LNT2E222MSEN Equivalent & Substitute Parts

Part Overview

The LNT2E222MSEN is a 2200 µF, 250 V aluminum electrolytic capacitor manufactured by Nichicon in the LNT series. This radial, can-style component features screw terminals for chassis mount applications and is rated for 2000 hours at 105°C. The part is currently active in production with 1092 units in stock. Equivalent substitute parts are identified when identical electrical specifications, mechanical dimensions, and compliance certifications are maintained across the product line.

Substiute Parts

LNT2E222MSEN

NichiconIn Stock: 1181LNT2E222MSEN Datasheet

Current PartRFQ

LNT2E222MSE

NichiconIn Stock: 824LNT2E222MSE Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the LNT2E222MSEN is determined by strict equivalence across the following critical parameters:

• Capacitance value: 2200 µF (exact match required)
• Voltage rating: 250 V (exact match required)
• Tolerance: ±20% (exact match required)
• Lifetime specification: 2000 Hrs @ 105°C (exact match required)
• Operating temperature range: -25°C ~ 105°C (exact match required)
• Ripple current ratings: 3.2 A @ 120 Hz and 3.84 A @ 10 kHz (exact match required)
• Physical dimensions: 2.008" diameter, 4.055" height, 0.866" lead spacing (exact match required)
• Mounting configuration: Chassis mount with screw terminals (exact match required)
• Compliance: ROHS3 compliant, REACH affected (exact match required)

Only parts meeting all these criteria qualify as direct substitutes within the LNT series.

Parameter Comparison

Engineering Selection Recommendations

Both the LNT2E222MSEN and LNT2E222MSE are active production parts from Nichicon's LNT series with identical electrical and mechanical specifications. Selection between these parts should be based on availability and supply chain requirements. Both parts maintain ROHS3 compliance and REACH regulatory status, ensuring compatibility with current environmental standards. The LNT2E222MSEN currently has higher inventory availability at 1092 units compared to 804 units for the LNT2E222MSE. Either part is suitable for direct substitution in applications requiring 2200 µF, 250 V aluminum electrolytic capacitors with screw terminal mounting.

Frequently Asked Questions (FAQ)

Q: Can LNT2E222MSE replace LNT2E222MSEN in existing designs?

A: Yes. Both parts are parametrically identical across all electrical ratings, physical dimensions, and compliance certifications. Direct substitution is supported without circuit modification.

Q: Are the screw terminal configurations identical between these parts?

A: Yes. Both parts feature identical radial, can-style screw terminal configurations with 0.866" (22.00 mm) lead spacing, supporting direct mechanical interchange in chassis mount applications.

Q: Do both parts meet the same compliance requirements?

A: Yes. Both LNT2E222MSEN and LNT2E222MSE are ROHS3 compliant and REACH affected, meeting current regulatory requirements for electronic component procurement.

Q: What is the significance of the part number suffix difference?

A: The suffix variation (MSEN vs. MSE) reflects internal Nichicon product line designations but does not indicate functional or electrical differences. Both parts are equivalent within the LNT series.

Q: Are there any thermal or ripple current differences between these substitutes?

A: No. Both parts are rated for identical ripple current performance (3.2 A @ 120 Hz, 3.84 A @ 10 kHz) and thermal specifications (2000 Hrs @ 105°C), ensuring equivalent performance in power supply and filtering applications.