M2012LL2G30 Equivalent & Substitute Parts

Part Overview

The M2012LL2G30 is a toggle switch manufactured by NKK Switches, configured as a Single Pole Double Throw (SPDT) switch with an on-on function. This through-hole, right-angle mounted component is rated for 0.4VA at 28V AC/DC with a locking lever actuator. The product is currently obsolete, making identification of compatible substitute parts essential for ongoing maintenance, repair, and legacy system support.

Substiute Parts

M2012LL2G30

NKK SwitchesIn Stock: 1000M2012LL2G30 Datasheet

Current PartRFQ

MN12LL2G30

NKK SwitchesIn Stock: 1177MN12LL2G30 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the M2012LL2G30 is determined by the following critical parameters:

• Circuit Configuration: SPDT topology must be maintained
• Switch Function: On-On operation required
• Electrical Ratings: 0.4VA at 28V AC/DC minimum
• Mounting Compatibility: Through-hole, right-angle orientation
• Actuator Specifications: Locking lever with 16.50mm length
• Termination: PC pin configuration
• Environmental Compliance: ROHS3 compliance and operating temperature range

The substitute part MN12LL2G30 from NKK Switches meets these critical parameters, enabling direct functional replacement in legacy applications.

Parameter Comparison

Engineering Selection Recommendations

The MN12LL2G30 is the manufacturer-recommended substitute for the obsolete M2012LL2G30. Both components are manufactured by NKK Switches and share identical ECCN and HTSUS classifications, confirming regulatory alignment. The substitute maintains ROHS3 compliance, meeting modern environmental standards.

Selection of MN12LL2G30 is supported by its active product status, ensuring ongoing availability and supply chain continuity for replacement applications. The transition from the M-series to the MN-series represents a standard product line evolution within NKK Switches' toggle switch portfolio.

Frequently Asked Questions (FAQ)

Q: Can MN12LL2G30 directly replace M2012LL2G30 in existing circuit designs?

A: Yes. Both components share the same SPDT circuit configuration, on-on switch function, and PC pin termination. The manufacturer designation of MN12LL2G30 as the recommended substitute confirms functional equivalence for the specified electrical and mechanical parameters.

Q: What is the primary reason for substitution?

A: The M2012LL2G30 is obsolete. The MN12LL2G30 is an active product from the same manufacturer, providing continued availability for maintenance and repair applications.

Q: Are there compliance differences between the two parts?

A: No. Both components are ROHS3 compliant and share identical ECCN (EAR99) and HTSUS (8536.50.9065) classifications, confirming regulatory equivalence.

Q: What parameters must remain consistent during substitution?

A: Circuit configuration (SPDT), switch function (on-on), mounting type (through-hole, right-angle), termination style (PC pin), and electrical ratings (0.4VA at 28V AC/DC) must be maintained for proper circuit operation.

Q: Is packaging information available for the substitute part?

A: Both the main part and substitute are supplied in bulk packaging. Specific packaging dimensions and quantities per unit are not provided in the available technical data.