LTC6908HS6-2#WTRMPBF Equivalent & Substitute Parts

Part Overview

The LTC6908HS6-2#WTRMPBF is an active silicon oscillator manufactured by Analog Devices Inc., classified within the Clock/Timing component category. This device functions as a programmable oscillator with dual outputs and spread spectrum modulation capability, operating across a frequency range of 50kHz to 10MHz. The part is currently in active product status and is supplied in Tape & Reel (TR) packaging with TSOT-23-6 surface mount configuration. Equivalent substitute parts are necessary when specific packaging formats, inventory availability, or procurement requirements differ from the primary part number while maintaining identical electrical and mechanical performance characteristics.

Substiute Parts

LTC6908HS6-2#WTRMPBF

Analog Devices Inc.In Stock: 1284LTC6908HS6-2#WTRMPBF Datasheet

Current PartRFQ

LTC6908HS6-1#TRMPBF

Analog Devices Inc.In Stock: 1656LTC6908HS6-1#TRMPBF Datasheet

Parametric EquivalentRFQ

LTC6908HS6-1#TRPBF

Analog Devices Inc.In Stock: 2830LTC6908HS6-1#TRPBF Datasheet

Parametric EquivalentRFQ

LTC6908HS6-1#WTRMPBF

Analog Devices Inc.In Stock: 1944LTC6908HS6-1#WTRMPBF Datasheet

Parametric EquivalentRFQ

LTC6908HS6-2#TRMPBF

Analog Devices Inc.In Stock: 2464LTC6908HS6-2#TRMPBF Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the LTC6908HS6-2#WTRMPBF is determined by strict equivalence across all critical electrical and mechanical parameters. The following parameters establish substitution validity:

Electrical Parameters (Must Match):

• Frequency Range: 50kHz ~ 10MHz
• Supply Voltage: 2.7V ~ 5.5V
• Supply Current: 1.25 mA
• Operating Temperature: -40°C ~ 125°C

Mechanical Parameters (Must Match):

• Package / Case: SOT-23-6 Thin, TSOT-23-6
• Mounting Type: Surface Mount
• Supplier Device Package: TSOT-23-6

Compliance Parameters (Must Match):

• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)
• REACH Status: REACH Unaffected

Variable Parameters (Allowed to Differ):

• Packaging Format: Tape & Reel (TR), Cut Tape (CT) & Digi-Reel®
• Manufacturer Part Number suffix designations

All substitute parts listed maintain identical electrical performance and physical form factor, with variations only in packaging and distribution format.

Parameter Comparison

Engineering Selection Recommendations

All listed substitute parts are manufactured by Analog Devices Inc. and maintain active product status, ensuring continued availability and technical support. Each substitute part carries identical ROHS3 compliance certification and REACH unaffected status, meeting regulatory requirements for industrial and commercial applications.

Selection between the primary part number LTC6908HS6-2#WTRMPBF and its substitutes should be based on packaging and distribution requirements:

Tape & Reel (TR) Packaging Options:

• LTC6908HS6-2#WTRMPBF (primary specification)
• LTC6908HS6-1#TRPBF
• LTC6908HS6-2#TRMPBF

Cut Tape (CT) & Digi-Reel® Packaging Options:

• LTC6908HS6-1#TRMPBF
• LTC6908HS6-1#WTRMPBF

All parts deliver identical electrical performance across the specified frequency range, supply voltage, current consumption, and operating temperature range. Moisture sensitivity level 1 designation indicates unlimited shelf life under standard storage conditions for all variants.

Frequently Asked Questions (FAQ)

Q: Can LTC6908HS6-1#TRPBF be used as a direct replacement for LTC6908HS6-2#WTRMPBF?

A: Yes. Both parts are parametrically equivalent silicon oscillators with identical electrical specifications (50kHz ~ 10MHz frequency range, 2.7V ~ 5.5V supply voltage, 1.25 mA supply current, -40°C ~ 125°C operating temperature) and identical TSOT-23-6 package configuration. The difference is packaging format: LTC6908HS6-1#TRPBF is supplied in Tape & Reel format, while LTC6908HS6-2#WTRMPBF is also Tape & Reel. Both are functionally interchangeable at the circuit level.

Q: What is the difference between Tape & Reel (TR) and Cut Tape (CT) & Digi-Reel® packaging?

A: Tape & Reel (TR) packaging supplies components on continuous carrier tape wound on reels, suitable for high-volume automated assembly. Cut Tape (CT) & Digi-Reel® packaging provides components on cut tape segments or alternative reel formats, typically for lower-volume applications or mixed-component orders. Electrical and mechanical performance is identical; packaging format affects only procurement and handling logistics.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All listed substitute parts carry ROHS3 compliance certification and REACH unaffected status, meeting environmental and regulatory requirements for use in industrial, commercial, and consumer applications.

Q: What is the significance of the part number suffix designations (1 vs. 2, TRMPBF vs. WTRMPBF)?

A: Suffix designations indicate internal configuration or manufacturing date code variations within the LTC6908 base product family. All variants listed maintain identical electrical performance and package specifications. The suffixes do not affect functional equivalence or substitutability.

Q: Can these oscillators be used interchangeably in applications requiring specific frequency programming?

A: Yes. All substitute parts support the same frequency programming range of 50kHz ~ 10MHz and operate under identical supply voltage (2.7V ~ 5.5V) and current (1.25 mA) conditions. Frequency programming methodology and output characteristics remain consistent across all variants.

Q: What is the Moisture Sensitivity Level (MSL) 1 rating?

A: MSL 1 indicates unlimited shelf life under standard storage conditions (typically 30°C / 85% relative humidity). Components with this rating do not require special moisture control during storage or handling, simplifying inventory management and reducing procurement complexity.