LP222M063C7P3 Equivalent & Substitute Parts

Part Overview

The LP222M063C7P3 is a 2200 µF, 63 V aluminum electrolytic capacitor manufactured by Cornell Dubilier Electronics (CDE) in a radial, can snap-in package. This component is rated for 1000 hours at 105°C and operates across the temperature range of -40°C to 105°C. The part is Active in product status and ROHS3 compliant, making it suitable for general-purpose applications requiring reliable energy storage and filtering in power supply circuits.

Equivalent and substitute parts are identified when design requirements permit flexibility in physical dimensions, voltage ratings, or thermal lifetime specifications while maintaining the core electrical parameters of 2200 µF capacitance and ±20% tolerance.

Substiute Parts

LP222M063C7P3

Cornell Dubilier Electronics (CDE)In Stock: 1011LP222M063C7P3 Datasheet

Current PartRFQ

LP222M063E3P3

Cornell Dubilier Electronics (CDE)In Stock: 2016LP222M063E3P3 Datasheet

SimilarRFQ

LP222M100H7P3

Cornell Dubilier Electronics (CDE)In Stock: 1752LP222M100H7P3 Datasheet

SimilarRFQ

LGY1J222MELZ35

NichiconIn Stock: 1184LGY1J222MELZ35 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the LP222M063C7P3 is determined by the following criteria:

Primary Electrical Parameters (Non-Negotiable):

• Capacitance: 2200 µF
• Tolerance: ±20%
• Polarization: Polar
• Mounting Type: Through Hole
• Package Type: Radial, Can - Snap-In
• Lead Spacing: 0.394" (10.00mm)

Secondary Parameters (Application-Dependent):

• Voltage Rating: 63 V or higher
• Lifetime @ 105°C: 1000 hours or longer
• Operating Temperature: -40°C to 105°C or wider
• RoHS Compliance: ROHS3 Compliant

Substitutes are grouped into two categories:

Category 1 - Same Voltage (63 V): Parts maintaining the 63 V rating with identical or improved thermal lifetime and physical compatibility.

Category 2 - Higher Voltage (100 V): Parts with elevated voltage rating suitable for applications where higher voltage margin is required, provided physical dimensions permit board-level integration.

Parameter Comparison

Engineering Selection Recommendations

LP222M063E3P3 (Cornell Dubilier Electronics)

This substitute maintains identical electrical specifications (2200 µF, 63 V, ±20%, 1000 Hrs @ 105°C) and is fully compatible with the LP222M063C7P3 at the circuit level. The primary difference is physical dimension: the LP222M063E3P3 has a smaller height (1.181" vs. 1.575") and larger diameter (1.181" vs. 0.984"). This part is suitable for applications where vertical space is constrained. Both parts are ROHS3 compliant and Active in product status. The LP222M063E3P3 includes specified ESR of 113 mOhm @ 120Hz, providing additional performance data for ripple current calculations.

LP222M100H7P3 (Cornell Dubilier Electronics)

This substitute increases the voltage rating to 100 V while maintaining 2200 µF capacitance and ±20% tolerance. The thermal lifetime remains 1000 Hrs @ 105°C. The LP222M100H7P3 is suitable for applications requiring higher voltage margin or operating in circuits with voltage transients. Physical dimensions are larger (1.378" diameter, 1.575" height), requiring verification of board-level space availability. Both parts are ROHS3 compliant and Active. The higher voltage rating provides design flexibility but does not improve thermal performance.

LGY1J222MELZ35 (Nichicon)

This substitute is manufactured by Nichicon and maintains the 2200 µF, 63 V, ±20% electrical specification. The significant advantage is extended thermal lifetime: 5000 Hrs @ 105°C compared to 1000 Hrs for the main part. This extended lifetime is critical for applications requiring long-term reliability in high-temperature environments. Physical dimensions are the smallest among all options (0.866" diameter, 1.457" height), making this part ideal for space-constrained designs. The LGY1J222MELZ35 is ROHS3 compliant and Active in product status. Cross-manufacturer substitution is supported by identical electrical and mechanical parameters.

All three substitute parts are Active products with ROHS3 compliance, ensuring regulatory alignment and supply chain continuity.

Frequently Asked Questions (FAQ)

Q: Can LP222M063E3P3 be used as a direct replacement for LP222M063C7P3?

A: Yes, at the electrical circuit level. Both parts have identical capacitance (2200 µF), voltage rating (63 V), tolerance (±20%), and thermal lifetime (1000 Hrs @ 105°C). Physical dimensions differ: the LP222M063E3P3 is shorter (1.181" height) but wider (1.181" diameter). Board layout must accommodate these dimensional changes. Lead spacing remains identical at 0.394" (10.00mm).

Q: When should LP222M100H7P3 be selected instead of LP222M063C7P3?

A: The LP222M100H7P3 is selected when the application circuit operates at voltages exceeding 63 V or when voltage transients require additional safety margin. The 100 V rating provides higher voltage headroom. Thermal performance (1000 Hrs @ 105°C) is identical. Physical dimensions are larger and must be verified against available board space. Electrical performance at 63 V operation is equivalent to the main part.

Q: What is the primary advantage of LGY1J222MELZ35?

A: The LGY1J222MELZ35 offers extended thermal lifetime of 5000 Hrs @ 105°C, compared to 1000 Hrs for the LP222M063C7P3. This five-fold increase in rated lifetime is critical for applications in high-temperature environments or where long-term reliability is essential. Physical dimensions are the most compact (0.866" diameter). Cross-manufacturer substitution is supported by identical electrical specifications and compliance certifications.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. The LP222M063C7P3, LP222M063E3P3, LP222M100H7P3, and LGY1J222MELZ35 are all ROHS3 compliant. All parts are Active in product status, ensuring regulatory alignment and continued availability.

Q: What is the impact of physical dimension differences on substitution?

A: Physical dimensions affect board-level integration only. All substitute parts maintain identical lead spacing (0.394" / 10.00mm) and through-hole mounting type, ensuring compatibility with existing PCB footprints. Diameter and height variations require verification of available space in the component mounting area. Dimensional constraints may eliminate certain substitutes from consideration in space-limited designs.

Q: Can these parts be used interchangeably in high-ripple-current applications?

A: Ripple current capability is determined by ESR and thermal design. The LP222M063E3P3 and LP222M100H7P3 specify ESR of 113 mOhm @ 120Hz with ripple current ratings provided. The LP222M063C7P3 and LGY1J222MELZ35 do not specify ESR in the provided data. For applications with high ripple current requirements, the LP222M063E3P3 or LP222M100H7P3 are preferred due to specified ESR and ripple current values.

Q: Is cross-manufacturer substitution (CDE to Nichicon) supported?

A: Yes. The LGY1J222MELZ35 (Nichicon) is electrically and mechanically equivalent to the LP222M063C7P3 (Cornell Dubilier Electronics). Both are ROHS3 compliant, Active products with identical capacitance, voltage, tolerance, and operating temperature range. Cross-manufacturer substitution is supported by these matching specifications and regulatory certifications.