LT6013CS8#TRPBF Equivalent & Substitute Parts

Part Overview

The LT6013CS8#TRPBF is a general-purpose operational amplifier manufactured by Analog Devices Inc., configured as a single-circuit rail-to-rail output device in an 8-SOIC surface-mount package. This component is classified as a linear amplifier and is currently in active product status with 684 units in stock. The LT6013CS8#TRPBF is supplied in Tape & Reel (TR) packaging format.

Substitute parts are identified when equivalent electrical performance parameters and mechanical compatibility exist within the same package footprint and mounting technology. Substitution becomes necessary when the primary part reaches end-of-life status, inventory constraints occur, or alternative sourcing is required for supply chain continuity.

Key Parameters

Parameter	Value	Unit
Amplifier Type	General Purpose	—
Number of Circuits	1	—
Output Type	Rail-to-Rail	—
Package / Case	8-SOIC (0.154", 3.90mm Width)	—
Mounting Type	Surface Mount	—
Voltage - Supply Span (Min)	2.7	V
Voltage - Supply Span (Max)	36	V
Operating Temperature	0 to 70	°C
RoHS Status	ROHS3 Compliant	—
Moisture Sensitivity Level (MSL)	1 (Unlimited)	—

Substitute Part Grouping Explanation

Substitution eligibility is determined by the following criteria:

Mandatory Compatibility Parameters:

Package / Case: 8-SOIC (0.154", 3.90mm Width)
Mounting Type: Surface Mount
Amplifier Type: General Purpose
Number of Circuits: 1
Output Type: Rail-to-Rail
Voltage - Supply Span (Min): 2.7 V or lower
Voltage - Supply Span (Max): 36 V or higher

Performance Parameters Evaluated:

Slew Rate (V/µs)
Gain Bandwidth Product (MHz)
Current - Input Bias (pA)
Voltage - Input Offset (µV)
Current - Supply (µA)
Current - Output / Channel (mA)

All substitute parts listed meet the mandatory compatibility parameters. Performance variations exist across the substitute group, reflecting different design objectives within the general-purpose amplifier category. Parts are grouped by base product number to indicate design family relationships.

Parameter Comparison

Parameter	LT6013CS8#TRPBF	OPA170AID	OPA170AIDR	OPA171AID	OPA171AIDR	OPA172ID	OPA172IDR	OPA196ID	OPA211ID	OPA211IDR	TLV07IDR
Manufacturer	Analog Devices	Texas Instruments	Texas Instruments	Texas Instruments	Texas Instruments	Texas Instruments	Texas Instruments	Texas Instruments	Texas Instruments	Texas Instruments	Texas Instruments
Package / Case	8-SOIC	8-SOIC	8-SOIC	8-SOIC	8-SOIC	8-SOIC	8-SOIC	8-SOIC	8-SOIC	8-SOIC	8-SOIC
Mounting Type	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount
Amplifier Type	General Purpose	General Purpose	General Purpose	General Purpose	General Purpose	General Purpose	General Purpose	General Purpose	General Purpose	General Purpose	General Purpose
Number of Circuits	1	1	1	1	1	1	1	1	1	1	1
Output Type	Rail-to-Rail	Rail-to-Rail	Rail-to-Rail	Rail-to-Rail	Rail-to-Rail	Rail-to-Rail	Rail-to-Rail	Rail-to-Rail	Rail-to-Rail	Rail-to-Rail	Rail-to-Rail
Voltage - Supply Span (Min)	2.7 V	2.7 V	2.7 V	2.7 V	2.7 V	4.5 V	4.5 V	4.5 V	4.5 V	4.5 V	2.7 V
Voltage - Supply Span (Max)	36 V	36 V	36 V	36 V	36 V	36 V	36 V	36 V	36 V	36 V	36 V
Slew Rate (V/µs)	0.2	0.4	0.4	1.5	1.5	10	10	7	27	27	0.4
Gain Bandwidth Product (MHz)	1.4	1.2	1.2	3	3	10	10	2.5	80	80	1
Current - Input Bias (pA)	100	8	8	8	8	8	8	20	60 nA	60 nA	40
Voltage - Input Offset (µV)	25	250	250	250	250	200	200	100	30	30	50
Current - Supply (µA)	200	110	110	475	475	1600	1600	140	3600	3600	930
Current - Output / Channel (mA)	20	17	17	35	35	—	—	—	30	30	—
Operating Temperature	0 to 70°C	-40 to 125°C	-40 to 125°C	-40 to 125°C	-40 to 125°C	-40 to 125°C	-40 to 125°C	-40 to 125°C	-40 to 125°C	-40 to 125°C	-40 to 125°C
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)	2 (1 Year)	2 (1 Year)	2 (1 Year)	2 (1 Year)	2 (1 Year)	2 (1 Year)	2 (1 Year)	2 (1 Year)	2 (1 Year)	2 (1 Year)

Engineering Selection Recommendations

All listed substitute parts are active products with ROHS3 compliance and REACH unaffected status, matching the regulatory posture of the LT6013CS8#TRPBF. All parts are housed in the 8-SOIC package with identical footprint dimensions (0.154", 3.90mm Width) and surface-mount mounting technology, enabling direct PCB layout compatibility.

