LT1364CS8 Equivalent & Substitute Parts

Part Overview

The LT1364CS8 is a voltage feedback amplifier integrated circuit manufactured by Analog Devices Inc., containing two independent circuits in an 8-SOIC surface mount package. This device is classified as a linear amplifier and maintains Active product status. The LT1364CS8 operates across a wide supply voltage range of 5V to 36V and is designed for applications requiring high slew rate performance and moderate bandwidth characteristics. Substitute parts are identified when inventory constraints, packaging preferences, or specific application requirements necessitate alternative component selection while maintaining functional compatibility.

Substiute Parts

LT1364CS8

Analog Devices Inc.In Stock: 11221LT1364CS8 Datasheet

Current PartRFQ

ADA4898-2YRDZ

Analog Devices Inc.In Stock: 4359ADA4898-2YRDZ Datasheet

SimilarRFQ

ADA4898-2YRDZ-R7

Analog Devices Inc.In Stock: 3214ADA4898-2YRDZ-R7 Datasheet

SimilarRFQ

OPA2277MDTEP

Texas InstrumentsIn Stock: 692067OPA2277MDTEP Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the LT1364CS8 are identified based on the following substitution criteria:

Primary Substitution Parameters:

• Amplifier Type: Voltage Feedback
• Number of Circuits: 2
• Package / Case: 8-SOIC (0.154", 3.90mm Width)
• Mounting Type: Surface Mount
• RoHS Status: ROHS3 Compliant

Acceptable Variation Parameters: Substitute parts may differ in slew rate, gain bandwidth product, input bias current, input offset voltage, supply current, output current per channel, supply voltage span, operating temperature range, and moisture sensitivity level, provided the substitute part maintains the core functional architecture (dual-channel voltage feedback amplifier in 8-SOIC package).

The identified substitute parts are:

• ADA4898-2YRDZ (Tube packaging)
• ADA4898-2YRDZ-R7 (Cut Tape & Digi-Reel packaging)
• OPA2277MDTEP (General Purpose Amplifier variant)

Parameter Comparison

Engineering Selection Recommendations

LT1364CS8 Primary Selection: The LT1364CS8 is the primary component choice when high slew rate performance (1000 V/µs) and moderate bandwidth (70 MHz) are required within the 0°C to 70°C operating temperature range. This device offers superior slew rate characteristics compared to substitute options and maintains ROHS3 compliance with MSL Level 1 moisture sensitivity rating.

ADA4898-2YRDZ and ADA4898-2YRDZ-R7 Selection: The ADA4898-2YRDZ and ADA4898-2YRDZ-R7 are functionally equivalent voltage feedback amplifiers from Analog Devices Inc. These parts differ primarily in packaging format (Tube versus Cut Tape & Digi-Reel) and offer extended operating temperature range (-40°C to 105°C). Selection of these parts is appropriate when lower slew rate (55 V/µs) and bandwidth (50 MHz) specifications are acceptable, and when extended temperature operation or specific packaging requirements are necessary. Both variants maintain ROHS3 compliance and Active product status.

OPA2277MDTEP Selection: The OPA2277MDTEP from Texas Instruments is a general purpose amplifier variant with significantly reduced slew rate (0.8 V/µs) and bandwidth (1 MHz). This part is suitable only for applications where high-speed performance is not required. The OPA2277MDTEP offers the lowest supply current consumption (790 µA per 2 channels) and extended operating temperature range (-55°C to 125°C). Selection of this part requires confirmation that reduced dynamic performance specifications are compatible with the target application.

Compliance and Certification: All identified substitute parts maintain ROHS3 compliance and Active product status, ensuring regulatory alignment with the primary LT1364CS8 component.

Frequently Asked Questions (FAQ)

Q: Can the ADA4898-2YRDZ directly replace the LT1364CS8 in all applications?

A: The ADA4898-2YRDZ maintains the same dual-channel voltage feedback amplifier architecture and 8-SOIC package footprint. However, the ADA4898-2YRDZ exhibits lower slew rate (55 V/µs versus 1000 V/µs) and reduced gain bandwidth product (50 MHz versus 70 MHz). Direct substitution is valid only when the application does not require the higher dynamic performance specifications of the LT1364CS8.

Q: What is the difference between ADA4898-2YRDZ and ADA4898-2YRDZ-R7?

A: Both parts are electrically identical voltage feedback amplifiers with identical electrical specifications. The primary difference is packaging format: ADA4898-2YRDZ is supplied in Tube packaging, while ADA4898-2YRDZ-R7 is supplied in Cut Tape & Digi-Reel format. Selection between these variants depends on assembly process requirements and inventory management preferences.

Q: Is the OPA2277MDTEP suitable as a substitute for high-speed applications?

A: The OPA2277MDTEP is classified as a general purpose amplifier with significantly reduced performance specifications compared to the LT1364CS8. With a slew rate of 0.8 V/µs and gain bandwidth product of 1 MHz, this part is not suitable for applications requiring high-speed signal processing. The OPA2277MDTEP is appropriate only for low-frequency, low-speed applications where power consumption is a primary design constraint.

Q: What are the package differences between substitute parts?

A: The LT1364CS8 and OPA2277MDTEP are supplied in standard 8-SOIC packages. The ADA4898-2YRDZ and ADA4898-2YRDZ-R7 are supplied in 8-SOIC packages with exposed pads, providing enhanced thermal performance. All parts maintain the same 0.154" (3.90mm) width footprint and are compatible with standard 8-SOIC PCB layouts.

Q: How do supply voltage requirements affect substitution decisions?

A: The LT1364CS8 operates across 5V to 36V supply range. The ADA4898-2YRDZ and ADA4898-2YRDZ-R7 require minimum 9V supply voltage, restricting use in 5V-only systems. The OPA2277MDTEP operates from 4V minimum, providing broader low-voltage compatibility. Supply voltage requirements must be verified against specific application power distribution architecture before substitution.

Q: What is the significance of Moisture Sensitivity Level differences?

A: The LT1364CS8 carries MSL Level 1 (Unlimited) rating, indicating no moisture sensitivity constraints during storage and handling. Substitute parts ADA4898-2YRDZ, ADA4898-2YRDZ-R7, and OPA2277MDTEP carry MSL Level 3 (168 Hours) rating, requiring controlled storage conditions and limiting shelf life to 168 hours after moisture barrier bag opening. Assembly processes must account for these moisture sensitivity requirements.

Q: Are all substitute parts RoHS compliant?

A: All identified substitute parts—ADA4898-2YRDZ, ADA4898-2YRDZ-R7, and OPA2277MDTEP—maintain ROHS3 compliance status, matching the regulatory compliance profile of the primary LT1364CS8 component.