LMV110M5X Equivalent & Substitute Parts

Part Overview

The LMV110M5X is a general-purpose operational amplifier manufactured by Texas Instruments, housed in a SOT-23-5 surface mount package. This device features rail-to-rail output capability and operates across a 2.7 V to 5 V supply voltage range, making it suitable for low-power analog signal processing applications. The part is classified as obsolete, necessitating identification of active equivalent alternatives that maintain functional and mechanical compatibility for ongoing production and maintenance requirements.

Key Parameters

Parameter	Value	Unit
Manufacturer	Texas Instruments	—
Part Number	LMV110M5X	—
Category	Linear, Amplifiers	—
Amplifier Type	General Purpose	—
Number of Circuits	1	—
Output Type	Rail-to-Rail	—
Package / Case	SC-74A, SOT-753	—
Supplier Device Package	SOT-23-5	—
Mounting Type	Surface Mount	—
Voltage - Supply Span (Min)	2.7	V
Voltage - Supply Span (Max)	5	V
Operating Temperature	-40°C ~ 85°C	—
Slew Rate	1	V/µs
-3dB Bandwidth	200	kHz
Current - Supply	130	µA
Product Status	Obsolete	—
RoHS Status	ROHS3 Compliant	—
Moisture Sensitivity Level (MSL)	3 (168 Hours)	—

Substitute Part Grouping Explanation

Substitution of the LMV110M5X is determined by strict adherence to the following electrical and mechanical parameters:

Primary Compatibility Criteria:

Package / Case: SC-74A, SOT-753 (SOT-23-5 supplier device package)
Mounting Type: Surface Mount
Output Type: Rail-to-Rail
Number of Circuits: 1
Voltage - Supply Span: Minimum 2.7 V, Maximum 5 V (or compatible range encompassing this span)
Operating Temperature: -40°C ~ 85°C (or extended range)
Amplifier Type: General Purpose (or compatible types including Zero-Drift and Voltage Feedback variants)

Secondary Compatibility Considerations:

Slew Rate: 1 V/µs (baseline; higher values acceptable)
-3dB Bandwidth: 200 kHz (baseline; higher values acceptable)
Current - Supply: 130 µA (baseline; lower values preferred for power efficiency)
RoHS Compliance: ROHS3 Compliant
REACH Status: REACH Unaffected

The substitute parts listed below satisfy all primary criteria and maintain functional equivalence within the specified electrical operating envelope.

Parameter Comparison

Parameter	LMV110M5X	AD8505ARJZ-R2	AD8515ARTZ-REEL	AD8515ARTZ-REEL7	AD8628WARTZ-RL	FAN4174IS5X	NJM2730F-TE1
Manufacturer	Texas Instruments	Analog Devices Inc.	Analog Devices Inc.	Analog Devices Inc.	Analog Devices Inc.	onsemi	Nisshinbo Micro Devices Inc.
Amplifier Type	General Purpose	General Purpose	General Purpose	General Purpose	Zero-Drift	Voltage Feedback	General Purpose
Number of Circuits	1	1	1	1	1	1	1
Output Type	Rail-to-Rail	Rail-to-Rail	Rail-to-Rail	Rail-to-Rail	Rail-to-Rail	Rail-to-Rail	Rail-to-Rail
Package / Case	SC-74A, SOT-753	SC-74A, SOT-753	SC-74A, SOT-753	SC-74A, SOT-753	SC-74A, SOT-753	SC-74A, SOT-753	SC-74A, SOT-753
Supplier Device Package	SOT-23-5	SOT-23-5	SOT-23-5	SOT-23-5	SOT-23-5	SOT-23-5	SOT-23-5 (MTP5)
Mounting Type	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount
Voltage - Supply Span (Min)	2.7 V	1.8 V	1.8 V	1.8 V	2.7 V	2.3 V	1.8 V
Voltage - Supply Span (Max)	5 V	5 V	5 V	5 V	5 V	5.25 V	5 V
Operating Temperature	-40°C ~ 85°C	-40°C ~ 125°C	-40°C ~ 125°C	-40°C ~ 125°C	-40°C ~ 125°C	-40°C ~ 85°C	-40°C ~ 85°C
Slew Rate	1 V/µs	0.013 V/µs	2.7 V/µs	2.7 V/µs	1 V/µs	3 V/µs	0.4 V/µs
-3dB Bandwidth	200 kHz	—	—	—	2.5 MHz	3.7 MHz	—
Gain Bandwidth Product	—	95 kHz	5 MHz	5 MHz	2.5 MHz	3.7 MHz	1 MHz
Current - Supply	130 µA	15 µA	410 µA	410 µA	850 µA	200 µA	320 µA
Product Status	Obsolete	Discontinued at DiGi Electronics	Active	Active	Active	Active	Active
RoHS Status	ROHS3 Compliant	—	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	RoHS Compliant
Moisture Sensitivity Level (MSL)	3 (168 Hours)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)

