LT1783CS5#TRPBF Equivalent & Substitute Parts

Part Overview

The LT1783CS5#TRPBF is a general-purpose operational amplifier manufactured by Analog Devices Inc., designed for rail-to-rail output applications in a compact TSOT-23-5 surface mount package. This single-circuit amplifier operates across a 2.5 V to 18 V supply range and is classified as an active product with full RoHS3 compliance. Substitute parts are identified when original components face supply constraints, obsolescence risks, or when design flexibility permits alternative sourcing while maintaining functional equivalence within specified electrical and mechanical parameters.

Substiute Parts

LT1783CS5#TRPBF

Analog Devices Inc.In Stock: 2742LT1783CS5#TRPBF Datasheet

Current PartRFQ

TLV2381IDBVT

Texas InstrumentsIn Stock: 1000321TLV2381IDBVT Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the LT1783CS5#TRPBF is permissible when the following criteria are satisfied:

Primary Substitution Criteria:

• Amplifier Type: General Purpose
• Number of Circuits: 1
• Output Type: Rail-to-Rail
• Package / Case: TSOT-23-5 or equivalent SOT-23-5 footprint
• Mounting Type: Surface Mount
• Voltage - Supply Span (Min): ≥ 2.5 V
• Voltage - Supply Span (Max): ≥ 18 V
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level (MSL): 1 (Unlimited)

The TLV2381IDBVT from Texas Instruments satisfies all primary substitution criteria. Both devices feature identical circuit count, output configuration, and package footprint compatibility. The TLV2381IDBVT operates within a 2.7 V to 16 V supply range, which encompasses the LT1783CS5#TRPBF minimum requirement of 2.5 V but does not extend to the maximum 18 V specification. Both components maintain RoHS3 compliance and MSL Level 1 rating, ensuring equivalent environmental and handling characteristics.

Parameter Comparison

Engineering Selection Recommendations

LT1783CS5#TRPBF Selection Criteria:

• Primary choice when supply voltage extends to 18 V maximum
• Required when slew rate performance of 0.45 V/µs is specified
• Necessary when gain bandwidth product of 1.3 MHz is required
• Preferred for applications with operating temperature limited to 0°C to 70°C range
• Active product status with established supply chain availability

TLV2381IDBVT Selection Criteria:

• Suitable for applications operating within 2.7 V to 16 V supply range
• Applicable when lower supply current (7 µA) is advantageous
• Acceptable when higher output current capability (400 mA) is required
• Permissible for extended operating temperature range (-40°C to 125°C)
• Active product status with established supply chain availability

Both components maintain full RoHS3 compliance and MSL Level 1 rating, ensuring equivalent regulatory and environmental qualification. Selection between these parts depends on specific application voltage, current, and temperature requirements rather than compliance or reliability factors.

Frequently Asked Questions (FAQ)

Q: Can the TLV2381IDBVT directly replace the LT1783CS5#TRPBF in all applications?

A: Direct replacement is permissible only when the application operates within the TLV2381IDBVT supply voltage range of 2.7 V to 16 V. Applications requiring operation at 18 V maximum supply voltage cannot use the TLV2381IDBVT as a substitute. Verify that slew rate and gain bandwidth product specifications do not require the higher performance of the LT1783CS5#TRPBF.

Q: Are the TSOT-23-5 and SOT-23-5 packages mechanically compatible?

A: Both packages are surface mount configurations with identical pin counts and footprint dimensions. The TSOT-23-5 (Thin SOT-23-5) and SOT-23-5 designations refer to the same physical package standard, ensuring mechanical and electrical compatibility on printed circuit boards designed for either variant.

Q: What are the key electrical differences between these two parts?

A: The LT1783CS5#TRPBF provides higher slew rate (0.45 V/µs versus 0.06 V/µs) and higher gain bandwidth product (1.3 MHz versus 160 kHz). The TLV2381IDBVT offers lower supply current (7 µA versus 230 µA) and higher output current capability (400 mA versus 30 mA). Both devices share identical input offset voltage (500 µV) and package configuration.

Q: Do both parts have the same moisture sensitivity rating?

A: Yes. Both the LT1783CS5#TRPBF and TLV2381IDBVT carry MSL Level 1 (Unlimited) rating, indicating no moisture sensitivity restrictions and unlimited shelf life under standard storage conditions.

Q: What is the temperature operating range difference?

A: The LT1783CS5#TRPBF operates from 0°C to 70°C, while the TLV2381IDBVT operates from -40°C to 125°C. The TLV2381IDBVT supports extended temperature operation, but this does not affect substitution eligibility if the application operates within the narrower 0°C to 70°C range.

Q: Are both parts RoHS3 compliant?

A: Yes. Both the LT1783CS5#TRPBF and TLV2381IDBVT are ROHS3 compliant, meeting all current lead-free and hazardous substance restrictions for electronic components.