LT6200CS8#PBF Equivalent & Substitute Parts

Part Overview

The LT6200CS8#PBF is a general-purpose operational amplifier manufactured by Analog Devices Inc., designed for rail-to-rail output applications in 8-SO surface mount packaging. This active linear amplifier device is classified as a single-circuit general-purpose amplifier with a current product status. Substitute parts are identified when equivalent electrical performance parameters and identical physical packaging specifications are available from alternative manufacturers, enabling design flexibility and supply chain optimization.

Substiute Parts

LT6200CS8#PBF

Analog Devices Inc.In Stock: 1251LT6200CS8#PBF Datasheet

Current PartRFQ

THS4504D

Texas InstrumentsIn Stock: 1315THS4504D Datasheet

SimilarRFQ

THS4505DR

Texas InstrumentsIn Stock: 7158THS4505DR Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the LT6200CS8#PBF are identified based on the following critical parameters that determine functional and physical compatibility:

Physical Compatibility Criteria:

• Identical package type: 8-SOIC (0.154", 3.90mm Width)
• Surface mount mounting type
• Single circuit configuration

Electrical Performance Criteria:

• Gain bandwidth product within operational range
• Supply voltage span compatibility
• Input bias current and offset voltage specifications
• Slew rate performance characteristics
• Operating temperature range coverage

The substitute parts THS4504D and THS4505DR are Texas Instruments differential amplifiers that share identical physical packaging specifications with the LT6200CS8#PBF. Both substitute parts maintain the 8-SOIC package footprint, enabling direct physical placement compatibility on printed circuit boards designed for the original part.

Parameter Comparison

Engineering Selection Recommendations

Product Status Compliance: All three parts—LT6200CS8#PBF, THS4504D, and THS4505DR—maintain active product status with current manufacturer support and availability.

Regulatory Compliance: All parts are ROHS3 compliant and REACH unaffected, meeting current environmental and regulatory requirements for electronic component manufacturing and distribution.

Moisture Sensitivity: All parts are classified as MSL 1 (Unlimited), indicating no moisture sensitivity restrictions during storage, handling, or assembly processes.

Physical Compatibility: The THS4504D and THS4505DR share identical 8-SOIC package dimensions (0.154", 3.90mm Width) with the LT6200CS8#PBF, enabling direct footprint compatibility on existing printed circuit board designs.

Packaging Availability: THS4504D is available in tube packaging, matching the original part's packaging format. THS4505DR is available in tape and reel packaging, suitable for high-volume automated assembly operations.

Frequently Asked Questions (FAQ)

Q: Can THS4504D and THS4505DR be used as direct physical replacements for LT6200CS8#PBF?

A: Both THS4504D and THS4505DR share identical 8-SOIC package dimensions with the LT6200CS8#PBF, enabling direct physical placement on printed circuit boards designed for the original part. However, functional differences exist between general-purpose and differential amplifier architectures that must be evaluated for specific circuit applications.

Q: What is the difference between THS4504D and THS4505DR?

A: THS4504D and THS4505DR are electrically identical differential amplifiers from Texas Instruments. The primary difference is packaging format: THS4504D is supplied in tube packaging, while THS4505DR is supplied in tape and reel format. Selection depends on assembly process requirements and volume production needs.

Q: Are the electrical performance characteristics of the substitute parts compatible with the LT6200CS8#PBF?

A: The substitute parts exhibit higher slew rate (1800 V/µs versus 50 V/µs), higher gain bandwidth product (210 MHz versus 165 MHz), lower input bias current (4 µA versus 23 µA), and extended operating temperature range (-40°C to 85°C versus 0°C to 70°C). These differences must be evaluated against specific circuit requirements.

Q: What supply voltage considerations apply when selecting between these parts?

A: The LT6200CS8#PBF operates with a minimum supply voltage of 2.5 V, while both THS4504D and THS4505DR require a minimum of 4.5 V. Circuit designs operating below 4.5 V cannot use the Texas Instruments substitute parts. Maximum supply voltage is 12.6 V for the LT6200CS8#PBF and 15 V for both substitute parts.

Q: Do all three parts meet current environmental and regulatory standards?

A: All three parts are ROHS3 compliant, REACH unaffected, and classified as MSL 1 (Unlimited) for moisture sensitivity. All parts maintain active product status with current manufacturer support.

Q: What packaging considerations apply to high-volume production?

A: THS4505DR in tape and reel format is optimized for automated pick-and-place assembly operations typical of high-volume manufacturing. THS4504D in tube packaging is suitable for lower-volume or manual assembly processes. The LT6200CS8#PBF is supplied in tube packaging.