M2012LL2W13 Equivalent & Substitute Parts

Part Overview

The M2012LL2W13 is a toggle switch manufactured by NKK Switches with SPDT (Single Pole Double Throw) circuit configuration. This through-hole mounted component is rated for 6A at 125V AC and 4A at 30V DC, featuring a locking lever actuator with epoxy sealed terminals. The product is currently obsolete, making identification of compatible substitute parts essential for ongoing maintenance, repair, and legacy system support.

Substiute Parts

M2012LL2W13

NKK SwitchesIn Stock: 1132M2012LL2W13 Datasheet

Current PartRFQ

MN12LL2W13

NKK SwitchesIn Stock: 1081MN12LL2W13 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the M2012LL2W13 is determined by the following critical parameters:

• Circuit Configuration: SPDT topology must be maintained
• Switch Function: On-On operation required
• Current and Voltage Ratings: AC 6A at 125V and DC 4A at 30V minimum
• Mounting Type: Through-hole configuration for PCB compatibility
• Actuator Type and Length: Locking lever at 16.50mm for mechanical fit
• Termination Style: PC pin connections for board integration
• Operating Temperature Range: -30°C to 85°C capability
• Regulatory Compliance: ROHS3 and REACH status for environmental standards

The MN12LL2W13 qualifies as a manufacturer-recommended substitute based on these parameters.

Parameter Comparison

Engineering Selection Recommendations

The MN12LL2W13 is the manufacturer-recommended substitute for the obsolete M2012LL2W13. Both components are manufactured by NKK Switches and maintain identical regulatory compliance status under ROHS3 and EAR99 classifications. The MN12LL2W13 carries active product status, ensuring availability and ongoing manufacturer support. Selection of this substitute is appropriate for applications requiring direct replacement of the M2012LL2W13 in through-hole PCB assemblies.

Frequently Asked Questions (FAQ)

Q: Can the MN12LL2W13 directly replace the M2012LL2W13 in existing designs?

A: Yes. Both components share identical termination style (PC Pin), mounting type (Through Hole), and regulatory compliance certifications. The MN12LL2W13 is the manufacturer-designated substitute.

Q: What is the primary reason for substitution?

A: The M2012LL2W13 is obsolete. The MN12LL2W13 is an active product from the same manufacturer, providing continued availability and support.

Q: Are there differences in electrical performance between these parts?

A: The provided specifications confirm both components meet the same regulatory standards (ROHS3, EAR99) and share identical HTSUS classification, indicating functional equivalence for the intended application.

Q: What packaging options are available?

A: Both the M2012LL2W13 and MN12LL2W13 are supplied in bulk packaging.

Q: Are there any compliance concerns with substitution?

A: No. Both components maintain ROHS3 compliance and REACH unaffected status, ensuring regulatory compatibility in applications requiring these certifications.