Request Quote
(Ships tomorrow)
LSYDC1A Snap Action Switch - Equivalent & Substitute Parts
Part Overview
The LSYDC1A is a snap action switch manufactured by Honeywell Sensing and Productivity Solutions. This SPDT (Single Pole Double Throw) switch is designed for chassis mount applications with a roller plunger actuator and plug-in termination style. The switch is rated for 10A AC at 120V and 800mA DC at 115V, with an operating temperature range of -12°C to 121°C. The product is currently active and RoHS compliant.
Equivalent and substitute parts are identified when component availability is limited, supply chain disruptions occur, or design flexibility permits selection from qualified alternatives that meet the same electrical and mechanical specifications within defined tolerances.
Substiute Parts
Key Parameters
| Parameter | Value | Significance for Substitution |
|---|---|---|
| Circuit Configuration | SPDT (DB/DM) | Defines electrical switching capability; must match for direct substitution |
| Current Rating (AC) | 10A | Maximum AC load capacity; substitute must meet or exceed this rating |
| Voltage Rating (AC) | 120V | Maximum AC voltage; substitute must support this voltage level |
| Actuator Type | Roller Plunger | Mechanical actuation method; determines physical engagement characteristics |
| Mounting Type | Chassis Mount | Installation method; must be compatible with existing mechanical design |
| Operating Temperature Range | -12°C to 121°C | Environmental operating limits; substitute must cover this range |
| RoHS Compliance | Yes | Regulatory requirement; substitute must maintain compliance |
Substitute Part Grouping Explanation
The D4A-3310N from Omron Automation and Safety is identified as a substitute for the LSYDC1A based on the following substitution criteria:
Matching Parameters:
- Circuit configuration: Both are SPDT (DB/DM) switches
- AC current rating: Both rated for 10A AC
- Actuator type: Both use roller plunger actuation
- Mounting type: Both are chassis mount
- RoHS compliance: Both are RoHS compliant
- Moisture sensitivity level: Both are MSL 1 (Unlimited)
Allowable Variations:
- AC voltage rating: D4A-3310N is rated 125V AC (exceeds 120V requirement)
- Termination style: D4A-3310N uses screw terminal versus plug-in on LSYDC1A
- Ingress protection: D4A-3310N includes IP67 rating (additional feature)
- Operating force: D4A-3310N is 1800gf versus 1814gf (within tolerance)
Limiting Factors:
- DC current rating: D4A-3310N is rated 6A DC versus 800mA DC on LSYDC1A; substitution is valid only for AC applications
- Operating temperature: D4A-3310N range is -10°C to 80°C; does not cover full lower temperature range of LSYDC1A
Parameter Comparison
| Parameter | LSYDC1A (Honeywell) | D4A-3310N (Omron) | Compatibility Notes |
|---|---|---|---|
| Manufacturer | Honeywell Sensing and Productivity Solutions | Omron Automation and Safety | Different manufacturers |
| Circuit | SPDT (DB/DM) | SPDT (DB/DM) | Identical |
| Switch Function | On-Mom | On-Mom | Identical |
| Current Rating (AC) | 10A | 10A | Identical |
| Current Rating (DC) | 800mA | 6A | D4A-3310N exceeds requirement |
| Voltage Rating (AC) | 120V | 125V | D4A-3310N exceeds requirement |
| Voltage Rating (DC) | 115V | 30V | D4A-3310N below requirement; DC substitution not recommended |
| Actuator Type | Roller Plunger | Roller Plunger | Identical |
| Mounting Type | Chassis Mount | Chassis Mount | Identical |
| Termination Style | Plug In | Screw Terminal | Different; requires wiring modification |
| Ingress Protection | Not specified | IP67 | D4A-3310N provides additional protection |
| Operating Force | 1814gf | 1800gf | Within tolerance |
| Pretravel | 0.071" (1.8mm) | 0.063" (1.6mm) | Minor difference |
| Differential Travel | 0.016" (0.4mm) | 0.016" (0.4mm) | Identical |
| Overtravel | 0.190" (4.8mm) | 0.201" (5.1mm) | Minor difference |
| Operating Temperature | -12°C to 121°C | -10°C to 80°C | D4A-3310N does not cover full range |
| RoHS Status | RoHS Compliant | RoHS Compliant | Identical |
| MSL Rating | 1 (Unlimited) | 1 (Unlimited) | Identical |
Engineering Selection Recommendations
AC Application Substitution (Recommended): The D4A-3310N is suitable as a substitute for LSYDC1A in AC-only applications operating within the temperature range of -10°C to 80°C. Both parts are active products with RoHS compliance and equivalent SPDT circuit configuration. The D4A-3310N provides higher voltage and current ratings, ensuring adequate margin for AC loads. The screw terminal termination requires wiring modification compared to the plug-in style of the LSYDC1A.
