M2011SD3W01-CB Equivalent & Substitute Parts

Part Overview

The M2011SD3W01-CB is a toggle switch manufactured by NKK Switches, classified as SPST (Single Pole Single Throw) with panel mount configuration. This component is rated for 6A at 125V AC and 4A at 30V DC, featuring a non-illuminated standard round actuator with white cap and solder lug termination. The product is currently obsolete, making identification of functionally equivalent alternatives essential for ongoing maintenance, repair, and system support applications.

Substiute Parts

M2011SD3W01-CB

NKK SwitchesIn Stock: 1120M2011SD3W01-CB Datasheet

Current PartRFQ

MN11SD3W01-CB

NKK SwitchesIn Stock: 1082MN11SD3W01-CB Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the M2011SD3W01-CB is determined by the following critical parameters:

• Circuit configuration (SPST)
• Current and voltage ratings (6A/125V AC minimum; 4A/30V DC minimum)
• Mounting type (Panel Mount)
• Termination style (Solder Lug)
• Panel cutout dimensions (Circular 6.50mm Dia)
• Ingress protection rating (IP67)
• Operating temperature range (-30°C to 85°C)
• Electrical life specification (25,000 Cycles)

The substitute part MN11SD3W01-CB is identified as a manufacturer-recommended equivalent. This part maintains the same electrical specifications, mounting configuration, and environmental ratings required for direct functional replacement.

Parameter Comparison

Engineering Selection Recommendations

The M2011SD3W01-CB is classified as obsolete. The MN11SD3W01-CB is designated as the manufacturer-recommended substitute and carries active product status, ensuring ongoing availability and support. Both parts share identical ECCN and HTSUS classifications, confirming regulatory equivalence. The substitute part is available in bulk packaging, supporting production and replacement requirements.

Selection of the MN11SD3W01-CB is appropriate for applications requiring direct functional replacement of the obsolete M2011SD3W01-CB, provided that the electrical specifications, mounting configuration, and environmental requirements of the original design are maintained.

Frequently Asked Questions (FAQ)

Q: Can the MN11SD3W01-CB directly replace the M2011SD3W01-CB in existing designs?

A: The MN11SD3W01-CB is the manufacturer-recommended substitute. Both parts are manufactured by NKK Switches and share the same ECCN and HTSUS classifications. Confirmation of electrical specifications and mechanical fit is required based on the application circuit and panel configuration.

Q: What is the difference in product status between these parts?

A: The M2011SD3W01-CB is obsolete, while the MN11SD3W01-CB is active. Active status indicates current manufacturing and availability through authorized distributors.

Q: Are there packaging differences between the main part and substitute?

A: The M2011SD3W01-CB is listed with standard packaging, while the MN11SD3W01-CB is supplied in bulk packaging. Bulk packaging is suitable for production environments and high-volume applications.

Q: Do both parts meet the same regulatory requirements?

A: Both parts share identical ECCN (EAR99) and HTSUS (8536.50.9065) classifications, confirming regulatory equivalence for export and trade purposes.

Q: What electrical specifications should be verified for substitution?

A: Verify that the substitute part meets or exceeds the original specifications: 6A at 125V AC, 4A at 30V DC, SPST circuit configuration, panel mount with solder lug termination, and IP67 ingress protection rating.