LPV7215MG Equivalent & Substitute Parts

Part Overview

The LPV7215MG is a general-purpose CMOS comparator with push-pull output in SC-70-5 surface mount packaging. This device is classified as obsolete, which necessitates identification of active equivalent alternatives for ongoing design support and procurement. The LPV7215MG operates across a 1.8V to 5.5V supply range with low input offset voltage and minimal quiescent current, making it suitable for battery-powered and low-power applications requiring precision comparison functions.

Substiute Parts

LPV7215MG

Texas InstrumentsIn Stock: 2438LPV7215MG Datasheet

Current PartRFQ

LPV7215MG/NOPB

Texas InstrumentsIn Stock: 1475LPV7215MG/NOPB Datasheet

DirectRFQ

LPV7215MGX/NOPB

Texas InstrumentsIn Stock: 2228LPV7215MGX/NOPB Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the LPV7215MG are classified based on electrical parameter equivalence and package compatibility. The primary substitution criteria are:

• Supply voltage range: 1.8V ~ 5.5V
• Input offset voltage: 3mV @ 5V maximum
• Input bias current: 0.4pA @ 5V maximum
• Output type: CMOS, Push-Pull
• Package: 5-TSSOP, SC-70-5, SOT-353
• Operating temperature: -40°C ~ 85°C

Parts meeting all these electrical and mechanical parameters are classified as direct equivalents. The LPV7215MG/NOPB and LPV7215MGX/NOPB both satisfy these criteria and maintain identical functional specifications.

Parameter Comparison

Engineering Selection Recommendations

The LPV7215MG/NOPB and LPV7215MGX/NOPB are direct electrical and mechanical equivalents to the obsolete LPV7215MG. Both substitute parts are classified as active products with current manufacturing support from Texas Instruments.

For new designs and procurement, LPV7215MG/NOPB or LPV7215MGX/NOPB should be selected as replacements. Both parts maintain identical electrical performance across all specified parameters. The primary distinction is product status: the original LPV7215MG is obsolete, while both substitute parts are actively manufactured and supported.

Both substitute parts are ROHS3 compliant, whereas the original LPV7215MG is RoHS non-compliant. This compliance improvement is relevant for applications subject to RoHS regulations.

Frequently Asked Questions (FAQ)

Q: Can LPV7215MG/NOPB be used as a direct replacement for LPV7215MG?

A: Yes. The LPV7215MG/NOPB is electrically and mechanically identical to the LPV7215MG. All electrical parameters, package type, and pin configuration are equivalent. The primary difference is product status: LPV7215MG/NOPB is active and currently manufactured.

Q: What is the difference between LPV7215MG/NOPB and LPV7215MGX/NOPB?

A: Both parts are parametric equivalents with identical electrical specifications and package configuration. The difference in part number suffix does not reflect electrical or functional differences. Both are active products suitable for replacement applications.

Q: Are the substitute parts available in the same packaging as the original LPV7215MG?

A: Yes. All three parts use the 5-TSSOP, SC-70-5, SOT-353 surface mount package. PCB layout and component placement are compatible without modification.

Q: Why is the original LPV7215MG classified as obsolete?

A: Product obsolescence is determined by the manufacturer based on market demand and production decisions. Texas Instruments has transitioned support to the active equivalent parts LPV7215MG/NOPB and LPV7215MGX/NOPB.

Q: Are there any compliance differences between the original and substitute parts?

A: Yes. The original LPV7215MG is RoHS non-compliant, while both substitute parts (LPV7215MG/NOPB and LPV7215MGX/NOPB) are ROHS3 compliant. This is relevant for applications subject to RoHS directive requirements.

Q: Can I use these parts interchangeably in existing designs?

A: Yes. The electrical parameters, supply voltage range, output characteristics, and package configuration are identical. No circuit modifications or PCB redesign is required for substitution.