Engineering Selection Recommendations

Primary Substitutes (Active Status, Full Compatibility):

The AD8515ARTZ-REEL and AD8515ARTZ-REEL7 are the preferred substitutes for the LMV110M5X. Both parts are manufactured by Analog Devices Inc. and maintain active product status. These devices satisfy all primary compatibility criteria: SOT-23-5 package, rail-to-rail output, single-circuit configuration, and supply voltage range encompassing 2.7 V to 5 V. The AD8515 series offers superior performance characteristics with a slew rate of 2.7 V/µs and gain bandwidth product of 5 MHz, exceeding the baseline LMV110M5X specifications. Both variants are ROHS3 compliant with MSL rating of 1 (Unlimited), providing superior moisture handling compared to the original part's MSL 3 rating. The AD8515ARTZ-REEL7 variant offers higher inventory availability (69,074 pcs) and is supplied in Cut Tape & Digi-Reel® packaging, facilitating both manual and automated assembly operations.

Secondary Substitutes (Active Status, Specialized Characteristics):

The AD8628WARTZ-RL is an active Analog Devices product suitable for applications requiring zero-drift amplifier characteristics. This part maintains identical package, supply voltage range, and slew rate specifications as the LMV110M5X while providing superior input offset voltage performance (1 µV versus unspecified baseline). The automotive-grade designation and extended operating temperature range (-40°C ~ 125°C) provide additional design margin. ROHS3 compliance and MSL 1 rating ensure regulatory and manufacturing compatibility.

The FAN4174IS5X, manufactured by onsemi, is an active voltage feedback amplifier offering enhanced slew rate (3 V/µs) and gain bandwidth product (3.7 MHz). This part operates within the required supply voltage envelope (2.3 V to 5.25 V) and maintains SOT-23-5 package compatibility. Operating temperature range matches the LMV110M5X specification (-40°C ~ 85°C). ROHS3 compliance and MSL 1 rating satisfy regulatory requirements.

Tertiary Substitutes (Limited Availability or Discontinued Status):

The AD8505ARJZ-R2 is discontinued at DiGi Electronics and carries reduced inventory (1,316 pcs). While this part satisfies package and supply voltage requirements, its discontinued status limits long-term availability for production applications. The NJM2730F-TE1, manufactured by Nisshinbo Micro Devices Inc., is an active general-purpose amplifier with lower slew rate (0.4 V/µs) and gain bandwidth product (1 MHz) compared to the LMV110M5X baseline. This part is suitable for applications with relaxed bandwidth requirements and offers the lowest supply current (320 µA) among available substitutes.

Compliance and Certification Summary:

All substitute parts maintain ROHS3 compliance and REACH unaffected status, satisfying environmental and regulatory requirements equivalent to or exceeding the original LMV110M5X specifications. Moisture sensitivity levels for all active substitutes are rated MSL 1 (Unlimited), providing superior handling characteristics compared to the original part's MSL 3 (168 Hours) rating.

Frequently Asked Questions (FAQ)

Q1: Why is the LMV110M5X classified as obsolete, and what does this mean for existing designs?

A: The LMV110M5X is classified as obsolete by Texas Instruments, indicating that the manufacturer has discontinued production and will not accept new orders. Existing inventory may be available through authorized distributors, but long-term supply cannot be guaranteed. Designs currently using this part should transition to active equivalent alternatives to ensure supply chain continuity and support for future production runs.

