LMV710IDBVRG4 Equivalent & Substitute Parts

Part Overview

The LMV710IDBVRG4 is a general purpose operational amplifier manufactured by Texas Instruments, housed in a SOT-23-5 surface mount package. This device features rail-to-rail output capability and is designed for low-power analog signal processing applications. The LMV710IDBVRG4 carries an obsolete product status, necessitating identification of active equivalent and substitute components to maintain design continuity and ensure long-term supply chain reliability.

Key Parameters

Parameter	Value	Unit
Amplifier Type	General Purpose	—
Number of Circuits	1	—
Output Type	Rail-to-Rail	—
Slew Rate	5	V/µs
Gain Bandwidth Product	5	MHz
Current - Input Bias	4	pA
Voltage - Input Offset	400	µV
Current - Supply	1.17	mA
Voltage - Supply Span (Min)	2.7	V
Voltage - Supply Span (Max)	5.5	V
Operating Temperature	-40 to 85	°C
Mounting Type	Surface Mount	—
Package / Case	SC-74A, SOT-753	—
Supplier Device Package	SOT-23-5	—
RoHS Status	ROHS3 Compliant	—
Moisture Sensitivity Level (MSL)	1 (Unlimited)	—

Substitute Part Grouping Explanation

Substitution of the LMV710IDBVRG4 is determined by electrical and mechanical compatibility across the following critical parameters:

Primary Compatibility Criteria:

Amplifier Type: General Purpose
Number of Circuits: 1
Output Type: Rail-to-Rail
Package / Case: SOT-23-5 compatible form factors
Operating Temperature Range: -40°C to 85°C minimum
Supply Voltage Range: Minimum 2.7 V to 5.5 V maximum
RoHS3 Compliance and MSL Level 1

Secondary Electrical Parameters:

Slew Rate: 5 V/µs (baseline)
Gain Bandwidth Product: 5 MHz (baseline)
Current - Input Bias: 4 pA (baseline)
Voltage - Input Offset: 400 µV (baseline)
Current - Supply: 1.17 mA (baseline)

Substitute parts must maintain compatibility within the electrical specifications of the original design. Parts with superior electrical performance (higher slew rate, lower input bias current, lower supply current) are functionally compatible. Parts with degraded performance require design verification.

Parameter Comparison

Parameter	LMV710IDBVRG4	LMV710M5/NOPB	LMV710M5X/NOPB	MAX4322EUK+T	NCS2003ASN2T1G
Manufacturer	Texas Instruments	Texas Instruments	Texas Instruments	Analog Devices Inc./Maxim Integrated	onsemi
Product Status	Obsolete	Active	Active	Active	Active
Amplifier Type	General Purpose	General Purpose	General Purpose	General Purpose	General Purpose
Number of Circuits	1	1	1	1	1
Output Type	Rail-to-Rail	Rail-to-Rail	Rail-to-Rail	Rail-to-Rail	Rail-to-Rail
Slew Rate (V/µs)	5	5	5	2	12.5
Gain Bandwidth Product (MHz)	5	5	5	5	7
Current - Input Bias (pA)	4	4	4	50	1
Voltage - Input Offset (µV)	400	400	400	1200	500
Current - Supply (mA)	1.17	1.17	1.17	0.725	0.3
Voltage - Supply Span Min (V)	2.7	2.7	2.7	2.4	1.7
Voltage - Supply Span Max (V)	5.5	5.5	5.5	6.5	5.5
Operating Temperature (°C)	-40 to 85	-40 to 85	-40 to 85	-40 to 85	-40 to 85
Package / Case	SC-74A, SOT-753	SC-74A, SOT-753	SC-74A, SOT-753	SC-74A, SOT-753	SOT-23-5 Thin, TSOT-23-5
Supplier Device Package	SOT-23-5	SOT-23-5	SOT-23-5	SOT-23-5	5-TSOP
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)

Engineering Selection Recommendations

Direct Substitutes (Highest Compatibility):

LMV710M5/NOPB and LMV710M5X/NOPB are direct substitutes for the obsolete LMV710IDBVRG4. Both parts are manufactured by Texas Instruments, share identical electrical specifications, and are housed in the same SOT-23-5 package. Both parts carry active product status with substantial inventory availability (66,100 and 66,200 units respectively). These substitutes require no design modifications and provide pin-for-pin compatibility. Both are ROHS3 compliant with MSL Level 1 rating.

