LTS-367E 7-Segment LED Display - Equivalent & Substitute Parts

Part Overview

The LTS-367E is a single-character 7-segment LED display module manufactured by Lite-On Inc. This orange-red display operates at 2V forward voltage with a 20mA test current and is housed in a 10-DIP package. The component is classified as Active product status and maintains full RoHS3 compliance. Substitute parts are identified when equivalent electrical characteristics, mechanical dimensions, and packaging specifications align with the original component's functional requirements.

Substiute Parts

LTS-367E

Lite-On Inc.In Stock: 843LTS-367E Datasheet

Current PartRFQ

SC36-11EWA

KingbrightIn Stock: 2352SC36-11EWA Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

The SC36-11EWA from Kingbright qualifies as a substitute based on the following alignment of critical parameters:

• Display Type: Both are 7-segment single-character modules
• Common Pin Configuration: Both use Common Cathode architecture
• Voltage - Forward (Vf) Typical: Both operate at 2V
• Current - Test: Both require 20mA
• Package / Case: Both use 10-DIP (0.200", 5.08mm) packaging
• Digit/Alpha Size: Both feature 0.36" (9.14mm) character size
• Product Status: Both are Active
• RoHS Compliance: Both are ROHS3 Compliant

The primary difference is color specification: LTS-367E is Orange-Red (630nm peak wavelength), while SC36-11EWA is Red (627nm peak wavelength). This wavelength variance falls within the visible red spectrum and does not affect electrical interchangeability.

Parameter Comparison

Engineering Selection Recommendations

Both the LTS-367E and SC36-11EWA maintain Active product status and full ROHS3 compliance, qualifying them for equivalent use in applications requiring 7-segment LED display modules. The SC36-11EWA demonstrates marginally higher luminous intensity (2.1mcd versus 2mcd) and slightly elevated maximum power dissipation (75mW versus 60mW), which remain within acceptable operational parameters for standard display applications. Dimensional tolerances between the two units are minimal and do not impact PCB layout or mechanical assembly. Both components carry MSL Level 1 (Unlimited) moisture sensitivity classification, indicating identical handling and storage requirements.

Frequently Asked Questions (FAQ)

Q: Can SC36-11EWA replace LTS-367E in existing designs? A: Yes. Both components share identical electrical specifications (2V forward voltage, 20mA test current), common cathode configuration, 10-DIP packaging, and 0.36" character size. The primary distinction is color: LTS-367E is orange-red (630nm), while SC36-11EWA is red (627nm). This difference is visual only and does not affect circuit functionality.

Q: Are there dimensional compatibility concerns? A: Dimensional differences are negligible. LTS-367E measures 14.00mm x 7.40mm x 8.44mm; SC36-11EWA measures 14.00mm x 7.50mm x 8.50mm. These tolerances fall within standard PCB footprint allowances for 10-DIP packages and do not require design modifications.

Q: Do both parts require identical driver circuitry? A: Yes. Both components operate at 2V forward voltage with 20mA test current and use common cathode architecture. Existing driver circuits designed for LTS-367E function without modification when using SC36-11EWA.

Q: What is the significance of the wavelength difference? A: LTS-367E operates at 630nm (orange-red spectrum), while SC36-11EWA operates at 627nm (red spectrum). Both wavelengths fall within the visible red range. Selection between them depends on visual appearance requirements in the end application.

Q: Are storage and handling requirements identical? A: Yes. Both components carry MSL Level 1 (Unlimited) classification, indicating no moisture sensitivity restrictions. Storage and handling procedures are identical.