LMV710IDBVRE4 Equivalent & Substitute Parts

Part Overview

The LMV710IDBVRE4 is a general purpose operational amplifier manufactured by Texas Instruments, housed in a SOT-23-5 surface mount package. This device features rail-to-rail output capability and is designed for low-power analog signal processing applications. The LMV710IDBVRE4 carries an obsolete product status, necessitating identification of active equivalent and substitute components for new designs and ongoing production requirements. Substitute parts must maintain functional compatibility across critical electrical parameters including supply voltage range, output type, package configuration, and operating temperature specifications.

Key Parameters

Parameter	Value	Unit
Amplifier Type	General Purpose	—
Number of Circuits	1	—
Output Type	Rail-to-Rail	—
Slew Rate	5	V/µs
Gain Bandwidth Product	5	MHz
Current - Input Bias	4	pA
Voltage - Input Offset	400	µV
Current - Supply	1.17	mA
Voltage - Supply Span (Min)	2.7	V
Voltage - Supply Span (Max)	5.5	V
Operating Temperature	-40 to 85	°C
Mounting Type	Surface Mount	—
Package / Case	SC-74A, SOT-753	—
Supplier Device Package	SOT-23-5	—
RoHS Status	ROHS3 Compliant	—
Moisture Sensitivity Level (MSL)	1 (Unlimited)	—

Substitute Part Grouping Explanation

Substitution eligibility for the LMV710IDBVRE4 is determined by strict alignment with the following critical parameters:

Primary Compatibility Criteria:

Amplifier Type: General Purpose
Number of Circuits: 1
Output Type: Rail-to-Rail
Package / Case: SOT-23-5 compatible (SC-74A, SOT-753, or TSOT-23-5)
Mounting Type: Surface Mount
Supply Voltage Range: Minimum 2.7 V, Maximum 5.5 V (or compatible overlap)
Operating Temperature: -40°C to 85°C (or extended range)
RoHS Compliance: ROHS3 Compliant

Secondary Performance Parameters: Substitute parts must operate within the electrical specifications of the original device. Variations in slew rate, gain bandwidth product, input bias current, input offset voltage, and supply current are acceptable provided they do not degrade system performance in the target application.

The following substitute parts meet these criteria and are classified as direct equivalents or functional alternatives.

Parameter Comparison

Parameter	LMV710IDBVRE4	LMV710M5/NOPB	LMV710M5X/NOPB	MCP6L1T-E/OT	NCS2003ASN2T1G
Manufacturer	Texas Instruments	Texas Instruments	Texas Instruments	Microchip Technology	onsemi
Product Status	Obsolete	Active	Active	Active	Active
Amplifier Type	General Purpose	General Purpose	General Purpose	General Purpose	General Purpose
Number of Circuits	1	1	1	1	1
Output Type	Rail-to-Rail	Rail-to-Rail	Rail-to-Rail	Rail-to-Rail	Rail-to-Rail
Slew Rate (V/µs)	5	5	5	2.3	12.5
Gain Bandwidth Product (MHz)	5	5	5	2.8	7
Current - Input Bias (pA)	4	4	4	1	1
Voltage - Input Offset (µV)	400	400	400	1000	500
Current - Supply (mA)	1.17	1.17	1.17	0.2	0.3
Voltage - Supply Span Min (V)	2.7	2.7	2.7	2.7	1.7
Voltage - Supply Span Max (V)	5.5	5.5	5.5	6	5.5
Operating Temperature (°C)	-40 to 85	-40 to 85	-40 to 85	-40 to 125	-40 to 85
Mounting Type	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount
Package / Case	SC-74A, SOT-753	SC-74A, SOT-753	SC-74A, SOT-753	SC-74A, SOT-753	SOT-23-5 Thin, TSOT-23-5
Supplier Device Package	SOT-23-5	SOT-23-5	SOT-23-5	SOT-23-5	5-TSOP
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)

Engineering Selection Recommendations

Direct Equivalents (Texas Instruments LMV710 Series):

LMV710M5/NOPB and LMV710M5X/NOPB are direct functional equivalents to the LMV710IDBVRE4. Both parts are manufactured by Texas Instruments, share identical electrical specifications, and are housed in the same SOT-23-5 package. Both parts carry Active product status, ensuring long-term availability and supply chain continuity. These components are recommended as primary substitutes for applications requiring exact parameter matching and proven design compatibility.

