LPSR 25-NP Hall Effect Current Sensor Equivalent & Substitute Parts

Part Overview

The LPSR 25-NP is a closed-loop Hall Effect current sensor manufactured by LEM USA Inc., designed for AC/DC current measurement applications requiring 25A sensing capability. This through-hole module delivers ratiometric voltage output with bidirectional polarization support. The part is Active in product status with full RoHS compliance and REACH unaffected classification. Equivalent substitute parts are identified to support procurement flexibility, inventory management, and supply chain continuity for applications where the primary part number becomes unavailable or where design requirements permit cross-series substitution within the LEM sensor portfolio.

Substiute Parts

LPSR 25-NP

LEM USA Inc.In Stock: 1160LPSR 25-NP Datasheet

Current PartRFQ

LESR 25-NP

LEM USA Inc.In Stock: 752LESR 25-NP Datasheet

Parametric EquivalentRFQ

LKSR 25-NP

LEM USA Inc.In Stock: 1137LKSR 25-NP Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the LPSR 25-NP are identified based on strict parametric equivalence across all electrical and mechanical specifications. The substitution logic is based on the following criteria:

Substitution Criteria:

• Current sensing capacity: 25A
• Sensor technology: Hall Effect, Closed Loop
• Output configuration: Ratiometric, Voltage
• Sensitivity: 25mV/A
• Frequency response: 300kHz
• Linearity tolerance: ±0.1%
• Accuracy: ±1.25%
• Supply voltage range: 4.75V ~ 5.25V
• Response time: 400ns
• Maximum supply current: 32.5mA
• Operating temperature range: -40°C ~ 105°C
• Polarization: Bidirectional
• Mounting: Through Hole
• Package: Module
• Compliance: RoHS Compliant, REACH Unaffected

The substitute parts LESR 25-NP and LKSR 25-NP are members of different LEM series but maintain identical electrical performance and mechanical compatibility with the LPSR 25-NP. All three parts share the same parametric specifications, enabling direct functional substitution in circuit designs.

Parameter Comparison

Engineering Selection Recommendations

All three parts—LPSR 25-NP, LESR 25-NP, and LKSR 25-NP—are Active products from LEM USA Inc. with identical electrical specifications and mechanical compatibility. Selection between these parts is based on availability and supply chain considerations rather than technical differentiation.

Compliance and Certification Status:

• All parts are RoHS Compliant
• All parts are REACH Unaffected
• All parts carry EAR99 ECCN classification
• All parts are classified under HTSUS code 9030.33.3800
• All parts feature MSL Rating 1 (Unlimited moisture sensitivity)

Inventory Availability:

• LPSR 25-NP: 1058 Pcs New Original In Stock
• LESR 25-NP: 665 Pcs New Original In Stock
• LKSR 25-NP: 1098 Pcs New Original In Stock

For applications requiring the 25A Hall Effect closed-loop current sensor with the specified electrical and mechanical parameters, any of these three part numbers provides equivalent functional performance. Selection should prioritize availability and lead time requirements.

Frequently Asked Questions (FAQ)

Q: Can LESR 25-NP and LKSR 25-NP be used as direct replacements for LPSR 25-NP?

A: Yes. All three parts share identical electrical specifications including current sensing capacity (25A), output type (ratiometric voltage), sensitivity (25mV/A), frequency response (300kHz), accuracy (±1.25%), linearity (±0.1%), supply voltage range (4.75V ~ 5.25V), response time (400ns), and operating temperature range (-40°C ~ 105°C). They are mechanically compatible through-hole modules with identical package types. Direct substitution is supported for applications where these parameters are specified.

Q: What are the key electrical parameters that define substitution compatibility?

A: Substitution compatibility is determined by: current sensing range (25A), sensor technology (Hall Effect, Closed Loop), output configuration (ratiometric voltage), sensitivity (25mV/A), frequency response (300kHz), linearity (±0.1%), accuracy (±1.25%), supply voltage (4.75V ~ 5.25V), response time (400ns), and bidirectional polarization support. All substitute parts maintain these specifications.

Q: Are there any differences in packaging or mounting between these parts?

A: No. All three parts use identical through-hole mounting, module package type, and tray packaging format. There are no mechanical or packaging differences that would affect circuit board integration or assembly procedures.

Q: Do all parts meet the same compliance and regulatory requirements?

A: Yes. LPSR 25-NP, LESR 25-NP, and LKSR 25-NP are all RoHS Compliant, REACH Unaffected, classified as EAR99, and carry HTSUS code 9030.33.3800. All parts have MSL Rating 1 (Unlimited). Compliance status is identical across all three part numbers.

Q: What is the basis for selecting between these three equivalent parts?

A: Since all three parts are electrically and mechanically equivalent, selection should be based on inventory availability, lead time, and supply chain considerations. Current stock levels are: LPSR 25-NP (1058 Pcs), LESR 25-NP (665 Pcs), and LKSR 25-NP (1098 Pcs).

Q: Are there any application limitations or restrictions for using substitute parts?

A: No application limitations exist based on the provided specifications. All parts are Active products suitable for AC/DC current measurement applications requiring 25A sensing with closed-loop Hall Effect technology and ratiometric voltage output.