LSHM-130-L2.5-F-DV-A-S-TR Equivalent & Substitute Parts

Part Overview

The LSHM-130-L2.5-F-DV-A-S-TR is a 60-position self-mating, non-gendered hermaphroditic rectangular connector from Samtec Inc.'s Razor Beam™ LSHM series. This surface mount connector features gold-plated contacts, board guide, and shielding. The part is Active status and ROHS3 compliant. Substitute parts may be required due to inventory availability, packaging format differences, or specific application requirements while maintaining electrical and mechanical compatibility.

Substiute Parts

LSHM-130-L2.5-F-DV-A-S-TR

Samtec Inc.In Stock: 1092LSHM-130-L2.5-F-DV-A-S-TR Datasheet

Current PartRFQ

LSHM-130-02.5-F-DV-A-S-TR

Samtec Inc.In Stock: 2180LSHM-130-02.5-F-DV-A-S-TR Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the LSHM-130-L2.5-F-DV-A-S-TR is determined by strict equivalence across the following critical parameters:

• Number of Positions: 60
• Pitch: 0.020" (0.50mm)
• Number of Rows: 2
• Connector Type: Self Mating, Non-Gendered, Hermaphroditic
• Mounting Type: Surface Mount
• Contact Finish: Gold
• Contact Finish Thickness: 3.00µin (0.076µm)
• Height Above Board: 0.156" (3.96mm)
• Features: Board Guide, Shielded
• Mated Stacking Heights: 5mm, 5.5mm, 6.5mm, 8.5mm
• Series: Razor Beam™ LSHM
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)

Substitute parts must maintain identical electrical and mechanical specifications across all parameters listed above. Packaging format (Tape & Reel vs. standard packaging) does not affect functional compatibility.

Parameter Comparison

Engineering Selection Recommendations

Both the LSHM-130-L2.5-F-DV-A-S-TR and LSHM-130-02.5-F-DV-A-S-TR are Active status products from Samtec Inc. and maintain full ROHS3 compliance. The parts are electrically and mechanically identical across all specified parameters. Selection between these parts should be based on packaging requirements: standard packaging for the main part number versus Tape & Reel (TR) packaging for the substitute. Both parts carry MSL 1 rating and are suitable for unlimited shelf life storage. Compliance certifications (ECCN: EAR99, HTSUS: 8536.69.4040) are equivalent across both part numbers.

Frequently Asked Questions (FAQ)

Q: Are LSHM-130-L2.5-F-DV-A-S-TR and LSHM-130-02.5-F-DV-A-S-TR electrically interchangeable?

A: Yes. Both parts maintain identical electrical specifications including 60 positions, 0.020" (0.50mm) pitch, gold contact finish at 3.00µin thickness, and self-mating hermaphroditic connector type.

Q: What is the difference between these two part numbers?

A: The primary difference is packaging format. LSHM-130-L2.5-F-DV-A-S-TR uses standard packaging, while LSHM-130-02.5-F-DV-A-S-TR is supplied in Tape & Reel (TR) format. All electrical and mechanical specifications are identical.

Q: Can I use LSHM-130-02.5-F-DV-A-S-TR as a direct replacement on the PCB?

A: Yes. The parts are mechanically identical with the same 0.156" (3.96mm) height above board, surface mount configuration, and board guide/shielded features. PCB footprints are identical.

Q: Are both parts ROHS3 compliant?

A: Yes. Both LSHM-130-L2.5-F-DV-A-S-TR and LSHM-130-02.5-F-DV-A-S-TR are ROHS3 compliant with MSL 1 rating.

Q: Which part should I select for high-volume production?

A: For high-volume applications, the Tape & Reel (TR) packaged version (LSHM-130-02.5-F-DV-A-S-TR) is typically preferred due to automated assembly compatibility and reduced handling costs.