LMV710IDBVR Equivalent & Substitute Parts

Part Overview

The LMV710IDBVR is a general-purpose operational amplifier manufactured by Texas Instruments, housed in a SOT-23-5 surface mount package. This device features rail-to-rail output capability and is designed for low-power analog signal processing applications. The LMV710IDBVR is classified as obsolete, necessitating identification of active equivalent and substitute components for new designs and production continuity. Substitute parts must maintain electrical and mechanical compatibility while meeting current availability and compliance requirements.

Key Parameters

Parameter	Value	Unit
Amplifier Type	General Purpose	—
Number of Circuits	1	—
Output Type	Rail-to-Rail	—
Slew Rate	5	V/µs
Gain Bandwidth Product	5	MHz
Current - Input Bias	4	pA
Voltage - Input Offset	400	µV
Current - Supply	1.17	mA
Current - Output / Channel	40	mA
Voltage - Supply Span (Min)	2.7	V
Voltage - Supply Span (Max)	5.5	V
Operating Temperature	-40 to 85	°C
Mounting Type	Surface Mount	—
Package / Case	SC-74A, SOT-753	—
Supplier Device Package	SOT-23-5	—
RoHS Status	ROHS3 Compliant	—
Moisture Sensitivity Level	1 (Unlimited)	—

Substitute Part Grouping Explanation

Substitute parts for the LMV710IDBVR are selected based on strict electrical and mechanical compatibility criteria. The primary substitution parameters are:

Mandatory Compatibility Criteria:

Amplifier Type: General Purpose
Number of Circuits: 1
Output Type: Rail-to-Rail
Package / Case: SOT-23-5 compatible (SC-74A, SOT-753, or TSOT-23-5)
Mounting Type: Surface Mount
Voltage - Supply Span: Minimum 2.7 V to 5.5 V overlap required
Operating Temperature: -40°C to 85°C minimum coverage
RoHS3 Compliance: Required

Electrical Performance Parameters: Substitute parts must operate within the specified supply voltage range and temperature range. Slew rate, gain bandwidth product, input bias current, input offset voltage, supply current, and output current are performance characteristics that may vary between substitutes while maintaining functional equivalence for general-purpose amplification applications.

Three substitute parts meet these criteria: LMV710M5/NOPB and LMV710M5X/NOPB (Texas Instruments, Active status), and MCP6L1T-E/OT (Microchip Technology, Active status). The NCS2003ASN2T1G (onsemi) is included as a manufacturer-recommended alternative with extended performance characteristics.

Parameter Comparison

Parameter	LMV710IDBVR	LMV710M5/NOPB	LMV710M5X/NOPB	MCP6L1T-E/OT	NCS2003ASN2T1G
Manufacturer	Texas Instruments	Texas Instruments	Texas Instruments	Microchip Technology	onsemi
Product Status	Obsolete	Active	Active	Active	Active
Amplifier Type	General Purpose	General Purpose	General Purpose	General Purpose	General Purpose
Number of Circuits	1	1	1	1	1
Output Type	Rail-to-Rail	Rail-to-Rail	Rail-to-Rail	Rail-to-Rail	Rail-to-Rail
Slew Rate (V/µs)	5	5	5	2.3	12.5
Gain Bandwidth Product (MHz)	5	5	5	2.8	7
Current - Input Bias (pA)	4	4	4	1	1
Voltage - Input Offset (µV)	400	400	400	1000	500
Current - Supply (mA)	1.17	1.17	1.17	0.2	0.3
Current - Output / Channel (mA)	40	40	40	—	96
Voltage - Supply Span (Min)	2.7 V	2.7 V	2.7 V	2.7 V	1.7 V
Voltage - Supply Span (Max)	5.5 V	5.5 V	5.5 V	6 V	5.5 V
Operating Temperature (°C)	-40 to 85	-40 to 85	-40 to 85	-40 to 125	-40 to 85
Mounting Type	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount
Package / Case	SC-74A, SOT-753	SC-74A, SOT-753	SC-74A, SOT-753	SC-74A, SOT-753	SOT-23-5 Thin, TSOT-23-5
Supplier Device Package	SOT-23-5	SOT-23-5	SOT-23-5	SOT-23-5	5-TSOP
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)

Engineering Selection Recommendations

Direct Substitutes (Identical Electrical Performance):

LMV710M5/NOPB and LMV710M5X/NOPB are direct substitutes for the obsolete LMV710IDBVR. Both parts are manufactured by Texas Instruments and maintain identical electrical specifications, including slew rate (5 V/µs), gain bandwidth product (5 MHz), input bias current (4 pA), input offset voltage (400 µV), supply current (1.17 mA), and output current (40 mA). Both are Active status components with ROHS3 compliance and MSL 1 rating. The primary difference is packaging format: LMV710M5/NOPB is supplied in Cut Tape and Digi-Reel format, while LMV710M5X/NOPB is also available in Cut Tape and Digi-Reel format. Both support the same SOT-23-5 package footprint and are suitable for direct pin-compatible replacement.