Packaging Format Considerations:

The LT6013CS8#TRPBF is supplied in Tape & Reel (TR) format. Substitute parts are available in multiple packaging formats:

OPA170AIDR and OPA171AIDR: Cut Tape (CT) & Digi-Reel® format
OPA172IDR and OPA211IDR: Cut Tape (CT) & Digi-Reel® format
TLV07IDR: Cut Tape (CT) & Digi-Reel® format
OPA170AID, OPA171AID, OPA172ID, OPA196ID, OPA211ID: Bulk or Tube format

Packaging format selection depends on assembly process requirements and volume specifications.

Performance Tier Selection:

Substitute parts span three performance tiers within the general-purpose amplifier category:

Low-Speed Tier (Slew Rate ≤ 0.4 V/µs, GBW ≤ 1.2 MHz): OPA170AID, OPA170AIDR, TLV07IDR. These parts provide performance comparable to the LT6013CS8#TRPBF with lower slew rates and bandwidth.
Mid-Speed Tier (Slew Rate 1.5 to 7 V/µs, GBW 2.5 to 3 MHz): OPA171AID, OPA171AIDR, OPA196ID. These parts offer enhanced speed performance suitable for applications requiring faster transient response.
High-Speed Tier (Slew Rate 27 V/µs, GBW 80 MHz): OPA211ID, OPA211IDR. These parts provide maximum speed performance for bandwidth-critical applications.

Supply Voltage Compatibility:

OPA172ID, OPA172IDR, OPA196ID, OPA211ID, and OPA211IDR require minimum supply voltage of 4.5 V. Applications operating at 2.7 V minimum supply must use OPA170AID, OPA170AIDR, OPA171AID, OPA171AIDR, or TLV07IDR.

Moisture Sensitivity:

The LT6013CS8#TRPBF carries MSL 1 (Unlimited) rating. All substitute parts carry MSL 2 (1 Year) rating, requiring controlled storage and handling within one year of manufacture date.

Frequently Asked Questions (FAQ)

Q: Can OPA172IDR be used as a direct replacement for LT6013CS8#TRPBF in a 2.7 V supply application?

A: No. OPA172IDR requires minimum supply voltage of 4.5 V and is not suitable for 2.7 V operation. Use OPA170AIDR, OPA171AIDR, or TLV07IDR for 2.7 V minimum supply applications.

Q: Are all substitute parts pin-compatible with the LT6013CS8#TRPBF?

A: All substitute parts use the 8-SOIC package with identical pin count and footprint dimensions (0.154", 3.90mm Width). Pin-level functional compatibility must be verified against specific application schematic requirements, as internal circuit architecture differs between manufacturers.

Q: What is the difference between OPA170AID and OPA170AIDR?

A: Both parts are identical in electrical specifications and performance. The difference is packaging format: OPA170AID is supplied in Bulk format, while OPA170AIDR is supplied in Cut Tape (CT) & Digi-Reel® format. Selection depends on assembly process requirements.

Q: Why do substitute parts have wider operating temperature ranges than the LT6013CS8#TRPBF?

A: The LT6013CS8#TRPBF operates from 0°C to 70°C, while all substitute parts operate from -40°C to 125°C. The wider temperature range of substitute parts does not affect compatibility in applications operating within the 0°C to 70°C range. Applications requiring operation below 0°C or above 70°C must use substitute parts with extended temperature ratings.

Q: What does MSL 2 (1 Year) mean for substitute parts?

A: Moisture Sensitivity Level 2 (1 Year) indicates that parts must be used within one year of manufacture date. Parts must be stored in controlled humidity environments (typically ≤30% relative humidity at 25°C) and handled according to IPC-A-610 standards. The LT6013CS8#TRPBF carries MSL 1 (Unlimited), allowing indefinite storage without moisture control.

Q: Which substitute part most closely matches the LT6013CS8#TRPBF performance profile?

A: OPA170AIDR and OPA170AID provide the closest performance match, with slew rate of 0.4 V/µs and gain bandwidth product of 1.2 MHz, compared to the LT6013CS8#TRPBF specifications of 0.2 V/µs and 1.4 MHz respectively. Both parts maintain 2.7 V minimum supply voltage compatibility.

Q: Can OPA211ID be used in applications where the LT6013CS8#TRPBF is specified?

A: OPA211ID is functionally compatible from a package and supply voltage perspective but operates at significantly higher speed (27 V/µs slew rate, 80 MHz bandwidth) and higher supply current (3.6 mA). Use OPA211ID only when application requirements specifically demand high-speed performance. Substitution in low-speed applications may introduce noise and stability issues.

Q: What is the inventory status of substitute parts?

A: OPA171AIDR has the highest inventory (35,400 units), followed by OPA171AID (34,200 units) and OPA172IDR (15,380 units). OPA211IDR has the lowest inventory (1,252 units). Inventory levels should be verified at time of procurement.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message