LNT2A332MSEN Equivalent & Substitute Parts

Part Overview

The LNT2A332MSEN is a 3300 µF, 100 V aluminum electrolytic capacitor manufactured by Nichicon in the LNT series. This component features radial, can-style construction with screw terminals, designed for chassis mount applications requiring general-purpose energy storage and filtering. The part is Active status and ROHS3 compliant, with a rated lifetime of 2000 hours at 105°C operating temperature. Substitute parts are identified when design requirements necessitate alternative inventory sources or when original stock availability is constrained.

Substiute Parts

LNT2A332MSEN

NichiconIn Stock: 1066LNT2A332MSEN Datasheet

Current PartRFQ

LNT2A332MSE

NichiconIn Stock: 985LNT2A332MSE Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the LNT2A332MSEN is determined by strict equivalence across the following critical parameters:

• Capacitance value: 3300 µF (exact match required)
• Rated voltage: 100 V (exact match required)
• Tolerance: ±20% (exact match required)
• Package type: Radial, Can - Screw Terminals (exact match required)
• Mounting configuration: Chassis Mount (exact match required)
• Physical dimensions: 1.378" Dia (35.00mm), 3.268" Height (exact match required)
• Lead spacing: 0.500" (12.70mm) (exact match required)
• Operating temperature range: -40°C ~ 105°C (exact match required)
• Polarization: Polar (exact match required)

The LNT2A332MSE qualifies as a parametric equivalent substitute based on full alignment with all critical electrical and mechanical parameters listed above.

Parameter Comparison

Engineering Selection Recommendations

Both the LNT2A332MSEN and LNT2A332MSE are Active status components manufactured by Nichicon within the LNT series. Both parts maintain ROHS3 compliance and REACH affected status, meeting current regulatory requirements for industrial and commercial applications. Selection between these parts should be based on inventory availability and supply chain considerations, as electrical and mechanical specifications are equivalent. The LNT2A332MSE represents a direct functional substitute when the primary part is unavailable.

Frequently Asked Questions (FAQ)

Q: Can the LNT2A332MSE be used as a direct replacement for the LNT2A332MSEN?

A: Yes. Both parts share identical capacitance (3300 µF), voltage rating (100 V), tolerance (±20%), physical dimensions, lead spacing, mounting configuration, and operating temperature range. They are parametric equivalents within the LNT series.

Q: Are there differences in ripple current ratings between these parts?

A: The ripple current at 10 kHz differs: LNT2A332MSEN is rated at 4.95 A, while LNT2A332MSE is rated at 3.795 A. Both maintain identical ripple current at 120 Hz (3.3 A). Application circuits requiring high-frequency ripple current handling should account for this specification variance.

Q: Do both parts meet the same compliance standards?

A: Yes. Both the LNT2A332MSEN and LNT2A332MSE are ROHS3 compliant and REACH affected, meeting current environmental and regulatory requirements.

Q: Are the screw terminal connections identical between these parts?

A: Yes. Both parts feature identical radial, can-style construction with screw terminals, 0.500" (12.70mm) lead spacing, and chassis mount configuration. No mechanical or electrical interface modifications are required for substitution.

Q: What is the rated lifetime for both parts?

A: Both parts are rated for 2000 hours at 105°C operating temperature, with an operating temperature range of -40°C to 105°C.