Alternative Substitutes (Modified Electrical Performance):

MCP6L1T-E/OT (Microchip Technology) is a manufacturer-recommended alternative that maintains rail-to-rail output, general-purpose amplifier functionality, and SOT-23-5 package compatibility. This part features lower supply current (0.2 mA versus 1.17 mA), reduced input bias current (1 pA versus 4 pA), and extended maximum operating temperature (125°C versus 85°C). The slew rate (2.3 V/µs) and gain bandwidth product (2.8 MHz) are lower than the original specification. This substitute is suitable for applications where lower power consumption and extended temperature range are beneficial, provided the reduced slew rate and bandwidth do not impact circuit performance.

NCS2003ASN2T1G (onsemi) is a manufacturer-recommended alternative with enhanced performance characteristics. This part features higher slew rate (12.5 V/µs), higher gain bandwidth product (7 MHz), higher output current (96 mA), and lower input bias current (1 pA). The supply voltage range extends to 1.7 V minimum, providing broader supply compatibility. The package designation is 5-TSOP (TSOT-23-5), which is mechanically compatible with SOT-23-5 footprints. This substitute is suitable for applications requiring higher performance and lower supply voltage operation.

All substitute parts maintain ROHS3 compliance, MSL 1 rating, and surface mount compatibility required for the original application.

Frequently Asked Questions (FAQ)

Q: Can LMV710M5/NOPB directly replace LMV710IDBVR without circuit modification?

A: Yes. LMV710M5/NOPB is a direct electrical and mechanical equivalent. Both parts share identical specifications for slew rate, gain bandwidth product, input bias current, input offset voltage, supply current, output current, supply voltage range, and operating temperature. The SOT-23-5 package footprint is identical. No circuit modification is required.

Q: What is the difference between LMV710M5/NOPB and LMV710M5X/NOPB?

A: Both parts are electrically identical with matching specifications. The difference is in packaging format and supplier designation. LMV710M5/NOPB and LMV710M5X/NOPB are both supplied in Cut Tape and Digi-Reel format. Selection between these variants depends on procurement and assembly requirements rather than electrical performance.

Q: Can MCP6L1T-E/OT replace LMV710IDBVR in all applications?

A: MCP6L1T-E/OT is functionally compatible but with modified electrical performance. The slew rate is reduced from 5 V/µs to 2.3 V/µs, and gain bandwidth product is reduced from 5 MHz to 2.8 MHz. Supply current is significantly lower (0.2 mA versus 1.17 mA). This substitute is suitable for applications where lower power consumption is prioritized and reduced slew rate and bandwidth do not impact circuit performance. Applications requiring the original 5 V/µs slew rate or 5 MHz bandwidth should use LMV710M5/NOPB or LMV710M5X/NOPB instead.

Q: What are the advantages of NCS2003ASN2T1G as a substitute?

A: NCS2003ASN2T1G offers enhanced performance with higher slew rate (12.5 V/µs versus 5 V/µs), higher gain bandwidth product (7 MHz versus 5 MHz), and higher output current capability (96 mA versus 40 mA). Input bias current is lower (1 pA versus 4 pA). The minimum supply voltage is extended to 1.7 V, enabling operation in lower-voltage applications. The package is TSOT-23-5 (5-TSOP), which is mechanically compatible with SOT-23-5 footprints. This substitute is suitable for applications requiring higher performance margins or lower supply voltage operation.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. LMV710M5/NOPB, LMV710M5X/NOPB, MCP6L1T-E/OT, and NCS2003ASN2T1G are all ROHS3 compliant with MSL 1 (Unlimited) moisture sensitivity rating. All parts are suitable for applications requiring RoHS compliance.

Q: What is the difference between SOT-23-5 and TSOT-23-5 packages?

A: SOT-23-5 and TSOT-23-5 (Thin SOT-23-5) are mechanically compatible packages with identical pin configurations and footprints. TSOT-23-5 is a thinner variant of the standard SOT-23-5 package. Both packages are suitable for the same PCB footprint and assembly process. NCS2003ASN2T1G uses the TSOT-23-5 variant, which is compatible with existing LMV710IDBVR board designs.

Q: Which substitute should be selected for new designs?

A: For new designs requiring identical electrical performance to the original LMV710IDBVR, select LMV710M5/NOPB or LMV710M5X/NOPB. Both are Active status Texas Instruments components with full specification compatibility. For applications prioritizing low power consumption, select MCP6L1T-E/OT. For applications requiring enhanced performance and lower supply voltage operation, select NCS2003ASN2T1G. All substitutes are Active status components with current availability and full compliance certifications.

Q: Is the LMV710IDBVR still available for purchase?

A: LMV710IDBVR is classified as Obsolete. Current inventory is limited (5248 pcs reported). For new production and long-term supply assurance, transition to LMV710M5/NOPB or LMV710M5X/NOPB, which are Active status components with significantly higher inventory levels (66100 and 66200 pcs respectively).

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message