LP2986IMMX-5.0/NOPB Equivalent & Substitute Parts

Part Overview

The LP2986IMMX-5.0/NOPB is a linear voltage regulator IC from Texas Instruments designed for positive fixed 5V output applications. This Power Management (PMIC) device delivers 200mA output current with a maximum dropout voltage of 0.35V at full load, making it suitable for low-power supply regulation in embedded systems and portable electronics. The part is Active status and ROHS3 compliant, with unlimited moisture sensitivity rating (MSL 1). Substitute parts are identified based on matching electrical specifications, package compatibility, and regulatory compliance to ensure direct functional replacement in circuit designs.

Substiute Parts

LP2986IMMX-5.0/NOPB

Texas InstrumentsIn Stock: 2404LP2986IMMX-5.0/NOPB Datasheet

Current PartRFQ

LP2986AIMM-5.0/NOPB

Texas InstrumentsIn Stock: 1960LP2986AIMM-5.0/NOPB Datasheet

Parametric EquivalentRFQ

LP2987AIMM-5.0/NOPB

Texas InstrumentsIn Stock: 3546LP2987AIMM-5.0/NOPB Datasheet

Parametric EquivalentRFQ

LP2987IMM-5.0/NOPB

Texas InstrumentsIn Stock: 2708LP2987IMM-5.0/NOPB Datasheet

Parametric EquivalentRFQ

LP2988AIMM-5.0/NOPB

Texas InstrumentsIn Stock: 3578LP2988AIMM-5.0/NOPB Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the LP2986IMMX-5.0/NOPB are identified as parametric equivalents based on the following criteria:

• Fixed 5V output voltage configuration
• 200mA output current rating
• Maximum input voltage of 16V
• Dropout voltage of 0.35V @ 200mA
• 8-VSSOP package (8-TSSOP, 8-MSOP 0.118", 3.00mm Width)
• Enable control feature
• Over Current, Over Temperature, and Short Circuit protection
• Operating temperature range of -40°C ~ 125°C
• ROHS3 compliance and MSL 1 rating

All substitute parts maintain identical electrical performance specifications and package footprint compatibility, enabling direct circuit board replacement without design modification.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts listed maintain Active product status with ROHS3 compliance and REACH unaffected designation. Selection among LP2986AIMM-5.0/NOPB, LP2987AIMM-5.0/NOPB, LP2987IMM-5.0/NOPB, and LP2988AIMM-5.0/NOPB is based on inventory availability and part number variant requirements. Each substitute delivers identical electrical performance and package compatibility. The LP2987AIMM-5.0/NOPB and LP2988AIMM-5.0/NOPB variants offer higher inventory levels (3512 Pcs and 3487 Pcs respectively), supporting extended production schedules. All parts are classified under ECCN EAR99 and HTSUS 8542.39.0001 for regulatory documentation purposes.

Frequently Asked Questions (FAQ)

Q: Can LP2986AIMM-5.0/NOPB be used as a direct replacement for LP2986IMMX-5.0/NOPB?

A: Yes. Both parts share identical electrical specifications including 5V fixed output, 200mA current rating, 0.35V dropout voltage, and 8-VSSOP package configuration. The difference in part number suffix reflects manufacturing process variants that do not affect functional performance or circuit compatibility.

Q: What is the difference between LP2987 and LP2988 series substitutes?

A: LP2987AIMM-5.0/NOPB, LP2987IMM-5.0/NOPB, and LP2988AIMM-5.0/NOPB are parametric equivalents with identical electrical performance and package specifications. Part number variants indicate different product lines within the Texas Instruments LP298x regulator family, but all deliver the same 5V/200mA output characteristics required for LP2986IMMX-5.0/NOPB replacement.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All listed substitute parts carry ROHS3 compliance certification with MSL 1 (Unlimited) moisture sensitivity rating, matching the regulatory status of the LP2986IMMX-5.0/NOPB.

Q: Can these parts be used in applications requiring -40°C to 125°C operation?

A: Yes. All substitute parts are rated for -40°C to 125°C operating temperature range, supporting industrial and extended temperature applications.

Q: Is the 8-VSSOP package footprint identical across all substitute parts?

A: Yes. All substitute parts use the 8-VSSOP package (8-TSSOP, 8-MSOP 0.118", 3.00mm Width), ensuring PCB layout and assembly compatibility without design modification.