LP102M200C9P3 Equivalent & Substitute Parts

Part Overview

The LP102M200C9P3 is a 1000 µF, 200 V aluminum electrolytic capacitor manufactured by Cornell Dubilier Electronics (CDE) in a radial, can snap-in package. This component is rated for 1000 hours at 105°C and is designed for general-purpose applications requiring through-hole mounting. The part is currently active in production with ROHS3 compliance and REACH unaffected status. Equivalent and substitute parts are identified when component availability is limited, supply chain disruptions occur, or design flexibility permits selection from qualified alternatives meeting the same electrical and mechanical specifications.

Substiute Parts

LP102M200C9P3

Cornell Dubilier Electronics (CDE)In Stock: 1133LP102M200C9P3 Datasheet

Current PartRFQ

LP102M200H9P3

Cornell Dubilier Electronics (CDE)In Stock: 1721LP102M200H9P3 Datasheet

SimilarRFQ

LGU2D102MELA

NichiconIn Stock: 829LGU2D102MELA Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the LP102M200C9P3 is determined by strict equivalence across the following critical parameters:

Mandatory Matching Parameters:

• Capacitance: 1000 µF
• Voltage Rating: 200 V
• Tolerance: ±20%
• Package Type: Radial, Can - Snap-In
• Mounting Type: Through Hole
• Lead Spacing: 10.00 mm (0.394")
• Polarization: Polar
• Operating Temperature Range: -40°C to 105°C

Acceptable Variation Parameters:

• Lifetime @ 105°C: Equal to or greater than 1000 hours
• Physical Dimensions: Height and diameter may vary within mechanical compatibility constraints
• ESR (Equivalent Series Resistance): Specification provided or unspecified
• Ripple Current Ratings: Specification provided or unspecified
• Manufacturer: Different manufacturers permitted if all mandatory parameters match

Two substitute parts meet these criteria and are qualified for direct replacement.

Parameter Comparison

Engineering Selection Recommendations

LP102M200H9P3 (Cornell Dubilier Electronics)

This substitute maintains identical electrical specifications and lead spacing as the main part. The primary difference is increased physical diameter (35.00 mm versus 25.00 mm), which requires verification of available board space. The part provides specified ESR and ripple current ratings, enabling precise circuit performance analysis. Both parts share identical lifetime ratings (1000 hours @ 105°C), RoHS3 compliance, and REACH unaffected status. Selection is appropriate when board layout accommodates the larger diameter or when ESR specification is required for circuit design validation.

LGU2D102MELA (Nichicon)

This substitute matches all mandatory electrical and mechanical parameters with identical physical dimensions to the main part (25.00 mm diameter). The significant advantage is extended lifetime rating of 3000 hours at 105°C, providing enhanced reliability margin in applications subject to sustained thermal stress. The part maintains ROHS3 compliance and REACH unaffected status. Ripple current specifications are provided for both low and high frequency operation. Selection is appropriate for applications requiring extended operational life or when thermal cycling is anticipated.

Both substitutes are active products with current manufacturing status and established supply availability.

Frequently Asked Questions (FAQ)

Q: Can LP102M200H9P3 be used as a direct replacement for LP102M200C9P3?

A: Yes. Both parts share identical capacitance (1000 µF), voltage rating (200 V), tolerance (±20%), lead spacing (10.00 mm), package type (radial snap-in), and lifetime rating (1000 hours @ 105°C). The primary consideration is physical diameter: LP102M200H9P3 measures 35.00 mm diameter compared to 25.00 mm for the main part. Board layout must accommodate this larger diameter.

Q: Can LGU2D102MELA be used as a direct replacement for LP102M200C9P3?

A: Yes. Both parts share identical capacitance (1000 µF), voltage rating (200 V), tolerance (±20%), lead spacing (10.00 mm), package type (radial snap-in), and physical dimensions (25.00 mm diameter, 50.00 mm height). LGU2D102MELA provides extended lifetime (3000 hours @ 105°C) compared to 1000 hours for the main part, representing an enhanced specification.

Q: What is the significance of the diameter difference between LP102M200C9P3 and LP102M200H9P3?

A: The LP102M200H9P3 has a larger diameter (35.00 mm) than the main part (25.00 mm) while maintaining identical height (50.00 mm) and lead spacing (10.00 mm). This difference affects board layout and available mounting space. Electrical performance and thermal characteristics remain equivalent. Physical clearance verification is required before selection.

Q: Does the extended lifetime of LGU2D102MELA affect circuit performance?

A: No. Extended lifetime (3000 hours @ 105°C versus 1000 hours) indicates longer operational durability under thermal stress but does not alter electrical characteristics. Capacitance, voltage rating, tolerance, ESR, and ripple current specifications remain independent of lifetime rating. The extended lifetime provides additional reliability margin in applications subject to sustained elevated temperatures.

Q: Are all three parts RoHS3 compliant?

A: Yes. LP102M200C9P3, LP102M200H9P3, and LGU2D102MELA are all ROHS3 compliant and REACH unaffected, meeting current environmental and regulatory requirements for electronic component manufacturing and distribution.

Q: What is the significance of ESR specification in LP102M200H9P3?

A: ESR (Equivalent Series Resistance) of 250 mOhm @ 120 Hz is provided for LP102M200H9P3 but not specified for the main part or LGU2D102MELA. ESR affects circuit performance in high-frequency applications and ripple current handling. When ESR specification is critical to circuit design, LP102M200H9P3 provides this parameter for validation. The main part and LGU2D102MELA may be used when ESR specification is not a design requirement.

Q: Can these parts be used interchangeably in all applications?

A: Interchangeability is determined by three factors: (1) electrical specifications match (capacitance, voltage, tolerance, lifetime), (2) physical dimensions fit available board space, and (3) ESR and ripple current specifications meet circuit requirements if specified. All three parts meet electrical equivalence. Physical dimension verification is required for LP102M200H9P3 due to increased diameter. ESR and ripple current specifications should be evaluated against circuit design requirements.