M2011SD3W01-CC Equivalent & Substitute Parts

Part Overview

The M2011SD3W01-CC is a toggle switch manufactured by NKK Switches, classified as SPST (Single Pole Single Throw) with panel mount configuration. This component is rated for 6A at 125V AC and 4A at 30V DC, featuring a non-illuminated standard round actuator with red cap and solder lug termination. The product is currently obsolete, making identification of functionally equivalent alternatives essential for ongoing maintenance, repair, and system support applications.

Substiute Parts

M2011SD3W01-CC

NKK SwitchesIn Stock: 977M2011SD3W01-CC Datasheet

Current PartRFQ

MN11SD3W01-CC

NKK SwitchesIn Stock: 931MN11SD3W01-CC Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the M2011SD3W01-CC is determined by strict equivalence across the following critical parameters:

• Circuit configuration (SPST)
• Switch function (On-Off)
• Current and voltage ratings (6A/125V AC minimum; 4A/30V DC minimum)
• Mounting type (Panel Mount)
• Termination style (Solder Lug)
• Panel cutout dimensions (Circular - 6.50mm Dia)
• Ingress protection rating (IP67 or equivalent)
• Operating temperature range (-30°C to 85°C or broader)

The MN11SD3W01-CC meets these substitution criteria as a functionally equivalent alternative from the same manufacturer.

Parameter Comparison

Engineering Selection Recommendations

The MN11SD3W01-CC is the designated substitute for the obsolete M2011SD3W01-CC. Both components are manufactured by NKK Switches and maintain identical electrical specifications, mechanical interfaces, and environmental ratings. The substitute part carries Active product status, ensuring continued availability and supply chain support. Both components comply with ROHS3 requirements and carry identical ECCN classification (EAR99), confirming regulatory equivalence for procurement and deployment.

Frequently Asked Questions (FAQ)

Q: Can MN11SD3W01-CC directly replace M2011SD3W01-CC in existing applications?

A: Yes. Both parts share identical circuit configuration (SPST), current ratings (6A AC / 4A DC), voltage ratings (125V AC / 30V DC), mounting type (Panel Mount), termination style (Solder Lug), panel cutout dimensions (6.50mm circular), and ingress protection rating (IP67). Mechanical and electrical compatibility is confirmed.

Q: What is the primary difference between these two part numbers?

A: The M2011SD3W01-CC is obsolete, while the MN11SD3W01-CC maintains Active product status. The substitute ensures continued availability and supply chain support for equivalent functionality.

Q: Are there packaging differences between the main part and substitute?

A: The M2011SD3W01-CC is supplied with standard packaging, while the MN11SD3W01-CC is supplied in Bulk packaging. Both configurations contain identical components; packaging format does not affect electrical or mechanical performance.

Q: Do both parts meet the same regulatory and compliance standards?

A: Yes. Both the M2011SD3W01-CC and MN11SD3W01-CC are ROHS3 compliant, carry EAR99 ECCN classification, and are REACH Unaffected. Regulatory equivalence is confirmed for all jurisdictions.

Q: What operating conditions are supported by the substitute part?

A: The MN11SD3W01-CC operates across the temperature range of -30°C to 85°C, matching the environmental specifications of the original M2011SD3W01-CC. IP67 ingress protection ensures dust-tight and waterproof operation in specified applications.