LTM-360 LED Standoff Equivalent & Substitute Parts

Part Overview

The LTM-360 is a T1/T1 3/4 LED standoff manufactured by Bivar Inc., designed for vertical mounting applications with a 0.360" (9.14mm) height. The component is constructed from crystalline polymer material in black color and is classified as Active product status with full ROHS3 compliance. LED standoffs serve as mechanical supports and alignment fixtures for light-emitting diodes in electronic assemblies, providing precise positioning and thermal management in circuit board layouts. Substitute parts become necessary when original inventory is unavailable, when supply chain optimization is required, or when alternative material compositions offer equivalent functional performance within specified mechanical and electrical tolerances.

Substiute Parts

LTM-360

Bivar Inc.In Stock: 1110LTM-360 Datasheet

Current PartRFQ

705820090

Würth ElektronikIn Stock: 4332705820090 Datasheet

Parametric EquivalentRFQ

705820095

Würth ElektronikIn Stock: 1660705820095 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution logic for the LTM-360 is determined by strict alignment of the following critical parameters:

Primary Compatibility Criteria:

• LED form factor (T1, T1 3/4) must match exactly
• Color specification (Black) must be identical
• Height tolerance must fall within acceptable mechanical mounting range (0.354" to 0.374" represents ±0.010" variation from nominal 0.360")
• RoHS3 compliance status must be maintained
• Packaging format (Bag) must be consistent

Material Substitution Logic: The LTM-360 uses crystalline polymer construction. Substitute parts may employ alternative polymer materials (such as nylon) provided that the mechanical dimensions, LED compatibility, and regulatory compliance remain unchanged. Material composition differences do not affect functional substitutability when dimensional and electrical parameters are preserved.

Regulatory Alignment: All substitute parts must maintain ROHS3 compliance status and equivalent ECCN/HTSUS classifications to ensure regulatory continuity in procurement and deployment.

Parameter Comparison

Engineering Selection Recommendations

705820090 (Würth Elektronik) - Lower Height Variant: This substitute part is dimensionally equivalent within mechanical tolerance, measuring 0.354" (9.00mm) compared to the LTM-360 nominal 0.360". The 0.006" (0.14mm) height reduction represents a minor dimensional variance suitable for applications where LED standoff height is not a critical constraint. Material composition differs (nylon versus crystalline polymer), but both materials provide equivalent structural support for T1/T1 3/4 LED form factors. Active product status and ROHS3 compliance ensure regulatory continuity. This variant is appropriate for general-purpose LED mounting applications.

705820095 (Würth Elektronik) - Higher Height Variant: This substitute part measures 0.374" (9.50mm), representing a 0.014" (0.36mm) height increase from the LTM-360 nominal dimension. This variant is suitable for applications requiring slightly elevated LED positioning or where additional standoff height accommodates circuit board layout constraints. Nylon material construction maintains structural integrity equivalent to crystalline polymer. Active product status and ROHS3 compliance are maintained. This variant is appropriate for applications where increased standoff height provides design flexibility.

Selection Basis: Both substitute parts maintain identical LED form factor compatibility (T1, T1 3/4), color specification (Black), regulatory compliance (ROHS3, EAR99, HTSUS 3926.90.9985), and packaging format (Bag). Height variations fall within acceptable mechanical tolerance ranges for standard LED mounting applications. Selection between variants depends on specific circuit board layout requirements and LED positioning specifications.

Frequently Asked Questions (FAQ)

Q: Can 705820090 or 705820095 be used as direct replacements for LTM-360? A: Yes, both parts are parametric equivalents. The 705820090 is 0.006" shorter; the 705820095 is 0.014" taller than the LTM-360 nominal height. Selection depends on whether your application requires the exact 0.360" dimension or can accommodate the height variance.

Q: What is the significance of the material difference between crystalline polymer and nylon? A: Both materials provide equivalent mechanical support for T1/T1 3/4 LED form factors. Material composition does not affect functional substitutability when dimensional and electrical parameters remain constant. Nylon construction in the Würth Elektronik parts maintains structural integrity and thermal properties suitable for LED standoff applications.

Q: Are all three parts RoHS3 compliant? A: Yes. The LTM-360, 705820090, and 705820095 all carry ROHS3 Compliant status, ensuring regulatory continuity in procurement and deployment across all three options.

Q: Do the substitute parts have the same moisture sensitivity requirements? A: The LTM-360 specifies Moisture Sensitivity Level 1 (Unlimited). The Würth Elektronik parts (705820090 and 705820095) list MSL as Not Applicable, indicating nylon material does not require moisture-controlled storage. This represents an advantage in supply chain handling and storage conditions.

Q: What is the height tolerance range for these LED standoffs? A: The three parts span 0.354" to 0.374", representing a 0.020" (0.51mm) total range. The LTM-360 at 0.360" falls within the center of this range. Height selection should align with specific circuit board layout and LED positioning requirements.

Q: Are packaging and regulatory classifications identical across all three parts? A: Yes. All three parts use Bag packaging, carry EAR99 ECCN classification, and share HTSUS code 3926.90.9985, ensuring consistent procurement, logistics, and regulatory handling.

Q: Which substitute part should I select if height is not a critical constraint? A: Either 705820090 or 705820095 is suitable. The 705820090 offers lower inventory cost with 4259 units in stock. The 705820095 provides additional height with 1578 units available. Selection depends on application-specific requirements and inventory availability.