.

Q: What is the difference between 7101MD and 7101MP series?

A: The primary difference is actuator type. The 7101MD series features a standard round actuator, while the 7101MP series features an anti-rotation actuator. Both maintain identical electrical ratings, mounting configuration, and operating temperature range. Selection depends on mechanical requirements for actuator stability.

Q: Why do some C&K parts show different RoHS statuses?

A: The 7101MD9A2QE is RoHS non-compliant, while most other variants are ROHS3 compliant. For new designs requiring RoHS certification, select only ROHS3 compliant variants: 7101MD9A4GE, 7101MD9A4QE, 7101MD9AGE, 7101MD9AQE, 7101MD9ASE, 7101MPD9A2QE, or 7101MPD9AGE.

Q: What is the impact of lower electrical life in the M2012S2A2W30 compared to C&K substitutes?

A: The M2012S2A2W30 is rated for 25,000 electrical cycles, while C&K 7000 series switches are rated for 100,000 cycles. For applications with high cycle counts or extended operational life requirements, C&K substitutes provide superior durability. For low-cycle applications, both are suitable.

Q: Does packaging type affect electrical performance?

A: No. Packaging type (Bulk vs. Tray) does not affect electrical performance or mechanical compatibility. Selection should be based on procurement and assembly requirements.

Q: Can I use a C&K switch rated for 5A in an application designed for 6A?

A: No. If your application requires the full 6A AC rating, you must use a switch rated for at least 6A AC. The NKK Switches MN12S2A2W30 or M2012S2A2W30 are appropriate. C&K 7000 series switches are suitable only for applications operating at 5A AC or below.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message