LTM-210 Equivalent & Substitute Parts

Part Overview

The LTM-210 is a T1, T1 3/4 LED standoff manufactured by Bivar Inc., constructed from black crystalline polymer with a 0.210" (5.33mm) length. The part is active in production status and fully compliant with ROHS3 standards. Equivalent and substitute parts may be required due to inventory availability, procurement lead times, or specific application requirements where alternative material specifications or dimensional tolerances are acceptable within engineering parameters.

Substiute Parts

LTM-210

Bivar Inc.In Stock: 798LTM-210 Datasheet

Current PartRFQ

SLM-200

Bivar Inc.In Stock: 798SLM-200 Datasheet

Parametric EquivalentRFQ

705820055

Würth ElektronikIn Stock: 1606705820055 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the LTM-210 is determined by the following parameters: LED type (T1, T1 3/4), color (black), and physical dimensions within acceptable tolerance ranges. The key parameters allowing substitution are:

• LED Type: All substitute parts must support T1 and T1 3/4 LED packages
• Color: All parts must be black
• Length: Acceptable range based on mechanical fit requirements (0.200" to 0.216" represents the parametric range of available equivalents)
• Material: Either crystalline polymer or nylon is acceptable for functional equivalence
• RoHS Compliance: All parts must maintain ROHS3 compliance
• Moisture Sensitivity: MSL 1 or non-applicable ratings are functionally equivalent

The identified substitute parts (SLM-200 and 705820055) meet these criteria and are classified as parametric equivalents.

Parameter Comparison

Engineering Selection Recommendations

All three parts—LTM-210, SLM-200, and 705820055—are active in production and fully compliant with ROHS3 standards, making them suitable for selection based on engineering requirements. The choice between Bivar Inc. (LTM-210 and SLM-200) and Würth Elektronik (705820055) may depend on supply chain considerations and established vendor relationships. Material differences (crystalline polymer versus nylon) and minor dimensional variations (0.200" to 0.216") are within the parametric equivalence range for T1, T1 3/4 LED standoff applications.

Frequently Asked Questions (FAQ)

Q: What is the primary difference between the LTM-210 and its substitutes? A: The primary differences are material composition (crystalline polymer versus nylon) and length tolerance. The LTM-210 uses crystalline polymer at 0.210" length, while SLM-200 uses nylon at 0.200" length, and 705820055 uses nylon at 0.216" length. All support identical LED types and are ROHS3 compliant.

Q: Can the SLM-200 be used as a direct replacement for the LTM-210? A: Yes, the SLM-200 is a parametric equivalent. Both are manufactured by Bivar Inc., support T1 and T1 3/4 LED types, are black, and comply with ROHS3. The length difference of 0.010" may be acceptable depending on mechanical fit requirements in your specific application.

Q: Is the 705820055 from Würth Elektronik compatible with the LTM-210 application? A: The 705820055 is a parametric equivalent manufactured by Würth Elektronik with identical LED type support, color, and ROHS3 compliance. The length of 0.216" is within the equivalent range. Compatibility depends on your mechanical fit tolerance specifications.

Q: What are the compliance requirements for these parts? A: All three parts are ROHS3 compliant and EAR99 classified. The LTM-210 and SLM-200 have MSL 1 (Unlimited moisture sensitivity), while the 705820055 has MSL Not Applicable, both meeting storage and handling requirements.

Q: Does material type affect substitution eligibility? A: Material differences between crystalline polymer and nylon do not prevent substitution if mechanical strength and environmental resistance requirements are met. Both materials are black and support the same LED types. Material selection should be based on specific application requirements for thermal, chemical, or mechanical properties.