LSHM-150-L2.5-F-DV-A-S-TR Equivalent & Substitute Parts

Part Overview

The LSHM-150-L2.5-F-DV-A-S-TR is a 100-position self-mating, non-gendered hermaphroditic rectangular connector from Samtec Inc.'s Razor Beam™ LSHM series. This surface mount connector features gold-plated contacts, board guide, and shielding for high-density interconnect applications. The part is Active in product status with ROHS3 compliance and unlimited moisture sensitivity rating (MSL 1). Substitute parts may be required due to inventory constraints, supply chain disruptions, or design revision requirements while maintaining electrical and mechanical compatibility.

Substiute Parts

LSHM-150-L2.5-F-DV-A-S-TR

Samtec Inc.In Stock: 730LSHM-150-L2.5-F-DV-A-S-TR Datasheet

Current PartRFQ

LSHM-150-02.5-F-DV-A-S-TR

Samtec Inc.In Stock: 1252LSHM-150-02.5-F-DV-A-S-TR Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the LSHM-150-L2.5-F-DV-A-S-TR is determined by strict adherence to the following critical parameters:

• Connector Type: Must be self-mating, non-gendered, hermaphroditic
• Number of Positions: Must be 100
• Pitch: Must be 0.020" (0.50mm)
• Number of Rows: Must be 2
• Mounting Type: Must be surface mount
• Contact Finish: Must be gold with 3.00µin thickness
• Height Above Board: Must be 0.156" (3.96mm)
• Mated Stacking Heights: Must support 5mm, 5.5mm, 6.5mm, 8.5mm
• Features: Must include board guide and shielding
• Series: Razor Beam™ LSHM
• Manufacturer: Samtec Inc.
• RoHS Status: ROHS3 Compliant
• MSL Rating: 1 (Unlimited)

The substitute part LSHM-150-02.5-F-DV-A-S-TR meets all these criteria and is therefore electrically and mechanically interchangeable.

Parameter Comparison

Engineering Selection Recommendations

Both the LSHM-150-L2.5-F-DV-A-S-TR and LSHM-150-02.5-F-DV-A-S-TR are Active products from Samtec Inc. with identical electrical and mechanical specifications. Both parts are ROHS3 compliant and carry MSL 1 rating. The substitute part LSHM-150-02.5-F-DV-A-S-TR is available with higher inventory (1158 pcs) compared to the primary part (698 pcs), making it suitable for direct substitution in applications requiring the Razor Beam™ LSHM 100-position self-mating connector with 0.50mm pitch and surface mount configuration.

Frequently Asked Questions (FAQ)

Q: Are LSHM-150-L2.5-F-DV-A-S-TR and LSHM-150-02.5-F-DV-A-S-TR pin-compatible?

A: Yes. Both connectors have identical pin counts (100 positions), pitch (0.020"/0.50mm), row configuration (2 rows), and contact finish specifications. They are electrically and mechanically interchangeable.

Q: Do both parts support the same mated stacking heights?

A: Yes. Both parts support mated stacking heights of 5mm, 5.5mm, 6.5mm, and 8.5mm, ensuring compatibility in applications with specific height requirements.

Q: Are there any compliance differences between these parts?

A: No. Both parts are ROHS3 compliant with identical moisture sensitivity levels (MSL 1, Unlimited). They meet the same regulatory and environmental standards.

Q: Can I use LSHM-150-02.5-F-DV-A-S-TR as a direct replacement on existing PCBs designed for LSHM-150-L2.5-F-DV-A-S-TR?

A: Yes. The substitute part has identical board-level footprint requirements, height above board (0.156"/3.96mm), and mounting type (surface mount). No PCB redesign is required.

Q: What is the difference in the part numbers between these two connectors?

A: The part numbers differ in the length specification designation (L2.5 versus 02.5). Both designations refer to the same physical and electrical characteristics within the Razor Beam™ LSHM series, resulting in fully compatible connectors.