Request Quote
(Ships tomorrow)
LT1881CS8#TRPBF Equivalent & Substitute Parts
Part Overview
The LT1881CS8#TRPBF is a general purpose operational amplifier manufactured by Analog Devices Inc., configured as a dual-channel (2 circuit) rail-to-rail output device in an 8-SOIC surface mount package. This component is classified as a linear amplifier and maintains active product status with full RoHS3 compliance. The LT1881 series is designed for applications requiring low-power, general-purpose amplification across a wide supply voltage range of 2.7 V to 36 V.
Substitute parts are identified when equivalent electrical performance parameters and mechanical compatibility are maintained within the specified operating envelope. Alternative components may be selected based on packaging availability, supply chain considerations, or when specific performance enhancements are required for particular application requirements.
Substiute Parts
Key Parameters
| Parameter | Value | Unit |
|---|---|---|
| Amplifier Type | General Purpose | — |
| Number of Circuits | 2 | — |
| Output Type | Rail-to-Rail | — |
| Package / Case | 8-SOIC (0.154", 3.90mm Width) | — |
| Mounting Type | Surface Mount | — |
| Voltage - Supply Span (Min) | 2.7 | V |
| Voltage - Supply Span (Max) | 36 | V |
| Slew Rate | 0.4 | V/µs |
| Gain Bandwidth Product | 850 | kHz |
| Current - Input Bias | 150 | pA |
| Voltage - Input Offset | 30 | µV |
| Current - Supply | 850 | µA (x2 Channels) |
| Current - Output / Channel | 40 | mA |
| Operating Temperature | 0 to 70 | °C |
| RoHS Status | ROHS3 Compliant | — |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) | — |
Substitute Part Grouping Explanation
Substitute parts for the LT1881CS8#TRPBF are identified based on the following critical parameters that define functional equivalence:
Primary Compatibility Criteria:
- Dual-channel (2 circuit) configuration
- Rail-to-rail output capability
- 8-SOIC surface mount package with 0.154" (3.90mm) width
- Supply voltage range compatibility: minimum 2.7 V to maximum 36 V
- Surface mount technology for PCB integration
Secondary Performance Parameters:
- Slew rate, gain bandwidth product, and input bias current determine application suitability
- Voltage input offset and output current capability affect signal fidelity and load driving capacity
- Operating temperature range defines environmental operating envelope
Substitute parts are grouped into two categories based on amplifier type classification:
Category 1: General Purpose Amplifiers — OPA2171AID, OPA2171AIDR, OPA2171AQDRQ1, OPA2172ID, OPA2172IDR. These devices maintain general purpose amplifier classification with dual-channel, rail-to-rail configuration in 8-SOIC packages. Performance characteristics vary in slew rate and gain bandwidth product.
Category 2: Specialized Amplifier Types — AD823AARZ, AD823AARZ-R7, AD823AARZ-RL (J-FET amplifiers), OPA1662AIDRQ1 (audio amplifier), OPA2211AIDDA (general purpose with enhanced performance). These devices provide alternative amplifier topologies or performance enhancements while maintaining dual-channel, rail-to-rail, 8-SOIC package compatibility.
