LPX152M160H5P3 Equivalent & Substitute Parts Reference

Part Overview

The LPX152M160H5P3 is a 1500 µF, 160 V aluminum electrolytic capacitor manufactured by Cornell Dubilier Electronics (CDE) in a radial, can snap-in package. This component is designed for general-purpose applications requiring high capacitance density with through-hole mounting. The part is Active status and RoHS3 compliant.

Substitute parts are identified when equivalent electrical performance can be achieved within the specified parameter tolerances while maintaining mechanical compatibility. Alternative models may be required due to inventory availability, extended operational lifetime requirements, or enhanced voltage ratings for circuit margin optimization.

Substiute Parts

LPX152M160H5P3

Cornell Dubilier Electronics (CDE)In Stock: 723LPX152M160H5P3 Datasheet

Current PartRFQ

LPX152M200H7P3

Cornell Dubilier Electronics (CDE)In Stock: 769LPX152M200H7P3 Datasheet

SimilarRFQ

LLG2C152MELB30

NichiconIn Stock: 528262LLG2C152MELB30 Datasheet

DirectRFQ

LGU2Z152MELC

NichiconIn Stock: 274188LGU2Z152MELC Datasheet

UpgradeRFQ

LLS2D152MELC

NichiconIn Stock: 273993LLS2D152MELC Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution logic for the LPX152M160H5P3 is based on the following criteria:

Electrical Parameters (Non-Negotiable):

• Capacitance: 1500 µF (exact match required)
• Tolerance: ±20% or tighter
• Voltage Rating: Equal to or greater than 160 V
• Polarization: Polar (required)

Mechanical Parameters (Non-Negotiable):

• Package Type: Radial, Can - Snap-In
• Lead Spacing: 0.394" (10.00mm)
• Mounting Type: Through Hole

Performance Parameters (Flexible Within Limits):

• Operating Temperature Range: Must support -40°C to 85°C minimum
• ESR and Ripple Current: May vary based on manufacturer design
• Lifetime @ Temperature: Extended lifetime acceptable

Compliance Parameters:

• RoHS3 Compliance: Required
• REACH Status: REACH Unaffected acceptable

Substitutes are grouped into three categories: Similar (same voltage rating, same manufacturer), Direct (same voltage rating, different manufacturer), and Upgrade (higher voltage rating or extended lifetime, different manufacturer).

Parameter Comparison

Engineering Selection Recommendations

LPX152M200H7P3 (Similar Substitute - Same Manufacturer)

This part is a direct equivalent from Cornell Dubilier Electronics with identical electrical specifications (1500 µF, ±20% tolerance) but rated for 200 V instead of 160 V. The higher voltage rating provides additional circuit margin. Physical dimensions are identical except for height (40mm vs. 35mm seated height), which may require PCB layout verification. Both parts are Active status and ROHS3 compliant. This substitute is suitable when higher voltage headroom is required within the same product family.

LLG2C152MELB30 (Direct Substitute - Nichicon)

This Nichicon part maintains the 160 V rating and 1500 µF capacitance with ±20% tolerance. It offers extended lifetime (2000 Hrs @ 85°C vs. 1000 Hrs) and higher ripple current capability at 50 kHz (5.1 A vs. 3.63 A). Physical dimensions differ: 30mm diameter vs. 35mm diameter and 32mm height vs. 35mm height. This smaller footprint may provide PCB space benefits. All compliance requirements (ROHS3, REACH Unaffected) are met. This substitute is suitable for applications requiring improved thermal longevity without voltage upgrade.

LGU2Z152MELC (Upgrade Substitute - Nichicon)

This part provides enhanced performance with 180 V rating (above the 160 V requirement), extended operating temperature range (-40°C to 105°C vs. -40°C to 85°C), and significantly extended lifetime (3000 Hrs @ 105°C). Physical dimensions match the main part exactly (35mm diameter and height). All compliance requirements are satisfied. This upgrade is suitable for applications requiring extended operational life in elevated temperature environments or where voltage margin optimization is critical.

