LP822M016A5P3 Equivalent & Substitute Parts

Part Overview

The LP822M016A5P3 is an 8200 µF, 16 V aluminum electrolytic capacitor manufactured by Cornell Dubilier Electronics (CDE) in a radial, can snap-in package. This component is rated for 1000 hours at 105°C and is designed for general-purpose applications requiring high capacitance values in compact form factors. The part is currently active in production with full RoHS3 compliance and REACH unaffected status.

Substitute parts are identified when equivalent electrical performance and mechanical compatibility can be maintained across different manufacturers or packaging configurations. Alternative components may be necessary due to inventory availability, lead time constraints, or specific application requirements while maintaining functional equivalence.

Substiute Parts

LP822M016A5P3

Cornell Dubilier Electronics (CDE)In Stock: 981LP822M016A5P3 Datasheet

Current PartRFQ

LP822M016E1P3

Cornell Dubilier Electronics (CDE)In Stock: 1134LP822M016E1P3 Datasheet

SimilarRFQ

LGY1C822MELZ30

NichiconIn Stock: 1090LGY1C822MELZ30 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the LP822M016A5P3 is determined by strict adherence to the following electrical and mechanical parameters:

Electrical Equivalence Criteria:

• Capacitance value: 8200 µF (exact match required)
• Voltage rating: 16 V (exact match required)
• Tolerance: ±20% (exact match required)
• Operating temperature range: -40°C ~ 105°C (exact match required)
• Polarization: Polar (exact match required)

Mechanical Compatibility Criteria:

• Mounting type: Through Hole (exact match required)
• Package type: Radial, Can - Snap-In (exact match required)
• Lead spacing: 0.394" (10.00mm) (exact match required)

Compliance Requirements:

• RoHS3 Compliant status (exact match required)
• REACH Unaffected status (exact match required)

All identified substitute parts meet these criteria. Physical dimensions (diameter and height) may vary within the constraints of the snap-in package design without affecting functional substitution, provided all other parameters remain equivalent.

Parameter Comparison

Engineering Selection Recommendations

LP822M016E1P3 (Cornell Dubilier Electronics)

This substitute maintains identical electrical specifications and compliance certifications as the main part. Both components are manufactured by the same supplier and belong to the same LP series. The LP822M016E1P3 differs in physical dimensions, with a larger diameter (1.181" vs. 0.866") and reduced height (0.984" vs. 1.378"). Selection of this part is appropriate when space constraints permit the larger radial dimension or when the reduced height provides layout advantages. Both parts are active products with equivalent RoHS3 and REACH compliance.

LGY1C822MELZ30 (Nichicon)

This substitute provides identical electrical specifications and compliance certifications with an extended lifetime rating of 5000 hours at 105°C compared to the 1000-hour rating of the main part. The LGY1C822MELZ30 maintains the same physical diameter as the main part (0.866") with a slightly reduced height (1.260" vs. 1.378"). This component is manufactured by Nichicon and belongs to the LGY series. Selection of this part is appropriate when extended operational life at elevated temperatures is required or when inventory availability of the primary part is constrained. The component is active and fully compliant with RoHS3 and REACH requirements.

Frequently Asked Questions (FAQ)

Q: Can LP822M016E1P3 be used as a direct replacement for LP822M016A5P3?

A: Yes. Both parts share identical electrical specifications: 8200 µF capacitance, 16 V rating, ±20% tolerance, and 1000-hour lifetime at 105°C. Both are RoHS3 compliant and REACH unaffected. The primary difference is physical dimensions. The LP822M016E1P3 has a larger diameter (1.181" vs. 0.866") and shorter height (0.984" vs. 1.378"). Verify that your PCB layout accommodates the larger radial dimension before substitution.

Q: Can LGY1C822MELZ30 be used as a direct replacement for LP822M016A5P3?

A: Yes. Both parts share identical electrical specifications: 8200 µF capacitance, 16 V rating, ±20% tolerance, and operating temperature range of -40°C to 105°C. Both are RoHS3 compliant and REACH unaffected. The LGY1C822MELZ30 provides an extended lifetime of 5000 hours at 105°C versus 1000 hours for the main part. Physical dimensions are similar, with the LGY1C822MELZ30 having the same diameter (0.866") but slightly reduced height (1.260" vs. 1.378"). This part is suitable for applications requiring extended thermal endurance.

Q: What are the key parameters that determine substitution eligibility?

A: Substitution eligibility is determined by exact matching of: capacitance (8200 µF), voltage rating (16 V), tolerance (±20%), operating temperature range (-40°C to 105°C), polarization (polar), mounting type (through hole), package type (radial, can snap-in), lead spacing (0.394" / 10.00mm), and compliance certifications (RoHS3 compliant, REACH unaffected). Physical dimensions may vary within the constraints of the snap-in package design.

Q: Are there differences in ESR (Equivalent Series Resistance) between the substitute parts?

A: The main part LP822M016A5P3 specifies an ESR of 81 mOhm at 120 Hz. ESR specifications are not provided for the substitute parts LP822M016E1P3 and LGY1C822MELZ30. When ESR performance is critical to your application, contact the manufacturer for detailed specifications before substitution.

Q: Do all three parts have the same ripple current ratings?

A: Ripple current specifications differ between parts. The main part LP822M016A5P3 is rated for 1.82 A at 120 Hz and 2.002 A at 100 kHz. The LGY1C822MELZ30 is rated for 2 A at 120 Hz and 2.3 A at 50 kHz. Ripple current specifications are not provided for LP822M016E1P3. Verify ripple current requirements for your specific application before substitution.

Q: What is the difference in packaging between these parts?

A: All three parts use radial, can snap-in packages with through-hole mounting and 0.394" (10.00mm) lead spacing. The main part LP822M016A5P3 is supplied in standard packaging. The substitute parts LP822M016E1P3 and LGY1C822MELZ30 are supplied in bulk packaging. Packaging format does not affect electrical or mechanical compatibility.

Q: Can I substitute based on physical dimensions alone?

A: No. Physical dimensions are secondary to electrical specifications. All three parts must match in capacitance, voltage rating, tolerance, operating temperature range, polarization, mounting type, package type, and lead spacing. Physical dimensions may vary, but electrical parameters must be identical for functional substitution.