Parameter Comparison
| Part Number | Manufacturer | Amplifier Type | Slew Rate (V/µs) | GBW (MHz) | Input Bias (pA) | Input Offset (µV) | Supply Current (mA) | Output Current (mA) | Supply Min (V) | Supply Max (V) | Temp Range (°C) | Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| LT1881CS8#TRPBF | Analog Devices | General Purpose | 0.4 | 0.85 | 150 | 30 | 0.85 | 40 | 2.7 | 36 | 0 to 70 | 8-SOIC |
| AD823AARZ | Analog Devices | J-FET | 35 | 10 | 1.3 | 800 | 6.3 | 17 | 3 | 36 | -40 to 85 | 8-SOIC |
| AD823AARZ-R7 | Analog Devices | J-FET | 35 | 10 | 1.3 | 800 | 6.3 | 17 | 3 | 36 | -40 to 85 | 8-SOIC |
| AD823AARZ-RL | Analog Devices | J-FET | 35 | 10 | 1.3 | 800 | 6.3 | 17 | 3 | 36 | -40 to 85 | 8-SOIC |
| OPA1662AIDRQ1 | Texas Instruments | Audio | 17 | 22 | 600 | 500 | 1.5 | 50 | 3 | 36 | -40 to 85 | 8-SOIC |
| OPA2171AID | Texas Instruments | General Purpose | 1.5 | 3 | 8 | 250 | 0.475 | 35 | 2.7 | 36 | -40 to 125 | 8-SOIC |
| OPA2171AIDR | Texas Instruments | General Purpose | 1.5 | 3 | 8 | 250 | 0.475 | 35 | 2.7 | 36 | -40 to 125 | 8-SOIC |
| OPA2171AQDRQ1 | Texas Instruments | General Purpose | 1.5 | 3 | 8 | 250 | 0.475 | 35 | 2.7 | 36 | -40 to 125 | 8-SOIC |
| OPA2172ID | Texas Instruments | General Purpose | 10 | 10 | 8 | 200 | 1.6 | 75 | 4.5 | 36 | -40 to 125 | 8-SOIC |
| OPA2172IDR | Texas Instruments | General Purpose | 10 | 10 | 8 | 200 | 1.6 | 75 | 4.5 | 36 | -40 to 125 | 8-SOIC |
| OPA2211AIDDA | Texas Instruments | General Purpose | 27 | 80 | 60 | 30 | 3.6 | 45 | 4.5 | 36 | -40 to 125 | 8-PowerSOIC |
Engineering Selection Recommendations
Direct Substitution for General Purpose Applications:
OPA2171AID, OPA2171AIDR, and OPA2171AQDRQ1 are suitable substitutes when the application requires general purpose amplification with extended operating temperature range (-40°C to 125°C) and identical supply voltage compatibility (2.7 V to 36 V). These devices maintain dual-channel, rail-to-rail configuration in 8-SOIC packages. OPA2171AQDRQ1 includes automotive-grade qualification (AEC-Q100) for applications requiring automotive reliability standards.
Enhanced Performance Substitution:
OPA2172ID and OPA2172IDR provide increased slew rate (10 V/µs) and gain bandwidth product (10 MHz) compared to the LT1881CS8#TRPBF (0.4 V/µs, 850 kHz). These devices are suitable when higher-speed signal processing is required. Minimum supply voltage requirement is 4.5 V, which restricts use in applications requiring 2.7 V operation.
OPA2211AIDDA offers the highest performance envelope with 27 V/µs slew rate and 80 MHz gain bandwidth product, along with matching input offset voltage (30 µV) to the LT1881CS8#TRPBF. This device is packaged in 8-PowerSOIC format and requires minimum 4.5 V supply voltage.
Specialized Topology Substitution:
AD823AARZ, AD823AARZ-R7, and AD823AARZ-RL employ J-FET input topology, providing extremely low input bias current (1.3 pA) and extended operating temperature range (-40°C to 125°C). These devices require minimum 3 V supply voltage and are suitable for high-impedance signal sources. Increased input offset voltage (800 µV) and higher supply current (6.3 mA) must be evaluated against application requirements.
OPA1662AIDRQ1 is an audio-grade amplifier with automotive qualification (AEC-Q100). This device provides enhanced output current capability (50 mA) and is suitable for audio signal processing applications requiring automotive reliability standards.
Compliance and Certification:
All substitute parts maintain RoHS3 compliance and REACH unaffected status, consistent with the LT1881CS8#TRPBF. Moisture sensitivity levels vary from MSL 1 (unlimited) to MSL 3 (168 hours), affecting storage and handling requirements. OPA2171AQDRQ1 and OPA1662AIDRQ1 include AEC-Q100 automotive qualification for applications requiring automotive-grade components.
Frequently Asked Questions (FAQ)
Q: Can OPA2171AIDR be used as a direct replacement for LT1881CS8#TRPBF?
A: OPA2171AIDR is mechanically and electrically compatible for most general purpose amplification applications. Both devices feature dual-channel, rail-to-rail configuration in 8-SOIC packages with 2.7 V to 36 V supply range. The OPA2171AIDR provides extended operating temperature range (-40°C to 125°C versus 0°C to 70°C) and lower input bias current (8 pA versus 150 pA). Slew rate and gain bandwidth product are lower on the OPA2171AIDR (1.5 V/µs and 3 MHz versus 0.4 V/µs and 850 kHz), which is acceptable for low-frequency applications but may limit high-speed signal processing capability.