Alternative Substitutes (Cross-Manufacturer Options):

MCP6L1T-E/OT (Microchip Technology) and NCS2003ASN2T1G (onsemi) are functional alternatives that meet the core compatibility criteria. Both devices feature rail-to-rail output, single-circuit general purpose amplifier architecture, and SOT-23-5 package compatibility. These alternatives offer distinct performance trade-offs:

MCP6L1T-E/OT provides reduced supply current consumption (0.2 mA versus 1.17 mA) and extended operating temperature range (-40°C to 125°C), making it suitable for low-power and high-temperature applications. However, slew rate and gain bandwidth product are reduced compared to the original specification.

NCS2003ASN2T1G offers enhanced slew rate (12.5 V/µs) and gain bandwidth product (7 MHz), supporting higher-speed signal processing requirements. This device also provides lower minimum supply voltage (1.7 V), enabling operation in ultra-low-voltage systems.

All substitute parts maintain ROHS3 compliance, MSL Level 1 rating, and surface mount configuration. Selection should be based on specific application requirements regarding power consumption, temperature range, and signal processing speed.

Frequently Asked Questions (FAQ)

Q: Can LMV710M5/NOPB and LMV710M5X/NOPB be used interchangeably with LMV710IDBVRE4?

A: Yes. Both parts are manufactured by Texas Instruments and share identical electrical specifications, package configuration (SOT-23-5), and functional characteristics with the LMV710IDBVRE4. The primary difference is product status: LMV710M5/NOPB and LMV710M5X/NOPB are Active products with established supply chains, while LMV710IDBVRE4 is Obsolete. These parts are direct substitutes suitable for new designs and production transitions.

Q: What are the key differences between the Texas Instruments LMV710 variants and the Microchip MCP6L1T-E/OT?

A: The MCP6L1T-E/OT maintains rail-to-rail output, single-circuit general purpose amplifier architecture, and SOT-23-5 package compatibility. However, it operates at significantly lower supply current (0.2 mA versus 1.17 mA), features reduced slew rate (2.3 V/µs versus 5 V/µs), and supports extended operating temperature range (-40°C to 125°C versus -40°C to 85°C). The MCP6L1T-E/OT is suitable for power-constrained and high-temperature applications where the reduced performance parameters are acceptable.

Q: Is the NCS2003ASN2T1G package compatible with SOT-23-5 footprints?

A: The NCS2003ASN2T1G is housed in a 5-TSOP package (SOT-23-5 Thin, TSOT-23-5), which is mechanically and electrically compatible with standard SOT-23-5 footprints. Pin configuration and spacing conform to SOT-23-5 standards, enabling direct PCB layout compatibility. However, verification of specific PCB design requirements is necessary for applications with tight mechanical tolerances.

Q: What supply voltage range must be maintained for all substitute parts?

A: The LMV710IDBVRE4 operates across a 2.7 V to 5.5 V supply range. LMV710M5/NOPB, LMV710M5X/NOPB, and NCS2003ASN2T1G maintain this identical range. MCP6L1T-E/OT extends the maximum supply voltage to 6 V while maintaining the 2.7 V minimum. All substitute parts are compatible with standard 3.3 V and 5 V supply systems.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. LMV710M5/NOPB, LMV710M5X/NOPB, MCP6L1T-E/OT, and NCS2003ASN2T1G all carry ROHS3 Compliant status and MSL Level 1 (Unlimited) moisture sensitivity rating, matching the environmental compliance profile of the LMV710IDBVRE4.

Q: Which substitute part is recommended for low-power battery-operated applications?

A: MCP6L1T-E/OT is recommended for low-power applications due to its significantly reduced supply current of 0.2 mA compared to 1.17 mA for the LMV710 variants. This 83% reduction in quiescent current extends battery life in portable and remote sensing applications. The trade-off is reduced slew rate and gain bandwidth product, which must be evaluated against specific application signal processing requirements.

Q: Which substitute part supports the highest operating temperature?

A: MCP6L1T-E/OT supports the extended operating temperature range of -40°C to 125°C, compared to -40°C to 85°C for the LMV710IDBVRE4 and other substitutes. This extended range is suitable for industrial, automotive, and high-temperature measurement applications.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message