LMV710M5 Equivalent & Substitute Parts

Part Overview

The LMV710M5 is a general-purpose operational amplifier manufactured by Texas Instruments, housed in a SOT-23-5 surface mount package. This device features rail-to-rail output capability and is designed for low-power analog signal processing applications. The LMV710M5 is classified as obsolete, necessitating identification of active equivalent and substitute components for new designs and production continuity. Active alternatives with compatible electrical and mechanical specifications are available from multiple manufacturers including Analog Devices Inc., Microchip Technology, onsemi, and STMicroelectronics.

Key Parameters

Parameter	Value	Unit
Amplifier Type	General Purpose	—
Number of Circuits	1	—
Output Type	Rail-to-Rail	—
Slew Rate	5	V/µs
Gain Bandwidth Product	5	MHz
Current - Input Bias	4	pA
Voltage - Input Offset	400	µV
Current - Supply	1.17	mA
Current - Output / Channel	40	mA
Voltage - Supply Span (Min)	2.7	V
Voltage - Supply Span (Max)	5.5	V
Operating Temperature	-40 to 85	°C
Mounting Type	Surface Mount	—
Package / Case	SC-74A, SOT-753	—
Supplier Device Package	SOT-23-5	—
RoHS Status	ROHS3 Compliant	—
Moisture Sensitivity Level (MSL)	1 (Unlimited)	—

Substitute Part Grouping Explanation

Substitution of the LMV710M5 is determined by the following critical parameters:

Mechanical Compatibility:

Surface mount technology
SOT-23-5 package footprint (SC-74A, SOT-753 case designation)
Single circuit configuration

Electrical Compatibility:

Rail-to-rail output capability
Supply voltage range: 2.7 V to 5.5 V minimum overlap
General-purpose amplifier classification
Single operational amplifier per package

Performance Envelope:

Slew rate: 5 V/µs or greater
Gain bandwidth product: 5 MHz or greater
Input bias current: 4 pA or lower
Input offset voltage: 400 µV or lower
Output current capability: 40 mA or greater per channel
Supply current: 1.17 mA or lower

Substitute parts are grouped into two categories: direct Texas Instruments equivalents (LMV710M5/NOPB, LMV710M5X/NOPB) and cross-manufacturer alternatives (Analog Devices, Microchip, onsemi, STMicroelectronics) that meet or exceed the specified electrical and mechanical requirements.

Parameter Comparison

Part Number	Manufacturer	Slew Rate (V/µs)	GBW (MHz)	Input Bias (pA)	Input Offset (µV)	Supply Current (mA)	Output Current (mA)	Supply Min (V)	Supply Max (V)	Temp Range (°C)	Package	Status
LMV710M5	Texas Instruments	5	5	4	400	1.17	40	2.7	5.5	-40 to 85	SOT-23-5	Obsolete
LMV710M5/NOPB	Texas Instruments	5	5	4	400	1.17	40	2.7	5.5	-40 to 85	SOT-23-5	Active
LMV710M5X/NOPB	Texas Instruments	5	5	4	400	1.17	40	2.7	5.5	-40 to 85	SOT-23-5	Active
AD8615AUJZ-R2	Analog Devices Inc.	12	24	0.2	23	1.7	150	2.7	5.5	-40 to 125	TSOT-23-5	Active
AD8615AUJZ-REEL	Analog Devices Inc.	12	24	0.2	23	1.7	150	2.7	5.5	-40 to 125	TSOT-23-5	Active
AD8615AUJZ-REEL7	Analog Devices Inc.	12	24	0.2	23	1.7	150	2.7	5.5	-40 to 125	TSOT-23-5	Active
MCP6281T-E/OT	Microchip Technology	2.5	5	1	3000	0.45	25	2.2	6	-40 to 125	SOT-23-5	Active
MCP6L1T-E/OT	Microchip Technology	2.3	2.8	1	1000	0.2	—	2.7	6	-40 to 125	SOT-23-5	Active
NCS2003ASN2T1G	onsemi	12.5	7	1	500	0.3	96	1.7	5.5	-40 to 85	5-TSOP	Active
TS507CLT	STMicroelectronics	0.6	1.9	8000	25	0.85	128	2.7	5.5	0 to 85	SOT-23-5	Active
TS507ILT	STMicroelectronics	0.6	1.9	8000	25	0.85	128	2.7	5.5	-40 to 125	SOT-23-5	Active

Engineering Selection Recommendations

Direct Equivalents (Recommended Primary Substitutes):

LMV710M5/NOPB and LMV710M5X/NOPB are direct functional equivalents manufactured by Texas Instruments. Both parts maintain identical electrical specifications to the obsolete LMV710M5 and are classified as active products. These substitutes provide the highest compatibility for existing designs and require no circuit modifications. Both parts are ROHS3 compliant and carry MSL Level 1 rating.

Cross-Manufacturer Alternatives:

When direct Texas Instruments equivalents are unavailable, the following active alternatives meet the core substitution criteria:

Analog Devices AD8615AUJZ Series (AD8615AUJZ-R2, AD8615AUJZ-REEL, AD8615AUJZ-REEL7): These parts exceed the LMV710M5 specifications in slew rate (12 V/µs), gain bandwidth product (24 MHz), input bias current (0.2 pA), and output current capability (150 mA). Operating temperature range extends to 125°C. Package is TSOT-23-5 (thin variant of SOT-23-5). All three variants are active products with ROHS3 compliance and MSL Level 1 rating.