LLS2D152MELC (Upgrade Substitute - Nichicon)

This part offers the highest voltage rating (200 V) and extended lifetime (3000 Hrs @ 85°C). It provides the highest ripple current capability at both 120 Hz (4.06 A) and 50 kHz (6.09 A), indicating superior high-frequency performance. Physical dimensions match the main part exactly (35mm diameter and height). All compliance requirements are met. This upgrade is suitable for high-ripple-current applications or designs requiring maximum voltage headroom and thermal stability.

Frequently Asked Questions (FAQ)

Q: Can LPX152M200H7P3 be used as a direct replacement for LPX152M160H5P3?

A: Yes, with PCB layout verification. The electrical specifications are identical (1500 µF, ±20% tolerance), and both are Cornell Dubilier snap-in packages with 10mm lead spacing. The LPX152M200H7P3 has a higher voltage rating (200 V vs. 160 V), which is acceptable for circuits designed for 160 V operation. However, the seated height differs (40mm vs. 35mm), requiring confirmation that the PCB clearance accommodates the additional 5mm height.

Q: What is the key difference between the Nichicon LLG2C152MELB30 and the main part?

A: The LLG2C152MELB30 maintains the same 160 V rating and 1500 µF capacitance but offers doubled lifetime (2000 Hrs @ 85°C vs. 1000 Hrs). The physical footprint is smaller (30mm diameter vs. 35mm diameter), which may provide PCB space savings. Lead spacing remains identical at 10mm, ensuring PCB compatibility. The smaller diameter may require verification of clearance in the mounting area.

Q: When should LGU2Z152MELC be selected over other substitutes?

A: The LGU2Z152MELC should be selected when the application requires extended operating temperature capability (up to 105°C) or when maximum thermal longevity is critical (3000 Hrs @ 105°C). The 180 V rating provides voltage margin above the 160 V requirement. Physical dimensions match the main part exactly, eliminating layout concerns. This part is optimal for industrial or automotive applications with elevated ambient temperatures.

Q: Is LLS2D152MELC suitable for high-ripple-current applications?

A: Yes. The LLS2D152MELC provides the highest ripple current ratings among all substitutes: 4.06 A @ 120 Hz and 6.09 A @ 50 kHz. Combined with the 200 V rating and 3000 Hrs @ 85°C lifetime, this part is engineered for demanding power supply and filtering applications. Physical dimensions match the main part exactly (35mm diameter and height), ensuring direct PCB compatibility.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All substitute parts listed (LPX152M200H7P3, LLG2C152MELB30, LGU2Z152MELC, and LLS2D152MELC) are ROHS3 compliant and REACH unaffected, meeting current regulatory requirements for electronic component manufacturing and use.

Q: What is the impact of different ESR values on circuit performance?

A: The main part LPX152M160H5P3 specifies 133 mOhm ESR @ 120 Hz. The Nichicon substitutes (LLG2C152MELB30, LGU2Z152MELC, LLS2D152MELC) do not specify ESR values in the provided data. ESR affects voltage ripple, transient response, and thermal performance. For applications where ESR is critical, the specified 133 mOhm value should be verified with the substitute manufacturer before selection.

Q: Can substitutes with different physical dimensions be used interchangeably?

A: Physical dimensions must be verified against PCB layout constraints. The LLG2C152MELB30 has a smaller diameter (30mm vs. 35mm) and height (32mm vs. 35mm), which may provide space benefits but requires clearance confirmation. The LPX152M200H7P3 has increased height (40mm vs. 35mm), requiring vertical clearance verification. The LGU2Z152MELC and LLS2D152MELC match the main part dimensions exactly (35mm diameter and height), eliminating dimensional concerns. Lead spacing remains 10mm for all parts, ensuring PCB footprint compatibility.