Q: What is the primary difference between AD823AARZ variants (AD823AARZ, AD823AARZ-R7, AD823AARZ-RL)?
A: All three AD823AARZ variants share identical electrical specifications and 8-SOIC package configuration. The differences are in packaging format: AD823AARZ is supplied in tube packaging, while AD823AARZ-R7 and AD823AARZ-RL are supplied in cut tape with Digi-Reel format. Selection depends on procurement and assembly requirements. AD823AARZ-RL has the highest inventory availability (16,200 pcs).
Q: Why does OPA2172ID require a minimum 4.5 V supply voltage while LT1881CS8#TRPBF operates at 2.7 V minimum?
A: OPA2172ID is designed with enhanced performance specifications (10 V/µs slew rate, 10 MHz gain bandwidth product) that require higher minimum supply voltage for proper circuit operation. Applications requiring 2.7 V minimum supply voltage must use LT1881CS8#TRPBF, OPA2171 series, or AD823 series devices, which support this lower voltage threshold.
Q: Is OPA2211AIDDA compatible with the LT1881CS8#TRPBF PCB footprint?
A: OPA2211AIDDA uses 8-PowerSOIC package format, which differs from the standard 8-SOIC package of the LT1881CS8#TRPBF. While both packages have 0.154" (3.90mm) width, the PowerSOIC variant includes an additional thermal pad on the bottom. PCB footprint compatibility must be verified before substitution. The PowerSOIC package provides enhanced thermal dissipation suitable for higher-power applications.
Q: Which substitute part is recommended for automotive applications?
A: OPA2171AQDRQ1 and OPA1662AIDRQ1 both include AEC-Q100 automotive qualification. OPA2171AQDRQ1 is a general purpose amplifier suitable for general automotive signal conditioning, while OPA1662AIDRQ1 is optimized for audio signal processing in automotive systems. Selection depends on specific application requirements.
Q: What is the impact of input bias current differences between LT1881CS8#TRPBF and substitute parts?
A: LT1881CS8#TRPBF has 150 pA input bias current. AD823 series devices have 1.3 pA (extremely low for high-impedance sources), while OPA2171 and OPA2172 series have 8 pA. Lower input bias current reduces errors in high-impedance signal conditioning applications. For standard impedance sources (below 100 kΩ), input bias current differences are negligible.
Q: Can OPA1662AIDRQ1 be used in non-audio applications?
A: OPA1662AIDRQ1 is classified as an audio amplifier but functions as a general purpose dual-channel, rail-to-rail operational amplifier. It is suitable for any application requiring the specified electrical parameters: 17 V/µs slew rate, 22 MHz gain bandwidth product, 3 V to 36 V supply range, and 8-SOIC package. Audio classification indicates optimization for audio frequency response characteristics but does not restrict use in other applications.
Q: What packaging options are available for substitute parts?
A: Substitute parts are available in multiple packaging formats: tube (OPA2171AID, OPA2172ID, OPA2211AIDDA), cut tape with Digi-Reel (OPA2171AIDR, OPA2172IDR, OPA1662AIDRQ1, AD823AARZ-R7, AD823AARZ-RL), and tape & reel (OPA2171AQDRQ1). Selection depends on procurement volume and assembly process requirements. Cut tape and tape & reel formats are suitable for automated assembly, while tube packaging is used for manual assembly or lower-volume applications.
Alternative Parts
SJ6012L2TP
Littelfuse Inc.
6 Alternative Parts
JMK107BBJ476MA-RE
Taiyo Yuden
10 Alternative Parts
GMK107BBJ475MA-T
Taiyo Yuden
5 Alternative Parts
SJ6020N2ARP
Littelfuse Inc.
3 Alternative Parts
SJ6025R2ATP
Littelfuse Inc.
4 Alternative Parts
2474-05L
API Delevan Inc.
1 Alternative Parts
4590R-684K
API Delevan Inc.
1 Alternative Parts
CM6560R-334
API Delevan Inc.
1 Alternative Parts
CM6460-104
API Delevan Inc.
1 Alternative Parts
5526-12
API Delevan Inc.
1 Alternative Parts