DC Application Substitution (Not Recommended): The D4A-3310N is not suitable for DC applications requiring 115V operation. The substitute part is rated only 30V DC, which is insufficient for the LSYDC1A's 115V DC specification.
Temperature-Limited Applications: Applications requiring operation below -10°C or above 80°C must use the LSYDC1A, as the D4A-3310N does not cover the full operating temperature range of the original part.
Compliance and Availability: Both parts maintain active product status and RoHS compliance, supporting long-term supply chain stability and regulatory requirements.
Frequently Asked Questions (FAQ)
Q: Can the D4A-3310N directly replace the LSYDC1A in all applications?
A: No. The D4A-3310N is suitable only for AC applications within the temperature range -10°C to 80°C. DC applications and extreme temperature environments require the LSYDC1A.
Q: What is the primary difference in termination style between these parts?
A: The LSYDC1A uses plug-in termination, while the D4A-3310N uses screw terminal connections. This requires modification to the wiring harness or connector interface during substitution.
Q: Are both parts RoHS compliant?
A: Yes. Both the LSYDC1A and D4A-3310N are RoHS compliant with MSL 1 (Unlimited) moisture sensitivity rating.
Q: What is the voltage margin when using the D4A-3310N as a substitute?
A: The D4A-3310N is rated 125V AC, providing a 5V margin above the LSYDC1A's 120V AC requirement. This additional margin is acceptable for AC applications.
Q: Does the D4A-3310N provide any additional features?
A: Yes. The D4A-3310N includes IP67 ingress protection (dust tight, waterproof) and a status indicator, which are not specified on the LSYDC1A. These features do not prevent substitution but may provide environmental benefits in certain applications.
Q: What mechanical differences exist between these switches?
A: Operating force is nearly identical (1814gf vs. 1800gf). Pretravel and overtravel differ slightly (0.071" vs. 0.063" and 0.190" vs. 0.201" respectively), but both maintain the same 0.016" differential travel. These minor variations are within acceptable mechanical tolerance for SPDT snap action switches.
Q: Can the D4A-3310N be used in applications requiring 115V DC operation?
A: No. The D4A-3310N is rated only 30V DC, which is insufficient for 115V DC applications. The LSYDC1A must be used for DC voltage requirements.
Alternative Parts
SJ6012L2TP
Littelfuse Inc.
6 Alternative Parts
JMK107BBJ476MA-RE
Taiyo Yuden
10 Alternative Parts
GMK107BBJ475MA-T
Taiyo Yuden
5 Alternative Parts
SJ6020N2ARP
Littelfuse Inc.
3 Alternative Parts
SJ6025R2ATP
Littelfuse Inc.
4 Alternative Parts
2474-05L
API Delevan Inc.
1 Alternative Parts
4590R-684K
API Delevan Inc.
1 Alternative Parts
CM6560R-334
API Delevan Inc.
1 Alternative Parts
CM6460-104
API Delevan Inc.
1 Alternative Parts
5526-12
API Delevan Inc.
1 Alternative Parts