LP3982IMMX-2.82 Equivalent & Substitute Parts

Part Overview

The LP3982IMMX-2.82 is a linear voltage regulator IC from Texas Instruments designed for positive fixed output applications. This device delivers 300mA output current at a fixed 2.82V output with a maximum dropout voltage of 0.22V at 200mA. The part integrates over-current, over-temperature, and reverse polarity protection features suitable for low-power supply applications requiring stable voltage regulation.

The LP3982IMMX-2.82 carries an Obsolete product status. Identifying equivalent substitute parts ensures design continuity and supply chain reliability for applications currently using this regulator.

Substiute Parts

LP3982IMMX-2.82

Texas InstrumentsIn Stock: 1986LP3982IMMX-2.82 Datasheet

Current PartRFQ

LP3982IMMX-2.82/NOPB

Texas InstrumentsIn Stock: 871LP3982IMMX-2.82/NOPB Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the LP3982IMMX-2.82 is determined by strict equivalence across the following critical parameters:

• Output voltage: 2.82V fixed
• Maximum output current: 300mA
• Maximum input voltage: 6V
• Package type: 8-VSSOP
• Mounting configuration: Surface Mount
• Protection features: Over Current, Over Temperature, Reverse Polarity
• Control features: Enable function
• Operating temperature range: -40°C ~ 85°C

The LP3982IMMX-2.82/NOPB represents a parametric equivalent from Texas Instruments with identical electrical specifications and package configuration. The primary distinction is packaging format (Tape & Reel versus bulk) and product status (Active versus Obsolete).

Parameter Comparison

Engineering Selection Recommendations

The LP3982IMMX-2.82/NOPB is the direct parametric equivalent for the obsolete LP3982IMMX-2.82. Both parts share identical electrical characteristics, output specifications, and package configuration. The substitute part carries Active product status, ensuring ongoing availability and supply chain support.

The LP3982IMMX-2.82/NOPB achieves ROHS3 compliance, whereas the original part is RoHS non-compliant. For applications subject to RoHS regulatory requirements, the substitute part satisfies compliance obligations while maintaining full functional equivalence.

Packaging format differs between the two parts: the original is supplied in bulk configuration, while the substitute is available in Tape & Reel format. This distinction affects procurement and assembly processes but does not impact electrical performance or circuit functionality.

Frequently Asked Questions (FAQ)

Q: Can LP3982IMMX-2.82/NOPB be used as a direct replacement for LP3982IMMX-2.82?

A: Yes. Both parts are parametrically equivalent with identical output voltage (2.82V), output current (300mA), input voltage rating (6V maximum), dropout voltage (0.22V @ 200mA), and package configuration (8-VSSOP). Electrical performance and circuit behavior are identical.

Q: What is the difference between these two part numbers?

A: The primary differences are product status (Obsolete versus Active), packaging format (bulk versus Tape & Reel), and RoHS compliance status (non-compliant versus ROHS3 compliant). Electrical specifications and package dimensions are identical.

Q: Does the RoHS compliance difference affect circuit performance?

A: No. RoHS compliance status reflects manufacturing process and material composition standards, not electrical performance. Both parts deliver identical voltage regulation, current capacity, and protection features.

Q: Are the package dimensions identical between these parts?

A: Yes. Both parts use the 8-VSSOP package with 0.118" width and 3.00mm height. PCB footprints and assembly processes are identical.

Q: Which part should be selected for new designs?

A: The LP3982IMMX-2.82/NOPB is recommended for new designs due to Active product status, ensuring long-term availability and supply chain continuity. This part also satisfies RoHS3 compliance requirements for regulated applications.