LT6207IGN#PBF Equivalent & Substitute Parts

Part Overview

The LT6207IGN#PBF is a quad voltage feedback amplifier manufactured by Analog Devices Inc., housed in a 16-SSOP surface mount package. This device is classified as a video amplifier with four independent voltage feedback circuits, designed for applications requiring high slew rate performance and rail-to-rail output capability. The LT6207IGN#PBF is currently designated as Last Time Buy, indicating that this part number will no longer be manufactured after existing inventory is depleted. Identifying qualified substitute components is essential for design continuity and long-term product support.

Substiute Parts

LT6207IGN#PBF

Analog Devices Inc.In Stock: 1545LT6207IGN#PBF Datasheet

Current PartRFQ

LT1814IGN#PBF

Analog Devices Inc.In Stock: 1345LT1814IGN#PBF Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the LT6207IGN#PBF is determined by strict alignment of the following critical parameters:

Package Compatibility: The substitute must utilize the identical 16-SSOP surface mount package to ensure direct PCB layout compatibility without redesign.

Circuit Configuration: The substitute must provide four independent amplifier circuits to maintain functional equivalence in multi-channel applications.

Amplifier Architecture: The substitute must employ voltage feedback topology to preserve circuit behavior and stability characteristics.

Electrical Performance Envelope: The substitute must operate within the specified supply voltage range (2.7V ~ 12.6V single supply, ±1.35V ~ 6.3V dual supply) and deliver the required output current per channel (60 mA minimum).

Compliance Standards: The substitute must maintain ROHS3 compliance, MSL Level 1 rating, and REACH Unaffected status to satisfy regulatory and environmental requirements.

The LT1814IGN#PBF meets all substitution criteria and is classified as an MFR Recommended substitute by Analog Devices Inc.

Parameter Comparison

Engineering Selection Recommendations

The LT1814IGN#PBF is the qualified substitute for the LT6207IGN#PBF based on the following engineering criteria:

Product Status Alignment: The LT1814IGN#PBF maintains Active product status, ensuring continued availability and manufacturer support. This addresses the Last Time Buy status of the LT6207IGN#PBF and provides long-term design security.

Regulatory Compliance: Both devices maintain identical ROHS3 compliance, MSL Level 1 rating, and REACH Unaffected status, satisfying all environmental and regulatory requirements without modification to procurement or handling procedures.

Package and Pinout Compatibility: Both devices utilize the 16-SSOP surface mount package with identical physical dimensions (0.154", 3.90mm width), enabling direct PCB layout compatibility and eliminating redesign requirements.

Electrical Performance: The LT1814IGN#PBF delivers enhanced slew rate performance (750V/µs versus 600V/µs) and reduced supply current (3 mA versus 4 mA per channel), providing improved dynamic response and lower power consumption. Output current per channel remains equivalent at 60 mA. Supply voltage operating range is compatible, with the LT1814IGN#PBF supporting operation down to 2.5V minimum supply.

Functional Equivalence: Both devices provide four independent voltage feedback amplifier circuits with identical output current capability, maintaining functional equivalence in multi-channel applications.

Frequently Asked Questions (FAQ)

Q: Can the LT1814IGN#PBF be used as a direct replacement for the LT6207IGN#PBF without PCB modifications?

A: Yes. Both devices utilize the identical 16-SSOP surface mount package with matching pinout and physical dimensions. Direct PCB layout compatibility is maintained without redesign.

Q: What are the key differences between the LT6207IGN#PBF and LT1814IGN#PBF?

A: The LT1814IGN#PBF provides higher slew rate performance (750V/µs versus 600V/µs), lower supply current consumption (3 mA versus 4 mA per channel), and maintains Active product status. Output current per channel and supply voltage operating ranges are equivalent.

Q: Why is the LT6207IGN#PBF designated as Last Time Buy?

A: Last Time Buy designation indicates that the manufacturer will discontinue production of this part number. Existing inventory will be depleted, and no future manufacturing runs are planned. Transition to the LT1814IGN#PBF is recommended for design continuity.

Q: Are there any compliance or certification differences between these devices?

A: No. Both devices maintain identical ROHS3 compliance, MSL Level 1 rating, and REACH Unaffected status. Procurement and handling procedures remain unchanged.

Q: What is the minimum supply voltage for each device?

A: The LT6207IGN#PBF operates at a minimum of 2.7V single supply. The LT1814IGN#PBF operates at a minimum of 2.5V single supply, providing slightly lower voltage operation capability.

Q: Are the output current specifications identical?

A: Yes. Both devices deliver 60 mA output current per channel, maintaining equivalent drive capability for load applications.

Q: Does the LT1814IGN#PBF provide rail-to-rail output?

A: The LT1814IGN#PBF output type specification is not provided in the available technical data. Detailed output swing characteristics should be confirmed against the device datasheet for applications requiring full rail-to-rail performance.