Alternative Substitutes (Functional Compatibility with Design Considerations):

MAX4322EUK+T (Analog Devices Inc./Maxim Integrated) is functionally compatible with the LMV710IDBVRG4 within the same SOT-23-5 package form factor. This device maintains the 5 MHz gain bandwidth product and -40°C to 85°C operating temperature range. The MAX4322EUK+T exhibits lower supply current (0.725 mA versus 1.17 mA) and extended supply voltage range (2.4 V to 6.5 V). However, the slew rate is reduced to 2 V/µs and input bias current is elevated to 50 nA. This substitute is suitable for applications where reduced slew rate and higher input bias current do not degrade system performance.

NCS2003ASN2T1G (onsemi) offers enhanced electrical performance with 12.5 V/µs slew rate, 7 MHz gain bandwidth product, and 1 pA input bias current. Supply current is significantly reduced to 0.3 mA. The device operates across 1.7 V to 5.5 V supply range. Package designation is 5-TSOP (SOT-23-5 Thin variant), maintaining mechanical compatibility. This substitute is suitable for applications requiring superior dynamic performance and lower power consumption.

All substitute parts maintain ROHS3 compliance and MSL Level 1 rating, ensuring regulatory and environmental compatibility.

Frequently Asked Questions (FAQ)

Q: Can LMV710M5/NOPB directly replace LMV710IDBVRG4 without design changes?

A: Yes. LMV710M5/NOPB is a direct substitute with identical electrical specifications, same SOT-23-5 package, and pin-for-pin compatibility. No circuit modifications are required.

Q: What is the difference between LMV710M5/NOPB and LMV710M5X/NOPB?

A: Both parts are electrically and mechanically identical. The difference lies in packaging format: LMV710M5/NOPB is supplied in Cut Tape (CT) & Digi-Reel format, while LMV710M5X/NOPB is also supplied in Cut Tape (CT) & Digi-Reel format. Both are active products with equivalent inventory availability and specifications.

Q: Is MAX4322EUK+T a suitable replacement for LMV710IDBVRG4?

A: MAX4322EUK+T is functionally compatible within the same SOT-23-5 package. However, design verification is required for applications sensitive to slew rate (2 V/µs versus 5 V/µs) and input bias current (50 nA versus 4 pA). The device offers lower supply current and extended voltage range, making it suitable for power-constrained applications.

Q: What are the advantages of NCS2003ASN2T1G over the original LMV710IDBVRG4?

A: NCS2003ASN2T1G provides superior slew rate (12.5 V/µs), higher gain bandwidth product (7 MHz), lower input bias current (1 pA), and significantly reduced supply current (0.3 mA). The device operates across a wider supply voltage range (1.7 V to 5.5 V). These improvements make it suitable for high-speed and low-power applications.

Q: Are all substitute parts available in the same package?

A: LMV710M5/NOPB, LMV710M5X/NOPB, and MAX4322EUK+T are housed in standard SOT-23-5 packages. NCS2003ASN2T1G uses a 5-TSOP (SOT-23-5 Thin) variant, which maintains mechanical compatibility with standard SOT-23-5 footprints on PCBs designed with appropriate clearance.

Q: Do all substitute parts meet RoHS3 and MSL requirements?

A: Yes. All substitute parts listed are ROHS3 compliant with MSL Level 1 (Unlimited) rating, matching the compliance profile of the original LMV710IDBVRG4.

Q: Which substitute should be selected for a new design?

A: For new designs, LMV710M5/NOPB or LMV710M5X/NOPB are recommended as primary choices due to active product status, identical specifications, and high inventory availability. NCS2003ASN2T1G is recommended for applications requiring enhanced performance metrics. MAX4322EUK+T is suitable for power-constrained applications where reduced slew rate is acceptable.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message