LP153M016E5P3 Equivalent & Substitute Parts

Part Overview

The LP153M016E5P3 is a 15000 µF, 16 V aluminum electrolytic capacitor manufactured by Cornell Dubilier Electronics (CDE) in a radial, can snap-in package. This component is designed for general-purpose applications requiring high capacitance at low voltage ratings with a 1000-hour lifetime at 105°C. The part is currently active and in stock with 1080 units available. Substitute parts may be required due to supply constraints, design optimization, or application-specific performance requirements while maintaining functional compatibility within the electrical and mechanical parameters of the original specification.

Substiute Parts

LP153M016E5P3

Cornell Dubilier Electronics (CDE)In Stock: 1133LP153M016E5P3 Datasheet

Current PartRFQ

MAL225922152E3

Vishay Beyschlag/Draloric/BC ComponentsIn Stock: 1840MAL225922152E3 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the LP153M016E5P3 is determined by strict adherence to the following electrical and mechanical parameters:

Critical Matching Parameters:

• Capacitance value: 15000 µF (±20% tolerance band)
• Voltage rating: 16 V minimum
• Polarization: Polar (aluminum electrolytic)
• Package type: Radial, Can - Snap-In
• Lead spacing: 0.394" (10.00mm)
• Mounting type: Through Hole
• Operating temperature range: -40°C ~ 105°C minimum
• RoHS compliance: ROHS3 Compliant

The substitute part MAL225922152E3 does not meet the critical capacitance matching requirement. This part has a capacitance of 1500 µF, which falls outside the acceptable substitution range for the LP153M016E5P3 (15000 µF ±20%). The voltage rating of 200 V exceeds the original specification of 16 V, and the physical dimensions differ. Therefore, MAL225922152E3 is not a functional equivalent for direct substitution in applications requiring the LP153M016E5P3 specification.

Parameter Comparison

Engineering Selection Recommendations

Based on the provided specifications and compliance data, the LP153M016E5P3 is the appropriate component for applications requiring 15000 µF capacitance at 16 V with a 1000-hour lifetime at 105°C. Both the main part and the listed substitute part are ROHS3 compliant and REACH unaffected, meeting current regulatory requirements.

The MAL225922152E3 listed in the substitute field does not qualify as a functional equivalent due to critical parameter mismatches in capacitance (1500 µF vs. 15000 µF), voltage rating (200 V vs. 16 V), and physical dimensions. Selection of an alternative part must be based on matching the exact capacitance value, voltage rating, and package dimensions specified for the LP153M016E5P3.

When sourcing replacement units, verify that the substitute part maintains the same capacitance tolerance (±20%), operating temperature range (-40°C ~ 105°C), polarization (polar), package type (radial, can snap-in), lead spacing (10.00mm), and mounting configuration (through hole) as the original specification.

Frequently Asked Questions (FAQ)

Q: Can MAL225922152E3 be used as a direct replacement for LP153M016E5P3?

A: No. The MAL225922152E3 has a capacitance of 1500 µF, which is 10 times lower than the required 15000 µF specification. This part is not functionally equivalent and will not perform the intended function in the circuit.

Q: What are the critical parameters that determine substitution eligibility?

A: The critical parameters are capacitance value (15000 µF), voltage rating (16 V minimum), polarization (polar), package type (radial, can snap-in), lead spacing (10.00mm), and mounting type (through hole). All substitute parts must match these parameters within the specified tolerance bands.

Q: Are there physical dimension constraints for substitution?

A: Yes. The LP153M016E5P3 has a diameter of 1.181" (30.00mm) and a maximum seated height of 1.378" (35.00mm). Substitute parts must fit within the PCB layout and enclosure space designed for these dimensions. The MAL225922152E3 exceeds these dimensions (1.378" diameter, 1.457" height), making it physically incompatible.

Q: Does the higher voltage rating of MAL225922152E3 make it suitable for the LP153M016E5P3 application?

A: No. While a higher voltage rating does not create an electrical hazard, the capacitance value mismatch (1500 µF vs. 15000 µF) is the disqualifying factor. Voltage rating alone does not determine substitution compatibility.

Q: What compliance certifications apply to the LP153M016E5P3?

A: The LP153M016E5P3 is ROHS3 compliant, REACH unaffected, and classified under ECCN EAR99 and HTSUS 8532.22.0040. These certifications are maintained for regulatory and export purposes.

Q: How does the 1000-hour lifetime at 105°C affect substitution decisions?

A: The 1000-hour lifetime specification defines the expected operational duration under maximum temperature conditions. Substitute parts must meet or exceed this lifetime requirement for equivalent performance. The MAL225922152E3 offers 3000 hours at 105°C, but this advantage is negated by the capacitance mismatch.