M10-8FK Equivalent & Substitute Parts

Part Overview

The M10-8FK is a 3M Scotchlok™ spade terminal connector designed for crimp termination of 10-12 AWG wire. This non-insulated, 8 stud terminal features a brazed seam construction with tin contact finish and copper ETP contact material. The component is actively manufactured and maintains full RoHS compliance. Equivalent and substitute parts are identified when identical functional requirements can be met through alternative manufacturers while maintaining critical electrical and mechanical parameters.

Substiute Parts

M10-8FK

3MIn Stock: 939M10-8FK Datasheet

Current PartRFQ

P10-8F-D

Panduit CorpIn Stock: 1933P10-8F-D Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

The P10-8F-D from Panduit Corp qualifies as a direct substitute based on the following critical parameters:

• Wire Gauge Match: Both parts accommodate 10-12 AWG wire
• Stud Size Match: Both feature 8 stud configuration
• Termination Method: Both use crimp termination
• Insulation Type: Both are non-insulated
• Contact Material: Both use copper base material with tin finish
• Mounting Configuration: Both are free hanging, in-line design
• Compliance Status: Both are RoHS compliant and REACH unaffected

Dimensional variations (width and length) fall within acceptable tolerances for this terminal category and do not affect functional interchangeability for the specified wire gauge and stud size.

Parameter Comparison

Engineering Selection Recommendations

Both M10-8FK and P10-8F-D are active production components with equivalent compliance certifications. Selection between these parts should be based on:

• Availability: P10-8F-D currently has higher inventory (1883 pcs vs. 847 pcs)
• Regulatory Compliance: Both meet RoHS and REACH requirements; P10-8F-D carries ROHS3 designation
• Supply Chain: Either part satisfies the functional requirements for 10-12 AWG crimp spade terminals with 8 stud configuration
• Dimensional Tolerance: Minor dimensional differences (0.010" width variance, 0.050" length variance) are within acceptable ranges for this terminal category

Frequently Asked Questions (FAQ)

Q: Can P10-8F-D replace M10-8FK in existing designs? A: Yes. Both parts meet identical wire gauge (10-12 AWG), stud size (8), termination method (crimp), and contact specifications (copper with tin finish). Dimensional variations are within acceptable tolerances for this terminal category.

Q: What are the key compatibility criteria for these spade terminals? A: Wire gauge, stud size, termination type, contact material, and contact finish are the primary criteria. Both parts match on all these parameters.

Q: Are there any compliance differences between these parts? A: Both are RoHS and REACH compliant. P10-8F-D carries ROHS3 designation while M10-8FK carries standard RoHS compliance. Both are classified as EAR99 for export control purposes.

Q: Does the serrated termination feature on P10-8F-D affect substitution? A: The serrated termination on P10-8F-D is an additional feature that enhances wire grip during crimping. This does not prevent substitution and may provide improved performance in certain applications.

Q: What packaging format is available for both parts? A: Both M10-8FK and P10-8F-D are supplied in bulk packaging, suitable for high-volume assembly operations.