LNK4014D-TL Equivalent & Substitute Parts

Part Overview

The LNK4014D-TL is an offline switch flyback converter IC manufactured by Power Integrations, part of the LinkSwitch™-4 series. This isolated power management IC operates at 65 kHz switching frequency with 15 W output power capability and is designed for offline flyback topology applications. The device is RoHS compliant, REACH unaffected, and maintains active product status. Substitute parts are identified when design requirements necessitate alternative part selection due to inventory constraints, supply chain considerations, or application-specific power rating adjustments while maintaining electrical and mechanical compatibility.

Key Parameters

Parameter	Value
Manufacturer	Power Integrations
Series	LinkSwitch™-4
Category	Power Management (PMIC)
Topology	Flyback
Output Isolation	Isolated
Switching Frequency	65 kHz
Voltage Supply Range (Vcc/Vdd)	5V ~ 16.5V
Power Output	15 W
Fault Protection	Over Temperature, Over Voltage, Short Circuit
Operating Temperature Range	-25°C ~ 125°C (TJ)
Package Type	8-SOIC (0.154", 3.90mm Width)
Mounting Type	Surface Mount
Packaging Format	Tape & Reel (TR)
RoHS Status	RoHS Compliant
MSL Rating	1 (Unlimited)
Product Status	Active

Substitute Part Grouping Explanation

Substitute parts for the LNK4014D-TL are qualified based on strict parameter alignment within the LinkSwitch™-4 series. All substitute parts maintain identical electrical and mechanical specifications across the following critical parameters:

Matching Parameters (All Substitutes):

Manufacturer: Power Integrations
Series: LinkSwitch™-4
Topology: Flyback
Output Isolation: Isolated
Switching Frequency: 65 kHz
Voltage Supply Range: 5V ~ 16.5V
Fault Protection: Over Temperature, Over Voltage, Short Circuit
Operating Temperature: -25°C ~ 125°C (TJ)
Package: 8-SOIC (0.154", 3.90mm Width)
Mounting Type: Surface Mount
Packaging: Tape & Reel (TR)
RoHS Status: RoHS Compliant
MSL Rating: 1 (Unlimited)
Product Status: Active

Variable Parameter (Power Rating): The power output rating differentiates substitute parts into two groups: 15 W and 10 W variants. Selection depends on application power requirements.

Parameter Comparison

Part Number	Manufacturer	Series	Power (W)	Switching Frequency (kHz)	Voltage Supply (V)	Package	Inventory (Pcs)	Product Status
LNK4014D-TL	Power Integrations	LinkSwitch™-4	15	65	5 ~ 16.5	8-SOIC	1094	Active
LNK4024D-TL	Power Integrations	LinkSwitch™-4	15	65	5 ~ 16.5	8-SOIC	1500	Active
LNK4004D-TL	Power Integrations	LinkSwitch™-4	15	65	5 ~ 16.5	8-SOIC	2050	Active
LNK4003D-TL	Power Integrations	LinkSwitch™-4	10	65	5 ~ 16.5	8-SOIC	3784	Active
LNK4023D-TL	Power Integrations	LinkSwitch™-4	10	65	5 ~ 16.5	8-SOIC	19048	Active

Engineering Selection Recommendations

15 W Power Rating Substitutes (Direct Equivalents): LNK4024D-TL and LNK4004D-TL are direct electrical and mechanical equivalents to LNK4014D-TL. All three parts share identical power output specifications (15 W), switching frequency (65 kHz), package geometry (8-SOIC), and thermal operating range (-25°C ~ 125°C). Selection among these three parts is determined by inventory availability and supply chain logistics. All three maintain active product status and full RoHS compliance.

10 W Power Rating Substitutes (Reduced Power Applications): LNK4003D-TL and LNK4023D-TL are qualified substitutes for applications requiring 10 W output power. These parts are electrically and mechanically compatible with LNK4014D-TL across all parameters except power rating. Use these substitutes only when application power requirements do not exceed 10 W. Both parts maintain active status and RoHS compliance.

Compliance and Certification: All substitute parts carry identical RoHS compliance status, MSL rating (1 - Unlimited), REACH unaffected designation, and ECCN/HTSUS classifications. No additional qualification or testing is required for substitution within the specified parameter boundaries.

Frequently Asked Questions (FAQ)

Q: Can LNK4024D-TL replace LNK4014D-TL in my design? A: Yes. LNK4024D-TL is a direct substitute with identical electrical specifications (15 W power, 65 kHz switching frequency, 5V ~ 16.5V supply range) and mechanical compatibility (8-SOIC package, surface mount). No design changes are required.

Q: What is the difference between LNK4014D-TL and LNK4003D-TL? A: The primary difference is power output rating. LNK4014D-TL is rated for 15 W, while LNK4003D-TL is rated for 10 W. All other electrical parameters (switching frequency, supply voltage, topology, isolation, protection features) and mechanical specifications (package, mounting type) are identical. LNK4003D-TL is suitable only for applications with power requirements not exceeding 10 W.

Q: Are all substitute parts in the same package? A: Yes. All substitute parts use the 8-SOIC (0.154", 3.90mm Width) package with surface mount configuration. PCB layout and footprint compatibility is maintained across all substitutes.

Q: Do substitute parts require different PCB layout or thermal management? A: No. All substitute parts share identical package dimensions and thermal characteristics within their respective power ratings. PCB layout remains unchanged. Thermal management design should be based on the specific power rating of the selected part.

Q: Which substitute has the highest inventory availability? A: LNK4023D-TL has the highest inventory at 19,048 pieces. This 10 W variant is suitable for applications not requiring the full 15 W capability of LNK4014D-TL.

Q: Can I use a 10 W part (LNK4003D-TL or LNK4023D-TL) in a design specified for 15 W? A: No. Using a 10 W rated part in a 15 W application exceeds the device's power specification and violates electrical design requirements. Use only 15 W rated parts (LNK4014D-TL, LNK4024D-TL, or LNK4004D-TL) for 15 W applications.

Q: Are all parts RoHS compliant? A: Yes. All substitute parts carry RoHS compliant status and are REACH unaffected. No environmental or regulatory differences exist among the substitutes.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message