Q2: What are the primary electrical parameters that determine substitution compatibility?

A: Substitution compatibility is determined by: (1) Package type (SOT-23-5 / SC-74A, SOT-753), (2) Output configuration (Rail-to-Rail), (3) Supply voltage range (minimum 2.7 V, maximum 5 V), (4) Number of circuits (single), (5) Operating temperature range (-40°C ~ 85°C or extended), and (6) Amplifier type (General Purpose or compatible variants). All listed substitute parts satisfy these criteria.

Q3: Can I use the AD8515ARTZ-REEL and AD8515ARTZ-REEL7 interchangeably?

A: Yes. Both AD8515 variants are electrically and mechanically identical. The primary difference is packaging format: AD8515ARTZ-REEL is supplied in Tape & Reel (TR) format, while AD8515ARTZ-REEL7 is supplied in Cut Tape (CT) & Digi-Reel® format. Selection depends on assembly process requirements and inventory management preferences. The AD8515ARTZ-REEL7 variant offers significantly higher inventory availability.

Q4: What is the significance of the MSL (Moisture Sensitivity Level) difference between the LMV110M5X and substitute parts?

A: The LMV110M5X carries an MSL rating of 3 (168 Hours), requiring storage in controlled humidity environments and limiting shelf life after packaging. All substitute parts carry MSL 1 (Unlimited) ratings, eliminating moisture sensitivity constraints and simplifying inventory management. This represents an improvement in manufacturing and logistics efficiency.

Q5: Are there performance trade-offs when substituting the LMV110M5X with the AD8515 series?

A: The AD8515 series offers superior performance characteristics: slew rate increases from 1 V/µs to 2.7 V/µs, and gain bandwidth product increases from 200 kHz to 5 MHz. These enhancements provide faster signal response and wider bandwidth capability. Supply current increases from 130 µA to 410 µA, which may impact power budget in battery-powered applications. For applications requiring identical performance characteristics, the AD8628WARTZ-RL maintains the 1 V/µs slew rate specification.

Q6: Which substitute part should I select for low-power applications?

A: The AD8505ARJZ-R2 offers the lowest supply current at 15 µA, making it optimal for ultra-low-power designs. However, this part is discontinued at DiGi Electronics with limited inventory. For active alternatives, the FAN4174IS5X (200 µA) and NJM2730F-TE1 (320 µA) provide moderate power consumption. The AD8515 series (410 µA) and AD8628WARTZ-RL (850 µA) are suitable for applications where power consumption is not a primary constraint.

Q7: Can I use the AD8628WARTZ-RL as a direct replacement in all applications?

A: The AD8628WARTZ-RL is a zero-drift amplifier variant suitable for applications requiring extremely low input offset voltage (1 µV). While it maintains package and supply voltage compatibility, the higher supply current (850 µA) and automotive-grade designation may introduce unnecessary cost and power consumption for general-purpose applications. Use this part only when zero-drift characteristics are specified in the design requirements.

Q8: What is the difference between the FAN4174IS5X voltage feedback topology and the general-purpose amplifiers?

A: The FAN4174IS5X employs voltage feedback amplifier architecture, optimized for high-speed, wide-bandwidth applications. This topology differs from the general-purpose amplifier architecture used in the LMV110M5X and most substitute parts. The voltage feedback design provides superior slew rate (3 V/µs) and gain bandwidth product (3.7 MHz). Select this part for applications requiring enhanced frequency response and signal fidelity.

Q9: Are all substitute parts RoHS3 compliant?

A: Yes. All substitute parts listed carry ROHS3 compliance certification. The LMV110M5X is also ROHS3 compliant. All parts maintain REACH unaffected status, satisfying environmental and regulatory requirements for European and international markets.

Q10: What packaging options are available for the substitute parts?

A: All substitute parts are supplied in SOT-23-5 surface mount packages (SC-74A, SOT-753 case designation). Packaging format variations include: Tape & Reel (TR) for automated assembly, Cut Tape (CT) & Digi-Reel® for mixed manual/automated operations, and standard cut tape for manual assembly. Selection depends on production volume and assembly process requirements. The AD8515ARTZ-REEL7 variant offers the highest inventory availability in Digi-Reel® format.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message