LNT2A153MSEN Equivalent & Substitute Parts

Part Overview

The LNT2A153MSEN is a 15000 µF, 100 V aluminum electrolytic capacitor manufactured by Nichicon in the LNT series. This radial, can-style component features screw terminals for chassis mount applications and is rated for 2000 hours at 105°C operating temperature. The part is Active status and ROHS3 compliant, making it suitable for general-purpose applications requiring high capacitance values in industrial and power supply circuits. Identifying equivalent substitute parts ensures design flexibility, supply chain continuity, and component availability across manufacturing cycles.

Substiute Parts

LNT2A153MSEN

NichiconIn Stock: 1119LNT2A153MSEN Datasheet

Current PartRFQ

LNT2A153MSE

NichiconIn Stock: 1170LNT2A153MSE Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the LNT2A153MSEN is determined by strict equivalence across the following critical parameters:

• Capacitance Value: 15000 µF (exact match required)
• Voltage Rating: 100 V (exact match required)
• Tolerance: ±20% (exact match required)
• Lifetime Rating: 2000 Hrs @ 105°C (exact match required)
• Operating Temperature Range: -40°C ~ 105°C (exact match required)
• Polarization: Polar (exact match required)
• Package Type: Radial, Can - Screw Terminals (exact match required)
• Mounting Configuration: Chassis Mount (exact match required)
• Physical Dimensions: Lead spacing, diameter, and height (exact match required)
• Compliance: ROHS3 Compliant (exact match required)

The LNT2A153MSE qualifies as a parametric equivalent substitute based on full alignment with all critical electrical and mechanical parameters listed above.

Parameter Comparison

Engineering Selection Recommendations

Both the LNT2A153MSEN and LNT2A153MSE are Active status components manufactured by Nichicon with full ROHS3 compliance and REACH compliance status. The LNT2A153MSE is a direct parametric equivalent suitable for applications where the LNT2A153MSEN is specified. The ripple current rating at 10 kHz differs between the two parts (11.7 A versus 8.97 A); circuit design must account for this variance when high-frequency ripple current performance is a critical design parameter. Both parts share identical electrical ratings, mechanical dimensions, and thermal characteristics, ensuring interchangeability in chassis-mount, screw-terminal applications. Component selection should be based on current availability and supply chain requirements.

Frequently Asked Questions (FAQ)

Q: Can the LNT2A153MSE replace the LNT2A153MSEN in all applications?

A: The LNT2A153MSE is a parametric equivalent with identical capacitance, voltage rating, tolerance, temperature rating, and physical dimensions. The ripple current at 10 kHz is lower (8.97 A versus 11.7 A); applications requiring maximum high-frequency ripple current handling must evaluate this difference against circuit requirements.

Q: Are the physical dimensions identical between these two parts?

A: Yes. Both parts feature 2.500" diameter, 4.055" maximum seated height, and 1.126" lead spacing, ensuring identical mounting compatibility in chassis-mount screw-terminal applications.

Q: What compliance certifications apply to both parts?

A: Both the LNT2A153MSEN and LNT2A153MSE are ROHS3 compliant and REACH affected, meeting current environmental and regulatory requirements for industrial and commercial applications.

Q: Are both parts currently available?

A: Both parts carry Active product status. Inventory availability should be confirmed through current supply chain channels, as stock levels vary by distributor and manufacturing cycle.

Q: What is the operating temperature range for these capacitors?

A: Both parts operate across -40°C to 105°C with a rated lifetime of 2000 hours at 105°C, suitable for industrial power supply and general-purpose applications.