Microchip MCP6281T-E/OT: Maintains the 5 MHz gain bandwidth product specification. Offers lower supply current (0.45 mA) and extended temperature range (-40°C to 125°C). Input offset voltage is higher at 3 mV. Output current is reduced to 25 mA. Supply voltage range extends to 6 V maximum. SOT-23-5 package. Active product with ROHS3 compliance.

Microchip MCP6L1T-E/OT: Ultra-low power variant with 0.2 mA supply current. Gain bandwidth product is reduced to 2.8 MHz. Input offset voltage is 1 mV. Extended temperature range to 125°C. SOT-23-5 package. Active product with ROHS3 compliance.

onsemi NCS2003ASN2T1G: Exceeds slew rate (12.5 V/µs) and gain bandwidth product (7 MHz) specifications. Supports lower minimum supply voltage (1.7 V). Output current capability is 96 mA. Package is 5-TSOP (compatible footprint). Operating temperature range is -40°C to 85°C. Active product with ROHS3 compliance.

STMicroelectronics TS507CLT and TS507ILT: Both provide higher output current (128 mA) and lower input offset voltage (25 µV). Slew rate and gain bandwidth product are reduced (0.6 V/µs, 1.9 MHz). Input bias current is significantly higher (8 nA). TS507CLT operates 0°C to 85°C; TS507ILT extends to -40°C to 125°C. SOT-23-5 package. Both active products with ROHS3 compliance.

Selection Criteria:

For direct replacement with no design changes: LMV710M5/NOPB or LMV710M5X/NOPB
For enhanced performance and extended temperature range: AD8615AUJZ series
For ultra-low power applications: MCP6L1T-E/OT
For higher output current requirements: TS507 series or NCS2003ASN2T1G
For cost-optimized alternatives: MCP6281T-E/OT or TS507 series

All recommended substitutes are active products with ROHS3 compliance, MSL Level 1 rating, and REACH unaffected status.

Frequently Asked Questions (FAQ)

Q: Can LMV710M5/NOPB be used as a direct replacement for LMV710M5?

A: Yes. LMV710M5/NOPB is a direct functional equivalent with identical electrical specifications and the same SOT-23-5 package. The primary difference is product status: LMV710M5 is obsolete while LMV710M5/NOPB is active. No circuit modifications are required.

Q: What is the difference between LMV710M5/NOPB and LMV710M5X/NOPB?

A: Both parts are functionally identical with matching electrical specifications and SOT-23-5 packaging. The "X" designation in LMV710M5X/NOPB indicates an extended product variant. Both are active products suitable for new designs.

Q: Are the Analog Devices AD8615AUJZ variants pin-compatible with LMV710M5?

A: Yes. The AD8615AUJZ series uses TSOT-23-5 packaging, which maintains the same pin configuration and footprint as SOT-23-5. However, the AD8615AUJZ variants exceed the LMV710M5 specifications in multiple parameters (slew rate, gain bandwidth product, input bias current, output current). Circuit performance will improve but no pin-level modifications are necessary.

Q: What is the difference between AD8615AUJZ-R2, AD8615AUJZ-REEL, and AD8615AUJZ-REEL7?

A: All three variants are electrically identical. The designations indicate packaging and reel configuration for manufacturing. AD8615AUJZ-R2 is supplied in cut tape and Digi-Reel format. AD8615AUJZ-REEL and AD8615AUJZ-REEL7 are reel-based packaging options. Select based on procurement and assembly requirements.

Q: Can MCP6281T-E/OT replace LMV710M5 in all applications?

A: MCP6281T-E/OT meets the core substitution criteria with matching 5 MHz gain bandwidth product and SOT-23-5 packaging. However, output current is reduced from 40 mA to 25 mA, and input offset voltage is higher at 3 mV. Verify that your application tolerates these parameter differences before substitution.

Q: Why does TS507CLT have lower slew rate and gain bandwidth product than LMV710M5?

A: TS507CLT is optimized for different performance characteristics. While slew rate (0.6 V/µs) and gain bandwidth product (1.9 MHz) are lower, the device offers higher output current (128 mA) and significantly lower input offset voltage (25 µV). Select TS507CLT only if your application requires these specific performance trade-offs.

Q: What is the temperature range difference between TS507CLT and TS507ILT?

A: TS507CLT operates from 0°C to 85°C. TS507ILT extends the operating range to -40°C to 125°C. All other electrical specifications are identical. Select TS507ILT for applications requiring extended temperature operation.

Q: Is the NCS2003ASN2T1G package compatible with LMV710M5 PCB layouts?

A: NCS2003ASN2T1G uses 5-TSOP packaging, which is compatible with SOT-23-5 footprints. Pin configuration matches. However, verify PCB layout clearances and thermal considerations, as package dimensions may differ slightly.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All recommended substitute parts listed are ROHS3 compliant with MSL Level 1 (unlimited moisture sensitivity) rating and REACH unaffected status, matching the compliance profile of the original LMV710M5.

Q: Which substitute offers the best performance improvement over LMV710M5?

A: The Analog Devices AD8615AUJZ series provides the most significant performance enhancement with 12 V/µs slew rate (2.4× improvement), 24 MHz gain bandwidth product (4.8× improvement), and 0.2 pA input bias current (20× improvement). Extended operating temperature to 125°C is also provided. Trade-off is slightly higher supply current (1.7 mA vs. 1.17 mA).

Q: Which substitute is most suitable for low-power applications?

A: MCP6L1T-E/OT offers the lowest supply current at 0.2 mA (0.17× the LMV710M5 specification). This device is optimized for battery-powered and energy-constrained applications. Trade-off is reduced gain bandwidth product (2.8 MHz) and unspecified output current capability.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message